always67 Posted May 23, 2022 Share Posted May 23, 2022 3 hours ago, ich777 said: This is really strange since it probes against QuickSync and VAAPI and returns that it's successful, after it tries to transcode with VAAPI it fails and ultimately falls back to software encoding. @always67 what have you set in your transcoding settings in Emby? nothing special Quote Link to comment
always67 Posted May 23, 2022 Share Posted May 23, 2022 5 hours ago, ich777 said: Did you try it with Plex? Maybe also try it with Jellyfin. What is the output from: ls -la /dev/dri Can you upload your Diagnostics please? @always67 does it work on your machine? fresh install 6.10 echo "options i915 enable_guc=3" > /boot/config/modprobe.d/i915.conf reboot add /dev/dri to emby/plex docker everything is ok Quote Link to comment
always67 Posted May 23, 2022 Share Posted May 23, 2022 Just now, always67 said: fresh install 6.10 echo "options i915 enable_guc=3" > /boot/config/modprobe.d/i915.conf reboot add /dev/dri to emby/plex docker everything is ok it seems no need for JasperLake to blacklisk the i915 driver the only thing you need to do is enable the GUC/HUC echo "options i915 enable_guc=3" > /boot/config/modprobe.d/i915.conf Quote Link to comment
blinddark Posted August 5, 2022 Share Posted August 5, 2022 Is it Right, "options i915 enable_guc=3" in /boot/config/modprobe.d/i915.conf to use the Intel Low-Power-Hardwarecoder? what is the difference between option 2 and option 3? what does the parameter options i915 enable_fbc=1 mean and is it a must have to set them? i'm using unraid 6.11.0 RC2 with an 11th Gen Intel® Core™ i7-11700 @ 2.50GHz Thanks Quote Link to comment
Sonny1980 Posted May 19, 2023 Share Posted May 19, 2023 On 5/23/2022 at 2:59 PM, tjb_altf4 said: Up and running now Other than doing a nuke and pave, I was running GUI mode this time around too Hey buddy, still using the N6005 with Plex? Can you share the full details of your setup? How does it handle direct play of 4K HDR remux files with bitrates of 60-80 mbps? And 4KH HDR to SDR tone mapping? Sorry for all the questions... I'm looking to build something powerful enough to direct play 4K HDR mostly in the local network, transcode 1-2 files to 1080p remotely and run Sonarr, Radarr, etc but low power consumption as possible. Thanks! Quote Link to comment
ich777 Posted May 20, 2023 Share Posted May 20, 2023 8 hours ago, Sonny1980 said: powerful enough to direct play 4K HDR mostly in the local network, transcode 1-2 files to 1080p remotely and run Sonarr, Radarr, etc but low power consumption as possible. This should be no issue for this chip at all. Quote Link to comment
ich777 Posted May 20, 2023 Share Posted May 20, 2023 On 8/5/2022 at 11:16 PM, blinddark said: Intel Low-Power-Hardwarecoder? You know that this comes with the downside of lower image quality (more blockyness) because the low poer mode was created for video calls, so to speak web cam encoding and decoding. On 8/5/2022 at 11:16 PM, blinddark said: what is the difference between option 2 and option 3? Please read this: https://wiki.archlinux.org/title/intel_graphics#Enable_GuC_/_HuC_firmware_loading On 8/5/2022 at 11:16 PM, blinddark said: what does the parameter options i915 enable_fbc=1 mean and is it a must have to set them? No, not necessary, please read this: https://wiki.archlinux.org/title/intel_graphics#Framebuffer_compression_(enable_fbc) Quote Link to comment
mich2k Posted January 12 Share Posted January 12 On 5/20/2023 at 4:54 AM, ich777 said: You know that this comes with the downside of lower image quality (more blockyness) because the low poer mode was created for video calls, so to speak web cam encoding and decoding. Please read this: https://wiki.archlinux.org/title/intel_graphics#Enable_GuC_/_HuC_firmware_loading No, not necessary, please read this: https://wiki.archlinux.org/title/intel_graphics#Framebuffer_compression_(enable_fbc) Hello, are there any new indications on how to enable GuC / HuC on unraid 6.12? I am running a J6413 processor and facing this issue right now (or does any plugin exist for this?) Thanks Quote Link to comment
ich777 Posted January 13 Share Posted January 13 7 hours ago, mich2k said: are there any new indications on how to enable GuC / HuC on unraid 6.12? I am running a J6413 processor and facing this issue right now It should work right out of the box IIRC but keep in mind that I have not much experience with that processor, do you have Diagnostics with Intel GPU Top installed? Quote Link to comment
mich2k Posted January 13 Share Posted January 13 (edited) 4 hours ago, ich777 said: It should work right out of the box IIRC but keep in mind that I have not much experience with that processor, do you have Diagnostics with Intel GPU Top installed? I did enable mode 3 and now seems to work, cpu is still under heavy load and gpu gets used only 200/300 MHz up to 800MHz (max capacity), from the gpu stats I also see a ton of interrupts/sec, wondering if is normal ^^" I yet have to fully understand the difference between mode 2 and 3, archwiki is quite technical about this I just hope the system is using as much as possible the iGPU since the cpu is a very weak one thankk you for your help edit: this topic is among the first results googling for guc/huc on LP mode, is actually the only reference for unraid and it did help a lot homedata-diagnostics-20240113-1109.zip Edited January 13 by mich2k Quote Link to comment
ich777 Posted January 13 Share Posted January 13 1 hour ago, mich2k said: I did enable mode 3 and now seems to work Are you sure that it doesn't work when don't have option 3 enabled? Usually nowadays the i915 module detects the correct option on it's own and enables it, can you try to delete the i915.conf file from your boot device, reboot, pull fresh Diagnostics and post them here? 1 hour ago, mich2k said: cpu is still under heavy load and gpu gets used only 200/300 MHz up to 800MHz (max capacity) Please don't forget that you maybe also have to transcode the Audio too and depending on what application you are using it's handled differently and will reflect that in the CPU usage. What do you use Emby/Jellyfin/Plex? What kind of media do you try to transcode, do the media file have burned in subtitles? From and what format are you transcoding to? Most people don't think about Audio or burned in subtitles and that could negatively impact CPU usage. 1 hour ago, mich2k said: I also see a ton of interrupts/sec The more your server is doing the more interrupts you will see, regardless of what we are talking about. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.