kftX Posted March 27, 2023 Share Posted March 27, 2023 (edited) 7 minutes ago, Kilrah said: Can you show your template values? If you mean the container template then sure: Else you might need to tell me exactly what you need Hopefully this is it tho! Usually I don't mess much with templates unless absolutely needed (like going for the :25 version of yours and ports) Edited March 27, 2023 by kftX Quote Link to comment
Kilrah Posted March 27, 2023 Author Share Posted March 27, 2023 Yeah, so chown -R 33:33 /mnt/user/nextcloud chmod -R 0770 /mnt/user/nextcloud should do. 1 Quote Link to comment
kftX Posted March 27, 2023 Share Posted March 27, 2023 16 minutes ago, Kilrah said: Yeah, so chown -R 33:33 /mnt/user/nextcloud chmod -R 0770 /mnt/user/nextcloud should do. After running this I was still getting the same error, so I went to the cron settings on a whim and changed from AJAX to Cron And now the error has gone away, so is it fixed or did I just do something to make it not trigger? I changed back to AJAX afterwards and I still get: So now I'm very confused lol Quote Link to comment
Kilrah Posted March 27, 2023 Author Share Posted March 27, 2023 31 minutes ago, kftX said: I went to the cron settings on a whim and changed from AJAX to Cron Ah, never tried AJAX. Recommended method is Cron, with the Nextcloud-Cronjob container as described in the first post. Quote Link to comment
kftX Posted March 27, 2023 Share Posted March 27, 2023 Just now, Kilrah said: Ah, never tried AJAX. Recommended method is Cron, with the Nextcloud-Cronjob container as described in the first post. Yup, I'm gonna play with that next and that's why the red message go to me. I've never played with cron so it's just another chance to learn. In any case, it seems fixed! Thanks for your help Quote Link to comment
Peter Schneider Posted March 30, 2023 Share Posted March 30, 2023 (edited) Is it possible to make the container compatible to "Face Recognition" and NVDIA GPU's? For "Face Recognition" following is needed: - Dlib PHP bindings - PHP Bzip2 For me "Recognize" only isn't working, it misses more than 50% of the people available. Or if anybody can tell me how to get it running, would be great! (NVIDIA compatiblity is no 'must') Maybe you can add it to the container. If its much work, but doable, tell me how to pay you off Edited March 30, 2023 by Peter Schneider Quote Link to comment
Kilrah Posted March 30, 2023 Author Share Posted March 30, 2023 3 hours ago, Peter Schneider said: For me "Recognize" only isn't working, it misses more than 50% of the people available. Was discussed earlier, as far as I know Recognise does work as intended (without GPU accel), it's just... not great. Quote Link to comment
kftX Posted April 14, 2023 Share Posted April 14, 2023 On 3/30/2023 at 5:48 PM, Kilrah said: Was discussed earlier, as far as I know Recognise does work as intended (without GPU accel), it's just... not great. I can vouch for this, it worked for me after your help. It's not amazing but for an open-source option it's not the worst. A quick question: atm I'm using the -25 version but apparently 26 is out. Are you going to make a new branch for people who want to keep up with the latest version? Just curious. Thanks for your time! Quote Link to comment
Kilrah Posted April 14, 2023 Author Share Posted April 14, 2023 (edited) It's been available for a couple of weeks, and is now the default too. Edited April 14, 2023 by Kilrah Quote Link to comment
qw3r7yju4n Posted April 19, 2023 Share Posted April 19, 2023 (edited) I found the Memories app and then your container. I shifted the repository of my nextcloud instance and pulled it down. Running fine but the memories app doesnt see the ffmpeg binary. Is there a location I could tell it? Also Im getting VA-API device (/dev/dri/renderD128) has incorrect permissions. What does this mean? Edited April 19, 2023 by qw3r7yju4n typos Quote Link to comment
Kilrah Posted April 20, 2023 Author Share Posted April 20, 2023 Unless something has changed recently the defaults should work, did you go through the memories app's CLI configuration? Quote Link to comment
qw3r7yju4n Posted April 20, 2023 Share Posted April 20, 2023 no i did not. How would i do that? Ive seen reference to it but not sure how to go about doing it. Quote Link to comment
qw3r7yju4n Posted April 20, 2023 Share Posted April 20, 2023 I chown'd my appdata and share directory's. But now I cant access the website. Remember I migrated directly from the nextcloud official template. Is there something Im missing? Quote Link to comment
qw3r7yju4n Posted April 20, 2023 Share Posted April 20, 2023 Alright fixed that by removing the --user 99:100 command from the nextcloud template. But upon executing the video-setup i get Quote Link to comment
qw3r7yju4n Posted April 20, 2023 Share Posted April 20, 2023 (edited) I have a thought, In my reading I recall a mention that if external storage is enabled that transcoding would be effected. I use nextcloud to share my shares so this transcoding feature is something I cant use if my research was correct. WIth that said, I would like to migrate back to the Nextcloud official, I don't know what the chown command would be to set it back to nobody? Could someone help me out here? Not this chown -R 33:33 /mnt/user/nextcloud/ but maybe this? chown -R 99:100 /mnt/user/nextcloud/ Edited April 20, 2023 by qw3r7yju4n Quote Link to comment
Exord Posted April 25, 2023 Share Posted April 25, 2023 Is it possible to post-install the smbclient? I get the message "smbclient is not installed. Adding "SMB/CIFS", "SMB/CIFS with OC login is not possible". I tried to install smb via the container console with apt-get install smbclient but unfortunately it didn't work. Quote Link to comment
Kilrah Posted April 25, 2023 Author Share Posted April 25, 2023 What's that for exactly? Quote Link to comment
technologiq Posted April 27, 2023 Share Posted April 27, 2023 Hi all, my Nextcloud instance is fine other than crona nd I'm trying to use Nextcloud-cronjob and it spits this back in the logs: ------------------------------------------------------------- Executing Cron Tasks: Thu Apr 27 19:45:00 UTC 2023 ------------------------------------------------------------- > Nextcloud Container ID: 545788c4f8a8 > Running Script: ./run-cron-php.sh Cannot write into "config" directory! This can usually be fixed by giving the web server write access to the config directory. But, if you prefer to keep config.php file read only, set the option "config_is_read_only" to true in it. See https://docs.nextcloud.com/server/26/go.php?to=admin-config > Done Quote Link to comment
Kilrah Posted April 28, 2023 Author Share Posted April 28, 2023 What NC container are you using? Check owner/group/permissions Quote Link to comment
technologiq Posted May 2, 2023 Share Posted May 2, 2023 On 4/28/2023 at 1:23 AM, Kilrah said: What NC container are you using? Check owner/group/permissions Knex666 Quote Link to comment
Kilrah Posted May 2, 2023 Author Share Posted May 2, 2023 Then you probably need to change the NEXTCLOUD_EXEC_USER in the cronjob template to 99. Quote Link to comment
SadRobot11 Posted June 19, 2023 Share Posted June 19, 2023 I migrated to this container from LSIO and I am not able to access my admin account on nextcloud. I might have merged the config files incorreclty or some other thing. Honestly, I barely know what I am doing. So I was able to run occ command user:list and my admin user is there. However when I try to reset the password for this user I get this: Enter a new password: Aborted. user:resetpassword [--password-from-env] [--] <user> i don't get to enter new password, I immediately get the whole prompt above. In case it is important, the admin user is the only user on my nextcloud. Can anyone help me here? If I indeed migrated incorrectly, what is the correct procedure? Quote Link to comment
SadRobot11 Posted June 19, 2023 Share Posted June 19, 2023 25 minutes ago, SadRobot11 said: Aborted. I was able to overcome this issue by adding "-it" after "docker exec" to run occ command. However this didn't solve my original issue, I still can't login even after changing my password. When I try to login in nextcloud WebUI, the login and password fields just reset after a second without any error information: like it attempts to login but then throws me back to square one. Quote Link to comment
SidM Posted June 19, 2023 Share Posted June 19, 2023 Hello everyone, I am currently using the official Nextcloud container from knex666 in connection with MariaDB. I have now discovered the Memories app for myself and also passed my iGPU (Xeon E-2176G) through, but ffmpeg still seems to be missing. Can I now just stop docker and use this one instead? However, I noticed that knex666's docker has multiple paths: Container path: /var/www/html Container Path: /var/www/html/custom_apps Container Path: /var/www/html/config Container Path: /var/www/html/data + my individual paths for external storage. Is that even possible? Do I have to pay more attention? Or is my plan not working at all? I don't want to endanger my data under any circumstances! Thanks very much! Quote Link to comment
Kilrah Posted June 19, 2023 Author Share Posted June 19, 2023 You can just change the repo in your existing template, it's the same container with some packages added so it'll be directly compatible. And yes the knex template is a bit messy with the paths... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.