werkkrew Posted August 16, 2018 Share Posted August 16, 2018 In case anyone is wondering this script is still required and still works for the HighPoint RocketRaid 622 (620) Controller. I also flashed the "Quick" BIOS to the card to put it into JBOD (passthrough) mode, but that was not technically required to get unRaid to see the disks. Quote Link to comment
Renks Posted December 17, 2019 Share Posted December 17, 2019 Hi guys, (sorry for my bad english) I was (am?) using this script. I have a Rocketraid 620. Unraid 6.7.2 Today I've tried to upgrade to Unraid 6.8.0, and 2 of my cache disks where gone (the ones controled by the Rocketraid). Turned virtualization off and nothing. Downgrade to 6.7.2, my disks where back. Advices? Quote Link to comment
Renks Posted December 17, 2019 Share Posted December 17, 2019 Ok, so... I was reading Unraid OS version 6.8 available, and got this: Known Issues and Other Errata In another step toward better security, the USB flash boot device is configured so that programs and scripts residing there cannot be directly executed (this is because the 'x' bit is set now only for directories). Commands placed in the 'go' file still execute because during startup, that file is copied to /tmp first and then executed from there. If you have created custom scripts you may need to take a similar approach. Then, (not after losing files), I've change my "go" file from: /boot/config/custom/enable_ahci.sh To: cp /boot/config/custom/enable_ahci.sh /tmp/enable_ahci.sh chmod 700 /tmp/enable_ahci.sh /tmp/enable_ahci.sh And I'm back online. (Like I said... not after losing files and stuff. Nothing important, everything with backup. Noob learning) Quote Link to comment
limetech Posted December 17, 2019 Share Posted December 17, 2019 1 hour ago, Renks said: Ok, so... I was reading Unraid OS version 6.8 available, and got this: Known Issues and Other Errata In another step toward better security, the USB flash boot device is configured so that programs and scripts residing there cannot be directly executed (this is because the 'x' bit is set now only for directories). Commands placed in the 'go' file still execute because during startup, that file is copied to /tmp first and then executed from there. If you have created custom scripts you may need to take a similar approach. Then, (not after losing files), I've change my "go" file from: /boot/config/custom/enable_ahci.sh To: cp /boot/config/custom/enable_ahci.sh /tmp/enable_ahci.sh chmod 700 /tmp/enable_ahci.sh /tmp/enable_ahci.sh And I'm back online. (Like I said... not after losing files and stuff. Nothing important, everything with backup. Noob learning) Alternately, in your 'go' file change this line: /boot/config/custom/enable_ahci.sh to bash /boot/config/custom/enable_ahci.sh 1 Quote Link to comment
krizi Posted January 12, 2020 Share Posted January 12, 2020 (edited) hi is this script still required? because it says on my machine it is enabled but nothing has changed. Quote Scanning for disabled AHCI devices... Enabling AHCI on PCI ID 0x11030641 i can execute it again and again and every time I see the same. it feels like it's not possible to enable the device? do someone has a hint to this problem? thanks in advance Device: HighPoint Rocket 640L regards krizi Edited January 12, 2020 by krizi typo & add device Quote Link to comment
elkay14 Posted January 13, 2020 Author Share Posted January 13, 2020 On 1/11/2020 at 11:48 PM, krizi said: hi is this script still required? because it says on my machine it is enabled but nothing has changed. i can execute it again and again and every time I see the same. it feels like it's not possible to enable the device? do someone has a hint to this problem? thanks in advance Device: HighPoint Rocket 640L regards krizi It's hard to help you without more information. How many drives are attached to the 640L? They just don't appear in the device list? Perhaps give us output of lspci and dmesg Quote Link to comment
krizi Posted February 4, 2020 Share Posted February 4, 2020 sorry I havent seen you reply earlier. I gave up the card, after I somehow was able to flash the wrong bios but was not able using the same tool to flash the backup of the previous bios. after the flash the devices were not even in card bios listed. if anybody knows how to revert the old bios would be helpfull. regards krizi Quote Link to comment
GazCBG Posted May 1, 2020 Share Posted May 1, 2020 (edited) Just added a Highpoint 620A (2x Sata 6Gb/s on PCIe x2.0) and th drives was shown in unraid 6.8.3. Do I still need to add the script on the first page as unraid is seeing both drives already. Edited May 1, 2020 by GazCBG Quote Link to comment
steven_76 Posted November 9, 2020 Share Posted November 9, 2020 hi, complete noob here to unRAID. have a first test (trial) server online now (lost half a day with the usb settings in the BIOS). anyway, i have a Gigabyte 970A-DS3P with 6 SATA ports and a RocketRAID 640L controller in a PCIe slot. the RR controller is listed somewhere in the interface of unRAID, but the disks connected to it do not show up for assignment i have been reading a bit today, and ill try to turn off the virtualization support in the BIOS tonight when i get home, and if that changes nothing ill try the script and report back here on how it goes. i also have a LSI MegaRAID SAS 9260-8i coming in this week, and ill report on that as well. other noobs could benefit from my experience maybe )) br s Quote Link to comment
steven_76 Posted November 11, 2020 Share Posted November 11, 2020 On 11/9/2020 at 2:13 PM, steven_76 said: hi, complete noob here to unRAID. have a first test (trial) server online now (lost half a day with the usb settings in the BIOS). anyway, i have a Gigabyte 970A-DS3P with 6 SATA ports and a RocketRAID 640L controller in a PCIe slot. the RR controller is listed somewhere in the interface of unRAID, but the disks connected to it do not show up for assignment i have been reading a bit today, and ill try to turn off the virtualization support in the BIOS tonight when i get home, and if that changes nothing ill try the script and report back here on how it goes. i also have a LSI MegaRAID SAS 9260-8i coming in this week, and ill report on that as well. other noobs could benefit from my experience maybe )) br s everything worked, just as the author of the script explained. a very large thank you to this user ! best regards s. Quote Link to comment
Ahmed Posted July 1, 2021 Share Posted July 1, 2021 will this work for: Marvell Technology Group Ltd. 88SE9230 01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe 2.0 x2 4-port SATA 6 Gb/s RAID Controller [1b4b:9230] (rev 11) Quote Link to comment
JorgeB Posted July 1, 2021 Share Posted July 1, 2021 2 minutes ago, Ahmed said: will this work for: Marvell Technology Group Ltd. 88SE9230 That script is not needed for that controller, it has however known issues with Unraid and is not recommended, but if the drives are not being detected this works for some: https://forums.unraid.net/bug-reports/stable-releases/disks-missing-after-upgrading-to-670-r536/?do=findComment&comment=4583 1 Quote Link to comment
Ahmed Posted July 1, 2021 Share Posted July 1, 2021 8 minutes ago, JorgeB said: That script is not needed for that controller, it has however known issues with Unraid and is not recommended, but if the drives are not being detected this works for some: https://forums.unraid.net/bug-reports/stable-releases/disks-missing-after-upgrading-to-670-r536/?do=findComment&comment=4583 awesome - will give that a go then. thanks heaps. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.