March 17, 20197 yr Altera Quartus Prime: Hi, I'm new to the whole docker thing and was wondering if this docker could be modified to have noVNC and work on unraid? https://github.com/jamieiles/fpga-cmake
March 24, 20197 yr Matlab: Is there any way someone could add a docker running the latest revision of matlab with noVNC?
November 10, 20196 yr On 11/7/2018 at 5:24 PM, Squid said: OTOH with zero testing, etc basically following the dockerHub directions for it. See here https://hub.docker.com/r/mayanedms/mayanedms/ Install PostGres (available in Apps) Add the following environment variables POSTGRES_USER=mayan POSTGRES_DB=mayan POSTGRES_PASSWORD=mayanuserpass Enable dockerHub searching in CA's settings and search for mayanedms Add the following environment variables MAYAN_DATABASE_ENGINE=django.db.backends.postgresql MAYAN_DATABASE_HOST=unRaid's IP address MAYAN_DATABASE_PORT=the port for postgres MAYAN_DATABASE_NAME=mayan MAYAN_DATABASE_PASSWORD=mayanuserpass MAYAN_DATABASE_USER=mayan MAYAN_DATABASE_CONN_MAX_AGE=60 that step dosent work for me no result (Enable dockerHub searching in CA's settings and search for mayanedms)
November 12, 20196 yr Enabled advanced search, type blue iris, click the whale and it should have that one listed using their docker registry listing of https://hub.docker.com/r/jshridha/blueirisThanks! Hope it will work, a bit old though but worth a try and see if it runs.
December 19, 20196 yr On 11/12/2019 at 2:34 PM, Sic79 said: Thanks! Hope it will work, a bit old though but worth a try and see if it runs. Can anyone pls help me get this up ´n running. I see now that the docker is updated and might be worth a try to get running as a docker in unraid. Here is the link https://hub.docker.com/r/jshridha/blueiris
December 19, 20196 yr 4 hours ago, Sic79 said: Can anyone pls help me get this up ´n running. What sort of help do you need? I haven't tried it but the docker run command at that link seems pretty straightforward. Looks like it doesn't even need any ports remapped unless you have conflicts so host would be fine for that. Then I assume that single volume mapping would be your appdata.
December 19, 20196 yr 6 hours ago, trurl said: What sort of help do you need? I haven't tried it but the docker run command at that link seems pretty straightforward. Looks like it doesn't even need any ports remapped unless you have conflicts so host would be fine for that. Then I assume that single volume mapping would be your appdata. Well, I actually got it running but not working correctly. I took me some time to figure out how to connect to the built in VNC first. I think I´ll wait a little longer for a more stable version or if someone brings it in the unraids "appstore" before I test again. Anyways, thanks for the help offer @trurl, much appreciated
January 4, 20206 yr On 12/19/2019 at 8:16 PM, Sic79 said: Well, I actually got it running but not working correctly. I took me some time to figure out how to connect to the built in VNC first. I think I´ll wait a little longer for a more stable version or if someone brings it in the unraids "appstore" before I test again. Anyways, thanks for the help offer @trurl, much appreciated If you give me a few more details i will setup a container, why is vnc even needed? Is there no webinterface? What exactly doesn't work correctly in your setup. Please note that WINE can cause much overhead... Edited January 4, 20206 yr by ich777
January 4, 20206 yr 7 hours ago, ich777 said: If you give me a few more details i will setup a container, why is vnc even needed? Is there no webinterface? What exactly doesn't work correctly in your setup. Please note that WINE can cause much overhead... Hi @ich777, I´m no expert on either this docker or blueiris but I think that VNC is needed for the setup/install part on the startup of the docker(?). I saw on github that there are a webinterface for blueiris here: https://github.com/bp2008/ui3 Hm what do you mean with that WINE can cause much overhead? And the problem I got when trying to install was that I could not get past the installer part. Maybe I could have given it some more time to troubleshoot. But decided I´ll wait and see if there was someone with better knowledge to try it out.
January 4, 20206 yr 1 hour ago, Sic79 said: Hi @ich777, I´m no expert on either this docker or blueiris but I think that VNC is needed for the setup/install part on the startup of the docker(?). I saw on github that there are a webinterface for blueiris here: https://github.com/bp2008/ui3 Hm what do you mean with that WINE can cause much overhead? And the problem I got when trying to install was that I could not get past the installer part. Maybe I could have given it some more time to troubleshoot. But decided I´ll wait and see if there was someone with better knowledge to try it out. I have now plenty of containers (mostly gamservers but also DirsyncPro, RapidPhotoDownloader all with a VNC screen emulation). Overhead means that the container possibly doesn't work as fast as in a native windows environment and eat much more system resources than on windows. Where can i get Blueiris? Have you seen that are other containers like blueiris are available in the Communtiy Applications App.
January 4, 20206 yr I have now plenty of containers (mostly gamservers but also DirsyncPro, RapidPhotoDownloader all with a VNC screen emulation). Overhead means that the container possibly doesn't work as fast as in a native windows environment and eat much more system resources than on windows. Where can i get Blueiris? Have you seen that are other containers like blueiris are available in the Communtiy Applications App. Ok, I see. Thanks for the info. You can get blueiris here: https://github.com/jshridha/docker-blueirisIf you mean blueiris alike NVR docker such as zonemjnder and shinobi yes. Otherwise I have not seen any similar docker .
January 4, 20206 yr 8 minutes ago, Sic79 said: Ok, I see. Thanks for the info. You can get blueiris here: https://github.com/jshridha/docker-blueiris If you mean blueiris alike NVR docker such as zonemjnder and shinobi yes. Otherwise I have not seen any similar docker . This is a container, i need the downloadlink to the original executable.
January 4, 20206 yr This is a container, i need the downloadlink to the original executable. Ah, ok. Then try this: https://blueirissoftware.com/blueiris.exe
January 5, 20206 yr Hi guys, I'm wanting to setup a Taiga container (taiga.io) but am struggling with the non click & install process. Hoping someone can throw together a Taiga image or guide me through whatever I'm missing with manually setting everything up :s This looks like a fantastic Project Management tool & seems to be just what I'm after with my project, I have moved from Trello to Favro & now prefer the style of Taiga. I think this would be a fantastic addition to the Unraid CA Library. There are already dockerhub containers for this but their setup process is not simple for me. integrated db would be very beneficial. plz & thanks?! cheers Edit: So after a lot of trial & error for hours i managed to get it running. for anyone else that stumbles upon this, this is what i've done: Install postgresql from CA, fill your new database info & map the port 5432 to 5432 Download the taiga example files (conf.json & local.py) from benhutchins/taiga & put them in appdata/taiga-benhutchins Edit the conf.json to point the api to your servers ip address ("api": "http://10.1.1.1/api/v1/") & also delete this line ("contribPlugins": ["/plugins/slack/slack.json"],) Edit the local.py & comment out this line (INSTALLED_APPS += ["taiga_contrib_slack"]) find the benhutchins/taiga image in CA by searching more results from docker (advanced setting) & configure it as pictured below. If you have no email server like myself, go to the admin page (10.1.1.1/admin) & make new users in there. The big issues i had were that it seems to not like the port being changed from 80 (though i've read that it should be possible in the backend), so for now i will just remap my current port 80 app to another port. Another issue i frustratingly had was i couldn't access the admin page to make a new user unless i changed the port to anything but 80. But I assume this was simply old cached data causing the issue that i could have easily fixed but didn't think of it at the time. Hope that helps someone. Would love to see a click & install option in the future Edited January 5, 20206 yr by Terror-Gene added link
January 5, 20206 yr 8 hours ago, Terror-Gene said: Hi guys, I'm wanting to setup a Taiga container but am struggling with the non click & install process. Hoping someone can throw together a Taiga image or guide me through whatever I'm missing with manually setting everything up :s This looks like a fantastic Project Management tool & seems to be just what I'm after with my project, I have moved from Trello to Favro & now prefer the style of Taiga. I think this would be a fantastic addition to the Unraid CA Library. There are already dockerhub containers for this but their setup process is not simple for me. integrated db would be very beneficial. plz & thanks?! cheers Please always put a link to the website in your post since not everybody knows what Taiga is... and a google search for Taiga brings up the Taiga...
January 5, 20206 yr Oops, sorry. added! also sorry for the long post. just want to help others in my situation. seems to not be a lot of info i can find on this.
January 8, 20206 yr Hi @ich777, Would it be possible to also request "Zabbix Server" from you?. There are some Zabbix dockers on Dockerhub, but it would also be a nice addtions to have those in Community Applications for easy deployment. https://hub.docker.com/r/zabbix/zabbix-web-nginx-mysql https://hub.docker.com/r/zabbix/zabbix-server-mysql
January 8, 20206 yr 6 hours ago, Sic79 said: Hi @ich777, Would it be possible to also request "Zabbix Server" from you?. There are some Zabbix dockers on Dockerhub, but it would also be a nice addtions to have those in Community Applications for easy deployment. https://hub.docker.com/r/zabbix/zabbix-web-nginx-mysql https://hub.docker.com/r/zabbix/zabbix-server-mysql +1 for Zabbix Server, thanks.
January 8, 20206 yr 16 hours ago, Sic79 said: Hi @ich777, Would it be possible to also request "Zabbix Server" from you?. There are some Zabbix dockers on Dockerhub, but it would also be a nice addtions to have those in Community Applications for easy deployment. https://hub.docker.com/r/zabbix/zabbix-web-nginx-mysql https://hub.docker.com/r/zabbix/zabbix-server-mysql 10 hours ago, klomasdo said: +1 for Zabbix Server, thanks. I will look into this but give me a little bit of time since i'm switching all my existing containers to a new baseimage and debian buster. EDIT: Zabbix should be no problem, keep in mind that you need an extra database container. I will try that when i got back from work and report back. Edited January 9, 20206 yr by ich777
January 9, 20206 yr I will look into this but give me a little bit of time since i'm switching all my existing containers to a new baseimage and debian buster. EDIT: Zabbix should be no problem, keep in mind that you need an extra database container. I will try that when i got back from work and report back.Wow, sounds great! Looking forward to try it out when it’s ready. Skickat från min iPhone med Tapatalk
January 9, 20206 yr 11 hours ago, Sic79 said: Wow, sounds great! Looking forward to try it out when it’s ready. Skickat från min iPhone med Tapatalk I've got a few questions, sorry but haven't got much time to investigate today after work but what's the difference between the server mysql, nginx server web nginx and the agent (that's already available on the CA App)?
January 10, 20206 yr 9 hours ago, ich777 said: I've got a few questions, sorry but haven't got much time to investigate today after work but what's the difference between the server mysql, nginx server web nginx and the agent (that's already available on the CA App)? @ich777Sure, I´ll help explain. Server: Zabbix server is the central process of Zabbix software. The server performs the polling and trapping of data, it calculates triggers, sends notifications to users. It is the central component to which Zabbix agents and proxies report data on availability and integrity of systems. The server can itself remotely check networked services (such as web servers and mail servers) using simple service checks. Web: Zabbix web interface is a part of Zabbix software. It is used to manage resources under monitoring and view monitoring statistics. Agent: Zabbix agent is deployed on a monitoring target to actively monitor local resources and applications (hard drives, memory, processor statistics etc). So all three is a part of getting it up´n running.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.