ClunkClunk Posted December 6, 2010 Share Posted December 6, 2010 I just happened to have the same Simpsons DVD already ripped, so I did some experiments, and found a set of settings that works very nicely and targets the 200MB size you wanted (I was within 10MB on about four different episodes): -f mp4 -X 720 --loose-anamorphic --detelecine --decomb -e x264 -S 180 -2 -T -a 1 -E faac -6 dpl2 -R auto -B 128 -D 1.5 -m -x cabac=0:ref=2:me=umh:bframes=0:weightp=0:8x8dct=0:trellis=0:subme=6 -v 1 Quote Link to comment
tola5 Posted December 8, 2010 Share Posted December 8, 2010 thx for the help I try to remove the 1 of the audio and now I have a nice 200mb file Quote Link to comment
ClunkClunk Posted January 4, 2011 Share Posted January 4, 2011 Here's HandBrake 0.9.5: http://www.clunkclunk.com/HandBrakeCLI-0.9.5-unraid.tgz Quote Link to comment
kapperz Posted January 4, 2011 Share Posted January 4, 2011 Thanks a bunch ClunkClunk. I just saw the new on this today Quote Link to comment
starcat Posted January 7, 2011 Share Posted January 7, 2011 Would be great to have an unMenu package for Handbrake CLI... Quote Link to comment
prostuff1 Posted January 7, 2011 Share Posted January 7, 2011 Would be great to have an unMenu package for Handbrake CLI... It would be simple enough to create one, you could probably do it!! The link above that you download the .tgz file at is really all you need. Take a look at he 'dmidecode' conf file and edit it as need be. There is really not a lot to it. If I get a chance to do it up quick I will, but I am busy with other things right now. Quote Link to comment
ClunkClunk Posted January 7, 2011 Share Posted January 7, 2011 I made an unMENU package, and it appears to work, however I can't get the version checking to complete successfully. I'm not sure exactly what's wrong. Perhaps someone can take a look at it and see where I made a mistake. To use it, have unMENU installed, and drop this conf file in to /boot/packages, then use the unMENU package manager to install. (removed the attachment - use the one two posts after this one) Quote Link to comment
Joe L. Posted January 7, 2011 Share Posted January 7, 2011 I made an unMENU package, and it appears to work, however I can't get the version checking to complete successfully. I'm not sure exactly what's wrong. Perhaps someone can take a look at it and see where I made a mistake. To use it, have unMENU installed, and drop this conf file in to /boot/packages, then use the unMENU package manager to install. Change the line with the test from PACKAGE_VERSION_TEST HandBrakeCLI -u 2>&1 | grep '^HandBrake' | awk '{print $2}' to PACKAGE_VERSION_TEST /usr/local/bin/HandBrakeCLI -u 2>&1 | grep '^HandBrake' | awk '{print $2}' /usr/local/bin is not in unMENU's search path. other than that, you did real well. Joe L. Quote Link to comment
ClunkClunk Posted January 7, 2011 Share Posted January 7, 2011 Joe L., Once again, thanks for your guidance. Attached is an updated unmenu package. handbrake-unmenu-package.conf Quote Link to comment
aiden Posted March 3, 2011 Share Posted March 3, 2011 Hm... why is this not in the list of packages within unMENU? Quote Link to comment
ClunkClunk Posted March 3, 2011 Share Posted March 3, 2011 I haven't checked with Joe L. to see if he wants to include it in unMENU, but I don't see why he wouldn't want to. Quote Link to comment
Joe L. Posted March 3, 2011 Share Posted March 3, 2011 Hm... why is this not in the list of packages within unMENU? Basically because not enough people have confirmed that it works as desired and that is a good candidate to be included as currently defined. Have you used the package.conf file? Did it work as expected? Does it need any changes/improvements? Joe L. Quote Link to comment
aiden Posted March 3, 2011 Share Posted March 3, 2011 Hm... why is this not in the list of packages within unMENU? Basically because not enough people have confirmed that it works as desired and that is a good candidate to be included as currently defined. Have you used the package.conf file? Did it work as expected? Does it need any changes/improvements? Joe L. No, I have not. I was about to embark on an experiment since I have not used handbrake before, and thought I would check its level of integration with the package manager before I installed it manually. Quote Link to comment
Joe L. Posted March 3, 2011 Share Posted March 3, 2011 Hm... why is this not in the list of packages within unMENU? Basically because not enough people have confirmed that it works as desired and that is a good candidate to be included as currently defined. Have you used the package.conf file? Did it work as expected? Does it need any changes/improvements? Joe L. No, I have not. I was about to embark on an experiment since I have not used handbrake before, and thought I would check its level of integration with the package manager before I installed it manually. A properly defined package.conf file just needs to be put in the /boot/packages directory, or in the unmenu directory (and the package manager will then move it to the /boot/packages directory) Once there, the package manager buttons should then just function. Quote Link to comment
aiden Posted March 3, 2011 Share Posted March 3, 2011 A properly defined package.conf file just needs to be put in the /boot/packages directory, or in the unmenu directory (and the package manager will then move it to the /boot/packages directory) I can confirm the package.conf file works perfectly for installing handbrake. I installed it, set it for reinstall on reboot, and rebooted, and it came up as installed with the correct checksum. As far as confirming handbrake works, I don't know that yet. Quote Link to comment
kapperz Posted March 18, 2011 Share Posted March 18, 2011 @ClunkClunk, Should we be using the unMenu .conf to ensure we are using the latest compiled package from you? Quote Link to comment
ClunkClunk Posted March 19, 2011 Share Posted March 19, 2011 kapperz, I haven't updated it beyond 0.9.5, and that's what the current unmenu .conf is referencing. Since the handbrake unmenu .conf isn't distributed as part of Joe L.'s unmenu, there's no current way to autoupdate. However, if there's a desire for me to compile a newer snapshot, or a newer final version comes out, post in this thread, and I can compile and update the .conf file. Quote Link to comment
jamerson9 Posted March 19, 2011 Share Posted March 19, 2011 kapperz, I haven't updated it beyond 0.9.5, and that's what the current unmenu .conf is referencing. Since the handbrake unmenu .conf isn't distributed as part of Joe L.'s unmenu, there's no current way to autoupdate. However, if there's a desire for me to compile a newer snapshot, or a newer final version comes out, post in this thread, and I can compile and update the .conf file. I would appreciate if you could compile a newer snapshot. I've read that they now have better HD audio support that was not supported in 0.9.5. TIA. Quote Link to comment
kapperz Posted March 20, 2011 Share Posted March 20, 2011 ClunkClunk, I have been using 0.9.5 for a while now with no issues so far. Thanks for the help. Quote Link to comment
ClunkClunk Posted March 22, 2011 Share Posted March 22, 2011 Attached are two unMENU .conf files for HandBrake. handbrake-unmenu-package.conf is for installing 0.9.5, the most recent release version of HandBrake (same as what was posted a few months back). handbrake-svn-unmenu-package.conf is for installing the most recent SVN build of HandBrake, 3853 (I haven't tested this one, so please give me feedback). If you're not using unMENU, and still want to use HandBrake, here are the URLs for HandBrake for unRAID: http://www.clunkclunk.com/HandBrakeCLI-0.9.5-unraid.tgz http://www.clunkclunk.com/HandBrakeCLI-svn3853-unraid.tgz handbrake-unmenu-package.conf handbrake-svn-unmenu-package.conf Quote Link to comment
jamerson9 Posted March 23, 2011 Share Posted March 23, 2011 Attached are two unMENU .conf files for HandBrake. handbrake-unmenu-package.conf is for installing 0.9.5, the most recent release version of HandBrake (same as what was posted a few months back). handbrake-svn-unmenu-package.conf is for installing the most recent SVN build of HandBrake, 3853 (I haven't tested this one, so please give me feedback). If you're not using unMENU, and still want to use HandBrake, here are the URLs for HandBrake for unRAID: http://www.clunkclunk.com/HandBrakeCLI-0.9.5-unraid.tgz http://www.clunkclunk.com/HandBrakeCLI-svn3853-unraid.tgz Thank you for the nightly release, it will save me the bother of having to mux in HD audio track back in. I'll report back if there is any problems with it. Quote Link to comment
Bags Posted March 23, 2011 Share Posted March 23, 2011 Do I need to install slackware for this to work or is as simple as downloading the config file to the unmenu folder and restarting unmenu? Quote Link to comment
Joe L. Posted March 23, 2011 Share Posted March 23, 2011 Do I need to install slackware for this to work or is as simple as downloading the config file to the unmenu folder and restarting unmenu? You don't even need to re-start unMENU, just refresh the Pkg Manager page in your browser (or open that page if not currently open) after putting the .conf files in either the /boot/unmenu directory or the /boot/packages directory. Quote Link to comment
Bags Posted March 23, 2011 Share Posted March 23, 2011 Why does safari tell me this is an html file? Quote Link to comment
aht961 Posted March 23, 2011 Share Posted March 23, 2011 Great work, thank you ClunkClunk for this. I am already transcoding the first VIDEO_TS folder. Could I ask for a favor, though (from ClunkClunk or Joe)? - would it be possible to define variables via unMenu like: 1. SOURCE PATH ____ (and here have a file browser to indicate where the source is) 2. DESTINATION PATH ____(once again file browser so the user does not make typo errors in writing the path) 3. PATH to THE PRESET FOLDER 4. HARD CODED PRESETS TO BE CHOSEN from a drop-down menu (the items of this menu will be collected from the preset files available at the previous path, i.e #3). So, the scenario would be to go to the package manager at the unMenu, download, install and re-enable install after reboot. Define the paths and the preset mentioned above and click GO and have your transcoding done. Am I asking for too much? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.