linuxserver.io Posted February 22, 2016 Share Posted February 22, 2016 (edited) Application Name: Muximux Application Site: https://github.com/mescon/Muximux Docker Hub: https://hub.docker.com/r/linuxserver/muximux/ Github: https://github.com/linuxserver/docker-muximux Please post any questions/issues relating to this docker you have in this thread. If you are not using Unraid (and you should be!) then please do not post here, instead head to linuxserver.io to see how to get support. Edited September 14, 2018 by linuxserver.io 1 Quote Link to comment
GoChris Posted February 22, 2016 Share Posted February 22, 2016 Awesome!! Thanks, can't wait to try this out. Quote Link to comment
Capt.Insano Posted February 22, 2016 Share Posted February 22, 2016 When setting up this container in bridge mode port 80 -> port 8080 and setting up the ip:port info for my services within muximux, I just get a 404 error from nginx with muximux. I then used "docker exec -it muximux /bin/bash" and checked if I could ping the ip:port of some of my services, (eg: my deluge ip address & port) but I got an unknown host error. Any advice on setting this up? Thanks! Quote Link to comment
sparklyballs Posted February 22, 2016 Share Posted February 22, 2016 Any advice on setting this up? don't use a port already in use, you're probably using 8080 somewhere else. Quote Link to comment
Capt.Insano Posted February 22, 2016 Share Posted February 22, 2016 Any advice on setting this up? don't use a port already in use, you're probably using 8080 somewhere else. Nope! Sure if that was the case the docker container would not even start it would error out giving a port error. Also, I am able to load the muximux page itself, it is the subpages (Sonarr, Deluge, NZBget etc.) that give the 404 error after being set up to the required IP addresses & ports. Thanks Quote Link to comment
sparklyballs Posted February 22, 2016 Share Posted February 22, 2016 Any advice on setting this up? don't use a port already in use, you're probably using 8080 somewhere else. Nope! Sure if that was the case the docker container would not even start it would error out giving a port error. Also, I am able to load the muximux page itself, it is the subpages (Sonarr, Deluge, NZBget etc.) that give the 404 error after being set up to the required IP addresses & ports. Thanks would if a docker that used the port was in host mode. Quote Link to comment
Capt.Insano Posted February 22, 2016 Share Posted February 22, 2016 currently repulling the muximux image and will retest with completely different ports. will report back! Quote Link to comment
sparklyballs Posted February 22, 2016 Share Posted February 22, 2016 works here, you're holding it wrong..... Quote Link to comment
Capt.Insano Posted February 22, 2016 Share Posted February 22, 2016 works here, you're holding it wrong..... I had the service URLs in as: 192.168.1.2:8112 but is needs to be: http://192.168.1.2:8112 Note to others; http:// is needed prior to any IP addresses being entered!! Thanks for the help sparkly! Quote Link to comment
splnut Posted February 22, 2016 Share Posted February 22, 2016 I have this running under the Apache docker with reverse proxy. I like it better than htpc manage and maraschino. I'll be switching to the docker to make it easier to update. Thanks Quote Link to comment
Pducharme Posted February 22, 2016 Share Posted February 22, 2016 I have this running under the Apache docker with reverse proxy. I like it better than htpc manage and maraschino. I'll be switching to the docker to make it easier to update. Thanks Also have it with Apache Reverse Proxy, but can't make it work. I want it to reply to the "/" of my domain name. How did you make it work ?? Mine is on port 99, so in Apache of the Apache Docker, i tried this (without success) : <Location /> ProxyPass http://192.168.2.6:99 ProxyPassReverse http://192.168.2.6:99 </Location> Quote Link to comment
splnut Posted February 22, 2016 Share Posted February 22, 2016 I'm currently in the process of upgrading my server, but can post my config tomorrow if it's still needed. Quote Link to comment
CHBMB Posted February 22, 2016 Share Posted February 22, 2016 I have this running under the Apache docker with reverse proxy. I like it better than htpc manage and maraschino. I'll be switching to the docker to make it easier to update. Thanks Also have it with Apache Reverse Proxy, but can't make it work. I want it to reply to the "/" of my domain name. How did you make it work ?? Mine is on port 99, so in Apache of the Apache Docker, i tried this (without success) : <Location /> ProxyPass http://192.168.2.6:99 ProxyPassReverse http://192.168.2.6:99 </Location> Try this: <Location /> ProxyPass http://192.168.2.6:99/ ProxyPassReverse http://192.168.2.6:99/ </Location> Quote Link to comment
Pducharme Posted February 22, 2016 Share Posted February 22, 2016 Doesn't work. Same thing, it loads a default empty page : https://monosnap.com/file/y0LXTtBY0r7vYHXrarnxxGX9mxocRE Quote Link to comment
CHBMB Posted February 22, 2016 Share Posted February 22, 2016 Doesn't work. Same thing, it loads a default empty page : https://monosnap.com/file/y0LXTtBY0r7vYHXrarnxxGX9mxocRE Working for me..... Post your Apache default.conf and I'll take a look. Quote Link to comment
Pducharme Posted February 22, 2016 Share Posted February 22, 2016 Doesn't work. Same thing, it loads a default empty page : https://monosnap.com/file/y0LXTtBY0r7vYHXrarnxxGX9mxocRE Working for me..... Post your Apache default.conf and I'll take a look. Here it is (I also have ATV PlexConnect) : <VirtualHost *:443> ServerName mydomain.com ServerAlias mydomain.com ServerAdmin [email protected] DocumentRoot /config/www SSLEngine on SSLProxyEngine On RewriteEngine On Header always set Strict-Transport-Security "max-age=63072000; includeSubdomains; preload" SSLProxyVerify none SSLProtocol -ALL +TLSv1 +TLSv1.1 +TLSv1.2 SSLCipherSuite ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS SSLHonorCipherOrder on SSLCertificateFile /config/keys/ssl.crt SSLCertificateKeyFile /config/keys/private-decrypt-ssl.key SSLCertificateChainFile /config/keys/sub.class1.server.ca.pem SSLProxyCheckPeerCN off SSLProxyCheckPeerName off SSLProxyCheckPeerExpire off <Location /couch> ProxyPass http://192.168.2.6:5050/couch ProxyPassReverse http://192.168.2.6:5050/couch </Location> <Location /> ProxyPass http://192.168.2.6:99/ ProxyPassReverse http://192.168.2.6:99/ </Location> <Location /sonarr> ProxyPass http://192.168.2.6:8989/sonarr ProxyPassReverse http://192.168.2.6:8989/sonarr </Location> <Location /nzbget> ProxyPass http://192.168.2.6:6789/nzbget ProxyPassReverse http://192.168.2.6:6789/nzbget </Location> <Location /watch> ProxyPass http://192.168.2.6:8181 ProxyPassReverse http://192.168.2.6:8181 </Location> <Location /status> ProxyPass http://192.168.2.6:3000 ProxyPassReverse http://192.168.2.6:3000 </Location> <Location /owncloud> ProxyPass http://192.168.2.6:8000 ProxyPassReverse http://192.168.2.6:8000 </Location> <Location /deluge/> RequestHeader append X-Deluge-Base "/deluge/" ProxyPass http://192.168.2.6:9112/ ProxyPassReverse http://192.168.2.6:9112/ </Location> </VirtualHost> <VirtualHost *:443> SSLEngine on SSLProtocol -ALL +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:!LOW::!SSLv2:!EXPORT SSLCertificateFile /plexconnect/trailers.cer SSLCertificateKeyFile /plexconnect/trailers.key ProxyPreserveHost On ProxyPass / http://192.168.2.6:82/ ProxyPassReverse / http://192.168.2.6:82/ ServerName trailers.apple.com </VirtualHost> <VirtualHost *:443> SSLEngine on SSLProtocol -ALL +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:!LOW::!SSLv2:!EXPORT SSLCertificateFile /plexconnect/trailers.cer SSLCertificateKeyFile /plexconnect/trailers.key ProxyPreserveHost On ProxyPass / http://192.168.2.6:82/ ProxyPassReverse / http://192.168.2.6:82/ ServerName atv.plexconnect </VirtualHost> <VirtualHost *:80> ServerName mydomain.com ServerAlias mydomain.com ServerAdmin [email protected] DocumentRoot /config/www </VirtualHost> <VirtualHost *:80> ServerName atv.plexconnect ProxyPreserveHost On ProxyPass / http://192.168.2.6:82/ ProxyPassReverse / http://192.168.2.6:82/ </VirtualHost> <VirtualHost *:80> ServerName trailers.apple.com ProxyPreserveHost On ProxyPass / http://192.168.2.6:82/ ProxyPassReverse / http://192.168.2.6:82/ </VirtualHost> Quote Link to comment
Pducharme Posted February 22, 2016 Share Posted February 22, 2016 scratch that... I restated the Apache Docker and now it works! Only needs I have now is to have a landing page with Status like Live Bandwidth (can use ssh to my router to get it), Status of my Storage (Used on Total space, Like a progress Bar). Quote Link to comment
CHBMB Posted February 22, 2016 Share Posted February 22, 2016 scratch that... I restated the Apache Docker and now it works! Only needs I have now is to have a landing page with Status like Live Bandwidth (can use ssh to my router to get it), Status of my Storage (Used on Total space, Like a progress Bar). I was just about to suggest that as your config looked good. I've been caught out by that one myself on more than one occasion and wasted more hours than I care to admit... Sometime Apache doesn't quite restart after default.conf is modified.... Quote Link to comment
Furby8704 Posted February 23, 2016 Share Posted February 23, 2016 hmmm interesting.... ill move it off the apache server Quote Link to comment
CHBMB Posted February 23, 2016 Share Posted February 23, 2016 hmmm interesting.... ill move it off the apache server Why? It works, I'm only talking about when you edit the default.conf Apache file when Apache is running it occasionally trips up. A proper restart works fine. A normal Apache container startup works fine. Quote Link to comment
theiam79 Posted February 25, 2016 Share Posted February 25, 2016 Everything is working great, just a quick question. Is there a way to add general auth to muximux overall, or will I just need to individually secure everything else? Quote Link to comment
Furby8704 Posted February 25, 2016 Share Posted February 25, 2016 hmmm interesting.... ill move it off the apache server Why? It works, I'm only talking about when you edit the default.conf Apache file when Apache is running it occasionally trips up. A proper restart works fine. A normal Apache container startup works fine. im lost >_< Quote Link to comment
kostecki Posted February 25, 2016 Share Posted February 25, 2016 I'm trying to use this with a reverse proxy in Apache on /muxi. I am, however, having problems with a lot of files not being loaded because it's looking for them at the root on my site. Isn't it possible to set the base url? Quote Link to comment
MyKroFt Posted February 27, 2016 Share Posted February 27, 2016 anyone able to get http://lime-technology.com/forum/index.php?action=unread working in this container for a link? I just get a blank page for some reason..... Also, how do you unselect default in a link, only way I can figure it out is to remove it and add it back without clicking default Myk Quote Link to comment
CHBMB Posted February 28, 2016 Share Posted February 28, 2016 hmmm interesting.... ill move it off the apache server Why? It works, I'm only talking about when you edit the default.conf Apache file when Apache is running it occasionally trips up. A proper restart works fine. A normal Apache container startup works fine. im lost >_< So, I run this Apache Muximux I then use the Apache container to serve muximux to the web via a reverse proxy. What I was referring to was when you edit the default.conf of the Apache container whilst it's running then occasionally the autorestart when it detects the change slips up, necessitating a manual container restart. That's all... No big problem. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.