August 28, 201610 yr I just did it now to be sure, but still the same errors. I had rebooted, and removed\reinstalled the USB Tuner previously. I guess I will just have to wait and hope they fix the kernel. Thanks again, Wob Wob, this is one last test build using the .config from the RC3 release, kind of a last ditch effort.... If you'd like to test it, you can download it here, just replace bzroot, bzimage, bzimage-gui on your flash drive. If you still need to revert to RC3 afterwards then you can do that via the plugin normally.
August 29, 201610 yr Hey CHBMB, Gave it a try, but I still get the same result, Thanks for all your efforts. Wob
August 29, 201610 yr Then it has to be something that has changed in the kernel. Problem with the stick you have is that a lot of manufacturers use that chip and their implementation may not be 100% compliant. I also have just realised that the CrazyCat TBS drivers also contain a lot of none TBS drivers so that may be worth a shot.... Sent from my LG-H815 using Tapatalk
August 30, 201610 yr No joy with CrazyCat TBS.. Aug 30 10:18:44 TheBox kernel: dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware Aug 30 10:18:44 TheBox kernel: usb 4-1: Direct firmware load for dvb-usb-af9015.fw failed with error -2 Aug 30 10:18:44 TheBox kernel: dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2) Aug 30 10:18:44 TheBox kernel: dvb_usb_af9015: probe of 4-1:1.0 failed with error -2 Aug 30 10:18:44 TheBox kernel: usbcore: registered new interface driver dvb_usb_af9015 Thanks anyway, I'll just wait and see if a kernal patch fixes the issue, I don't use the tuner much, so not a huge issue.
September 4, 201610 yr Whet bulid i need to use? No idea, that's up to you to find out, but I'd guess the LibreELEC one. You need to make sure that whatever adaptor you use is compatible with Linux. And I'd recommend either a TBS adapter or one that is found in the Linux kernel. https://www.linuxtv.org/wiki/index.php/Geniatech_T230
September 4, 201610 yr Whet bulid i need to use? No idea, that's up to you to find out, but I'd guess the LibreELEC one. You need to make sure that whatever adaptor you use is compatible with Linux. And I'd recommend either a TBS adapter or one that is found in the Linux kernel. https://www.linuxtv.org/wiki/index.php/Geniatech_T230 Thanks for the quick reply - already purchased it - I 'll try to use in TBS or LibreELEC - i can replace in your system to TBS or LibreELEC?
September 4, 201610 yr Use LibreELEC Sent from my LG-H815 using Tapatalk Thanks, when I got to home i check it out.
September 4, 201610 yr The adapter is recognized Next step is to decide which software to install for TV.
September 4, 201610 yr The adapter is recognized Next step is to decide which software to install for TV. What do you recommend
September 4, 201610 yr The adapter is recognized Next step is to decide which software to install for TV. What do you recommend Mythtv
September 4, 201610 yr The adapter is recognized Next step is to decide which software to install for TV. What do you recommend If you have no rush, I would wait a day or two before installing tvheadend. Then you might get a new and shiny version
September 5, 201610 yr RC5 LibreELEC, TBS CrazyCat, TBS DVB-S/T, TBS DVB-C, and Digital Devices all uploaded. Digital Devices have updated their github with a new release. They never merged my PR, but they may have fixed the issues piotrasd was seeing previously so I've built using their github release. If it still causes problems then I'll do a rebuild with my older patched version.
September 5, 201610 yr It has been a few hours that he did not find channels, what could be the problem? I changed the position of the antenna, and nothing helps.
September 5, 201610 yr Maybe we should move this to a new thread? If you installed my tvheadend container, look in my signature and post in that thread. You need to add muxes for tvheadend to find channels. You only have two muxes.
September 5, 201610 yr My country has only two frequencies (Muxes), but as you said, it was a problem of signature
September 6, 201610 yr Is there something wrong with RC5 ? After updating to this build, my tuner card no longer works. My card is a Hauppauge WinTV HVR400. Shows up in lcpci as: Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04) It usually uses the cx23885 driver, but trying to load this driver results in: modprobe: FATAL: Module cx23885 not found in directory /lib/modules/4.4.19-unRAID Attached is what is seen from the admin panel both before and after update lsmod from rc4 root@tower:~# lsmod | grep cx cx23885 137839 1 altera_ci 7092 1 cx23885 tda18271 32424 3 cx23885 altera_stapl 20796 1 cx23885 videobuf2_dvb 3622 1 cx23885 m88ds3103 11175 1 cx23885 snd_pcm 64936 1 cx23885 snd 37711 3 cx23885,snd_timer,snd_pcm tveeprom 13305 1 cx23885 cx2341x 14109 1 cx23885 videobuf2_dma_sg 6516 1 cx23885 dvb_core 72173 4 cx23885,altera_ci,m88ds3103,videobuf2_dvb rc_core 14707 1 cx23885 videobuf2_v4l2 13519 2 cx23885,videobuf2_dvb videobuf2_core 21807 3 cx23885,videobuf2_v4l2,videobuf2_dvb v4l2_common 2841 4 cx2341x,cx23885,tuner,videobuf2_v4l2 videodev 100108 5 cx2341x,cx23885,tuner,v4l2_common,videobuf2_v4l2
September 6, 201610 yr Out of interest, does one need to update to say RC4 via the normal method before using the plugin, or can you go straight from a DVB RC4 ot DVB RC5 without causing any issues? Thanks, Wob
Archived
This topic is now archived and is closed to further replies.