clevoir Posted March 18, 2018 Share Posted March 18, 2018 (edited) I was running 6.5.0 on a X9CSM motherboard with a E3 1220 V1 CPU, and all was OK. I have just replaced the CPU with a E3 1230v2, and have checked that I am running V2 BIOS The motherboard reports the CPU data OK, but on UnRaid the overall and per core CPU usage is now not being reported. On the previous CPU, the array used to boot straight into Array Started status, with the new CPU there is now a small delay whilst UnRaid reports Mounting Disks and Starting Services? Edited March 18, 2018 by clevoir Quote Link to comment
Frank1940 Posted March 18, 2018 Share Posted March 18, 2018 Two things. First, if you have installed any type of popup or adblocker that you 'whitelist' your unRAID server. Second, what browser are you using? Is it the latest version? If possible, try another browser. (There was some issues a while back with this problem and they were browser related.) Quote Link to comment
clevoir Posted March 18, 2018 Author Share Posted March 18, 2018 (edited) I use Firefox and it worked OK just before I changed CPU, I haven't installed any popup or ad blockers recently either. I have just tried Chrome and have the same issue? PS I have just noticed that it is the same on my Backup array, using both Firefox and Chrome, it is running 6.5.0 too So clearly not related to the CPU change, perhaps a 6.5.0 issue? Edited March 18, 2018 by clevoir Quote Link to comment
digitalfixer Posted March 19, 2018 Share Posted March 19, 2018 I had the same problem on 6.5 rc series and 6.5.0 stable. Tried with Chrome, Firefox and Safari. Same result every time. Rolled back to 6.4.1 and display is ok again. Kevin Quote Link to comment
bonienl Posted March 19, 2018 Share Posted March 19, 2018 Tested Chrome, Firefox, Edge, Safari and Brave. They all work fine. Have no clue what is causing your issue. Quote Link to comment
digitalfixer Posted March 19, 2018 Share Posted March 19, 2018 @bonienl This comment posted right after 6.5.0 install. Includes Diagnostics. Kevin. https://lime-technology.com/forums/topic/70095-unraid-os-version-650-stable-release-available/?tab=comments#comment-641893 Quote Link to comment
sturgismike Posted April 21, 2018 Share Posted April 21, 2018 Whitelist your server in your AV. Its likely the AV closing the required websockets that were recently implemented causing CPU stats to not display. Quote Link to comment
jakami99 Posted March 27, 2021 Share Posted March 27, 2021 Hey, I know its an old post but I had the same issue while accessing Unraid over my "Nginx Proxy Manager" (Reverse Proxy). You have to enable "Websockets Support" to see your CPU stats while accesing the server external. Hope that helps those who found that post over google Have a good 1 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.