7 hours ago, Stabster said:

does nothing right now. It should run, i've checked my settings several times.

Can you check if any errors in browser console when you press button?

Also post what you can see in syslog when button is pressed?

7 hours ago, Stabster said:

Took me a while to figure out, but this command will run the mover correctly.

You can see it in cli by : "mover --help"

Ohh forgot to mention about it, will fix it for age_mover... :) now should be only "age_mover --help"

7 hours ago, Masterwishx said:

Can you check if any errors in browser console when you press button?

Also post what you can see in syslog when button is pressed?

That's the thing I didn't understand - when I press the button it's like it's not "linked" to anything.
Nothing in syslog, moverlog or anything. It's like the button lacks a command if you understand what i mean.

The consol in firefox did not give out any errors either - the page just reloads, that's it.

1 minute ago, Stabster said:

That's the thing I didn't understand - when I press the button it's like it's not "linked" to anything.

Please check new version

2 minutes ago, Stabster said:

Nothing in syslog, moverlog or anything

Enable Log Mover Tuning plugin actions,Debug Log Mover Tuning plugin actions

Just now, Masterwishx said:

Enable Log Mover Tuning plugin actions,Debug Log Mover Tuning plugin actions

Yes, I am on the new version (2025.12.10).
Both are enabled - still nothing in logs when I click "Move now" - the page just refresh.

Running command works fine and scheduler works fine - just the button that does nothing.
Button: <input type="button" name="StartTuneMover" value="Move now" onclick="startTuneMover(); location.reload()" title="Run Mover Tuning ...">

Edited December 10, 2025Dec 10 by Stabster

14 minutes ago, Stabster said:

Running command works fine and scheduler works fine - just the button that does nothing.

can you clear cache browser ?

7 minutes ago, Masterwishx said:

can you clear cache browser ?

Same results.
As I said though, it's only the button — the scheduler works well, so it's not really an issue for me anymore now that I've found the command.

3 minutes ago, Stabster said:

As I said though, it's only the button — the scheduler works well, so it's not really an issue for me anymore now that I've found the command.

What browser you using?

1 minute ago, Masterwishx said:

What browser you using?

Firefox - 145.0.2 (64-bit)

1 minute ago, Stabster said:

Firefox - 145.0.2 (64-bit)

Yep can reproduce it on firefox, but using Chrome its fine :) , will try to fix it for Firefox ...

2 minutes ago, Masterwishx said:

Yep can reproduce it on firefox, but using Chrome its fine :) , will try to fix it for Firefox ...

That makes sense - Thank you for this!

2 hours ago, Stabster said:

That makes sense - Thank you for this!

Fix will be in new version

Where is the readme for this plugin? Trying to learn how the synchronize files option works. the OP is mega light on details, as is the plugin page in unraid

Just updated to Mover Tuning version 2025.12.10 on Unraid 7.0.1 and the Mover Tuning settings UI looks a little buggy. This is in on a PC Firefox 145.0.2 (64-bit) and I've already tried clearing the browser cache.

Edit: also tried mobile Firefox and Internet browser and it looks the same as above:

Edited December 11, 2025Dec 11 by masymase

1 hour ago, masymase said:

Just updated to Mover Tuning version 2025.12.10 on Unraid 7.0.1

Yep Becouse moved to responsive UI that Unraid 7.2 has. Will try to fix it for older versions...

Hi everyones, i think i have a problem/doubt with the mover.
I have the mover setup for moving file when the cache is more than 65% full, now for some reson i have the cache full at 75% so the mover will run, but the files that are causing this are all inside an ignore.txt file so no file will be move.
So the mover is checking the share but in the end not moving anything.
Even if nothing is being move the Parity Disk and the Disk 1 and Disk 4 are getting spinning up can some one explain to me why? is this intended? and why the disk 2 and 3 are not getting spinned?

I am on Mover 2025.12.10 and Unraid 7.2.2 this was not happening before

Debug_Mover_tuning_2025-12-12T185434.log

Mover_tuning_2025-12-12T184525.log

2 hours ago, Yusseiin said:

Even if nothing is being move the Parity Disk and the Disk 1 and Disk 4 are getting spinning up can some one explain to me why? is this intended? and why the disk 2 and 3 are not getting spinned?

It's depend on files that should be moved, keeped and ignored. Mover tuning checking shares, make lists of files. Then decide what to move based on lists...

So it's depend how shares built, what disks are included for shares etc. If turbo write enabled...

1 hour ago, Masterwishx said:

It's depend on files that should be moved, keeped and ignored. Mover tuning checking shares, make lists of files. Then decide what to move based on lists...

So it's depend how shares built, what disks are included for shares etc. If turbo write enabled...

The shares are pretty simple, Cache -> Array.

In the array i have 4 disk + parity.

This behavior was not happening before thats why i am asking it.

12 hours ago, Yusseiin said:

This behavior was not happening before thats why i am asking it.

Was nothing changed related in privios versions, this can be related to files involved you can check in mover tuning list what files was involved...

where is the github or wiki or readme for this plugin? Trying to learn how the synchronize files option works.

8 hours ago, bobloadmire said:

where is the github or wiki or readme for this plugin? Trying to learn how the synchronize files option works.

You can click on options for help description or press F1

Edited December 14, 2025Dec 14 by Masterwishx

3 hours ago, Masterwishx said:

You can click on options for help description or press F1

uh where would I do this? not seeing this on the plugin page and F1 didn't do anything.

13 minutes ago, bobloadmire said:

uh where would I do this? not seeing this on the plugin page and F1 didn't do anything.

"?" button will expand all help texts in all unraid pages.

Clicking on a setting's text will expand just that one.

Edited December 14, 2025Dec 14 by Kilrah