ibasaw Posted May 1, 2018 Share Posted May 1, 2018 hi, last partiy check result OK, all disk light are green on UNRAID, but on the colum erros i got many on 2 differents disks: disk 4 : 152 errors disk 6 : 52 erros Parity is valid: Last check completed on Tue 01 May 2018 12:59:35 PM EDT (today), finding 0 errors. Duration: 6 hours, 59 minutes, 34 seconds. Average speed: 119.2 MB/sec Is it bad ? may i change those disks ? ++ the-beast-smart-20180501-1637.zip the-beast-smart-20180501-1639.zip the-beast-diagnostics-20180501-1645.zip Quote Link to comment
trurl Posted May 1, 2018 Share Posted May 1, 2018 Diagnostics already includes syslog and SMART from all disks so no need to also post those with diagnostics. Disk4 has 24 reallocated, you should keep an eye on it. Do you have Notifications setup? Lots of this in syslog, not sure what that's about but I would guess it's controller related. May 1 16:36:54 THE-BEAST kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Are these disks on the same controller? Quote Link to comment
John_M Posted May 1, 2018 Share Posted May 1, 2018 See here. It's probably benign and may be related to temperature sensors. SMBus = System Management Bus. Quote Link to comment
trurl Posted May 1, 2018 Share Posted May 1, 2018 2 minutes ago, John_M said: See here. It's probably benign and may be related to temperature sensors. SMBus = System Management Bus. OK maybe unrelated. About those disks 10 minutes ago, trurl said: Are these disks on the same controller? Quote Link to comment
ibasaw Posted May 1, 2018 Author Share Posted May 1, 2018 (edited) yes all are on the same controller : Raid Controller: LSI 9210-8I (IT MODE) Edited May 1, 2018 by ibasaw Quote Link to comment
trurl Posted May 1, 2018 Share Posted May 1, 2018 You will have to reboot if you want to reset the error counts in the webUI. You might check connections, reseat controller, etc. if you want. Make sure you have Notifications setup to alert you by email or some other agent. Quote Link to comment
JorgeB Posted May 2, 2018 Share Posted May 2, 2018 Both errors were disk problems, and they should be replaced, but you have 4 of the infamous ST3000DM001, so all of those should be replaced sooner rather than later. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.