Corsair RMi, HXi, AXi PSU Statistics - CyanLabs's fork

[mayberts]

2 minutes ago, giganode said:

To keep you informed... I actually didn't have the time to update to the new version yet.

 

 

Pls try to run the command "corsairmi" in cli. If it fails, try this command and retry:

chmod +x /usr/local/bin/corsairmi

 

Does it work now?

Thanks for getting back to me. Still not working though

 

 

[giganode]

9 minutes ago, mayberts said:

Thanks for getting back to me. Still not working though

 

 

Ok so it's a different issue.

 

Pls post the output of lsusb -t

 

And also check System Devices and verify your PSU is listed.

 

Thank you!

Edited June 7, 2023 by giganode

[mayberts]

root@Defiant:~# lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
        |__ Port 6: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
        |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 3: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M

 

[mayberts]

20 minutes ago, giganode said:

Ok so it's a different issue.

 

Pls post the output of lsusb -t

 

And also check System Devices and verify your PSU is listed.

 

Thank you!

it does show as a USB device

[giganode]

56 minutes ago, mayberts said:

it does show as a USB device

 

Please post your Diagnostics.

[mayberts]

@giganode here you go.  Thanks for taking the time to have a look at this

defiant-diagnostics-20230607-1518.zip

[giganode]

Please post the output of corsairmi /dev/hidraw0

 

In the meantime I will check the behaviour on my system with HX750i on newest rc.

Edited June 7, 2023 by giganode
Typo

[mayberts]

Just now, giganode said:

Please post the output of corsairmi /dev/hidraw0

 

In the meantime I will check the behaviour on my system with HX850i on newest rc.

root@Defiant:~# corsairmi /dev/hidraw0
unexpected device: 1b1c:1c1e

[giganode]

Okay.

 

I updated to 6.12.0-rc6.13. For me it is working.

 

If you don't mind please update in case the issue is already gone with this release.

[mayberts]

6.12.0-rc6.13 isnt showing as an update for me

[giganode]

57 minutes ago, mayberts said:

6.12.0-rc6.13 isnt showing as an update for me

 

Yes, because rc7 is higher 😅

 

I switched the branch and will apply the update to rc7 soon..

[giganode]

@mayberts I upgraded to rc7.. everything works like before for me.

 

What happens if you remove every hid? Please remove Mouse and Keyboard, then test again.

 

Also try unplugging the PSUs usb cable, then put it back in and try again.

[mayberts]

Sorry this might be a silly question, but how do you remove HID device?

[giganode]

@mayberts try by unplugging the keyboard and mouse please.
Then check function with corsairmi via cli.

If this doesn’t help, try unplugging the PSUs usb cable, plug it back in and then try corsairmi again.

[mayberts]

Right I see.  I don't have any mouse or keyboards connected.  I have unplugged the usb cable and plugged it back in.  I still get `unexpected device: 1b1c:1c1e`

 

I have tried it on a different USB header too. 

[mayberts]

could this be caused by the new HXi using USB type c?

[giganode]

4 hours ago, mayberts said:

could this be caused by the new HXi using USB type c?

 

Ah thats the new generation!

 

I'm afraid, that might be the reason. Let me check something..

[giganode]

4 hours ago, mayberts said:

could this be caused by the new HXi using USB type c?

 

I'm sorry I did not think about that new generation with usb-c connector. This version is actually not supported right now. I will try to add support later that day.

 

For testing purposes I will contact you via pn then  

[mayberts]

27 minutes ago, giganode said:

 

I'm sorry I did not think about that new generation with usb-c connector. This version is actually not supported right now. I will try to add support later that day.

 

For testing purposes I will contact you via pn then  

Thanks, looking forward to it  

[doctortt]

I don't see Corsair RMx is supported. Can someone please confirm? Thanks 

[giganode]

I don't see Corsair RMx is supported. Can someone please confirm? Thanks 

Exactly, RMx series doesn’t have a communication port. So there’s no way to extract the data.

[Hitchcockw01]

Hello,

I'm new and getting my Unraid server set up. I have an HX1000i in my build. I see it in system devices, The plug-in is installed and I selected the HXi in the setting. I see the section on my dashboard but no information populates. Can anyone tell me what I maybe missing? I feel like it's likely something stupid easy that I just over looked.

[mayberts]

Is your PSU the newer version with the type-c connector?

[Hitchcockw01]

Yes, the PSU end has a USB-C connector. Just to add information, it still connects to a USB 2.0 header on the motherboard side. I missed the posts above earlier.

[giganode]

Yes, the PSU end has a USB-C connector. Just to add information, it still connects to a USB 2.0 header on the motherboard side. I missed the posts above earlier.

Okay, so you will need a temporary fix until the changes are released. I will send it to you via pn in a few minutes