January 22, 20206 yr Author 7 hours ago, dwarfer said: These are my usb devices root@Tower:/sys/bus/usb/drivers/usbhid# lsusb Bus 006 Device 003: ID 05e3:0626 Genesys Logic, Inc. USB3.1 Hub Bus 006 Device 002: ID 05e3:0620 Genesys Logic, Inc. USB3.1 Hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 004: ID 413c:2107 Dell Computer Corp. Bus 005 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 005 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 174c:3074 ASMedia Technology Inc. ASM1074 SuperSpeed hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 1b1c:1c11 Corsair USB API Bus 001 Device 002: ID 174c:2074 ASMedia Technology Inc. ASM1074 High-Speed hub Bus 001 Device 008: ID 0b05:18b8 ASUSTek Computer, Inc. Channel AURA MOTHERBOARD Bus 001 Device 007: ID 8087:0025 Intel Corp. Bus 001 Device 006: ID 051d:0003 American Power Conversion UPS Bus 001 Device 005: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is what I have under /sys/bus/usb/drivers root@Tower:/sys/bus/usb/drivers# ls -al total 0 drwxr-xr-x 9 root root 0 Jan 7 13:31 ./ drwxr-xr-x 4 root root 0 Jan 7 13:31 ../ drwxr-xr-x 2 root root 0 Jan 7 13:31 btusb/ drwxr-xr-x 2 root root 0 Jan 7 13:31 hub/ drwxr-xr-x 2 root root 0 Jan 7 13:31 synaptics_usb/ drwxr-xr-x 2 root root 0 Jan 7 13:31 usb/ drwxr-xr-x 2 root root 0 Jan 7 13:31 usb-storage/ drwxr-xr-x 2 root root 0 Jan 7 13:31 usbfs/ drwxr-xr-x 2 root root 0 Jan 7 13:31 usbhid/ root@Tower:/sys/bus/usb/drivers# cd btusb root@Tower:/sys/bus/usb/drivers/btusb# ls -al total 0 drwxr-xr-x 2 root root 0 Jan 7 13:31 ./ drwxr-xr-x 9 root root 0 Jan 7 13:31 ../ lrwxrwxrwx 1 root root 0 Jan 22 12:01 1-13:1.0 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/ lrwxrwxrwx 1 root root 0 Jan 22 12:01 1-13:1.1 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/ --w------- 1 root root 4096 Jan 22 12:01 bind lrwxrwxrwx 1 root root 0 Jan 22 12:01 module -> ../../../../module/btusb/ -rw-r--r-- 1 root root 4096 Jan 22 12:01 new_id -rw-r--r-- 1 root root 4096 Jan 22 12:01 remove_id --w------- 1 root root 4096 Jan 7 13:31 uevent --w------- 1 root root 4096 Jan 22 12:01 unbind root@Tower:/sys/bus/usb/drivers/btusb# cd ../hub root@Tower:/sys/bus/usb/drivers/hub# ls -al total 0 drwxr-xr-x 2 root root 0 Jan 7 13:31 ./ drwxr-xr-x 9 root root 0 Jan 7 13:31 ../ lrwxrwxrwx 1 root root 0 Jan 7 13:47 1-0:1.0 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-0:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 1-6:1.0 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 2-0:1.0 -> ../../../../devices/pci0000:00/0000:00:14.0/usb2/2-0:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 2-6:1.0 -> ../../../../devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 3-0:1.0 -> ../../../../devices/pci0000:00/0000:00:1c.0/0000:03:00.0/usb3/3-0:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 4-0:1.0 -> ../../../../devices/pci0000:00/0000:00:1c.0/0000:03:00.0/usb4/4-0:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 5-0:1.0 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb5/5-0:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 5-2.1:1.0 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb5/5-2/5-2.1/5-2.1:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 5-2:1.0 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb5/5-2/5-2:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 6-0:1.0 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb6/6-0:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 6-2.2:1.0 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb6/6-2/6-2.2/6-2.2:1.0/ lrwxrwxrwx 1 root root 0 Jan 7 13:47 6-2:1.0 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb6/6-2/6-2:1.0/ --w------- 1 root root 4096 Jan 7 13:47 bind lrwxrwxrwx 1 root root 0 Jan 7 13:47 module -> ../../../../module/usbcore/ -rw-r--r-- 1 root root 4096 Jan 7 13:47 new_id -rw-r--r-- 1 root root 4096 Jan 7 13:47 remove_id --w------- 1 root root 4096 Jan 7 13:31 uevent --w------- 1 root root 4096 Jan 7 13:47 unbind root@Tower:/sys/bus/usb/drivers/hub# cd ../synaptics_usb/ root@Tower:/sys/bus/usb/drivers/synaptics_usb# ls -al total 0 drwxr-xr-x 2 root root 0 Jan 7 13:31 ./ drwxr-xr-x 9 root root 0 Jan 7 13:31 ../ --w------- 1 root root 4096 Jan 22 09:44 bind -rw-r--r-- 1 root root 4096 Jan 22 09:44 new_id -rw-r--r-- 1 root root 4096 Jan 22 09:44 remove_id --w------- 1 root root 4096 Jan 7 13:31 uevent --w------- 1 root root 4096 Jan 22 09:44 unbind root@Tower:/sys/bus/usb/drivers/synaptics_usb# cd ../usb root@Tower:/sys/bus/usb/drivers/usb# ls -al total 0 drwxr-xr-x 2 root root 0 Jan 7 13:31 ./ drwxr-xr-x 9 root root 0 Jan 7 13:31 ../ lrwxrwxrwx 1 root root 0 Jan 22 09:37 1-11 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-11/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 1-12 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-12/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 1-13 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-13/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 1-14 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-14/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 1-6 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-6/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 1-7 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-7/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 2-6 -> ../../../../devices/pci0000:00/0000:00:14.0/usb2/2-6/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 5-2 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb5/5-2/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 5-2.1 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb5/5-2/5-2.1/ lrwxrwxrwx 1 root root 0 Jan 22 12:02 5-2.1.3 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb5/5-2/5-2.1/5-2.1.3/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 6-2 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb6/6-2/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 6-2.2 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb6/6-2/6-2.2/ --w------- 1 root root 4096 Jan 22 09:37 bind --w------- 1 root root 4096 Jan 7 13:31 uevent --w------- 1 root root 4096 Jan 22 09:37 unbind lrwxrwxrwx 1 root root 0 Jan 22 09:37 usb1 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 usb2 -> ../../../../devices/pci0000:00/0000:00:14.0/usb2/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 usb3 -> ../../../../devices/pci0000:00/0000:00:1c.0/0000:03:00.0/usb3/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 usb4 -> ../../../../devices/pci0000:00/0000:00:1c.0/0000:03:00.0/usb4/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 usb5 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb5/ lrwxrwxrwx 1 root root 0 Jan 22 09:37 usb6 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb6/ root@Tower:/sys/bus/usb/drivers/usb# cd ../usb-storage root@Tower:/sys/bus/usb/drivers/usb-storage# ls -al total 0 drwxr-xr-x 2 root root 0 Jan 7 13:31 ./ drwxr-xr-x 9 root root 0 Jan 7 13:31 ../ lrwxrwxrwx 1 root root 0 Jan 22 12:02 1-11:1.0 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/ --w------- 1 root root 4096 Jan 22 12:02 bind lrwxrwxrwx 1 root root 0 Jan 22 12:02 module -> ../../../../module/usb_storage/ -rw-r--r-- 1 root root 4096 Jan 22 12:02 new_id -rw-r--r-- 1 root root 4096 Jan 22 12:02 remove_id --w------- 1 root root 4096 Jan 7 13:31 uevent --w------- 1 root root 4096 Jan 22 12:02 unbind root@Tower:/sys/bus/usb/drivers/usb-storage# cd ../usbfs root@Tower:/sys/bus/usb/drivers/usbfs# ls -al total 0 drwxr-xr-x 2 root root 0 Jan 7 13:31 ./ drwxr-xr-x 9 root root 0 Jan 7 13:31 ../ --w------- 1 root root 4096 Jan 22 12:03 bind lrwxrwxrwx 1 root root 0 Jan 22 12:03 module -> ../../../../module/usbcore/ -rw-r--r-- 1 root root 4096 Jan 22 12:03 new_id -rw-r--r-- 1 root root 4096 Jan 22 12:03 remove_id --w------- 1 root root 4096 Jan 7 13:31 uevent --w------- 1 root root 4096 Jan 22 12:03 unbind root@Tower:/sys/bus/usb/drivers/usbfs# cd ../usbhid root@Tower:/sys/bus/usb/drivers/usbhid# ls -al total 0 drwxr-xr-x 2 root root 0 Jan 7 13:31 ./ drwxr-xr-x 9 root root 0 Jan 7 13:31 ../ lrwxrwxrwx 1 root root 0 Jan 22 09:44 1-12:1.0 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/ lrwxrwxrwx 1 root root 0 Jan 22 09:44 1-14:1.0 -> ../../../../devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/ lrwxrwxrwx 1 root root 0 Jan 22 12:03 5-2.1.3:1.0 -> ../../../../devices/pci0000:c0/0000:c0:00.0/0000:c1:00.2/usb5/5-2/5-2.1/5-2.1.3/5-2.1.3:1.0/ --w------- 1 root root 4096 Jan 22 09:44 bind lrwxrwxrwx 1 root root 0 Jan 22 09:44 module -> ../../../../module/usbhid/ -rw-r--r-- 1 root root 4096 Jan 22 09:44 new_id -rw-r--r-- 1 root root 4096 Jan 22 09:44 remove_id --w------- 1 root root 4096 Jan 7 13:31 uevent --w------- 1 root root 4096 Jan 22 09:44 unbind root@Tower:/sys/bus/usb/drivers/usbhid# Do you need any more info? Thanks! Unfortunately i don't have one myself to test, please join https://discord.gg/rjb3z87 and hopefully me and @rasmus can figure it out
February 5, 20206 yr Thanks for this brilliant plugin, going to buy a Corsair PSU just for this. Did you get the AX1600i to work with @dwarfer?
February 5, 20206 yr 6 hours ago, Melo said: Thanks for this brilliant plugin, going to buy a Corsair PSU just for this. Did you get the AX1600i to work with @dwarfer? Unfortunately the AX1600i uses another type of communication that the plugin does not support. Seems that Corsair like to change things with different PSU models.
February 8, 20206 yr Just an FYI, CA's application feed is getting stricter on plugins. The template for CA for this plugin references one URL which does not match the URL referenced within the plugin itself. This is a security issue because if / when the plugin updates, effectively a different plugin winds up getting installed from the one CA has listed (even though in this case they are identical, but due to the differing URLs they effectively are different plugins). Because of this the application feed is automatically blacklisting Corsair PSU until either the template or the plugin are fixed to point to the same URL If the GitHub repository simply changed where the plugin is stored, then the solution is to change the template to that new repository Fma965's Repository https://raw.githubusercontent.com/Fma965/corsairpsu-unraid/master/corsairpsu.plg: Fatal: Plugin URL on xml template does not match PluginURL in .plg (https://raw.githubusercontent.com/Fma965/corsairpsu-unraid/master/corsairpsu.plg vs https://raw.githubusercontent.com/Cyanlabs/corsairpsu-unraid/master/corsairpsu.plg) Edited February 8, 20206 yr by pluginCop
February 9, 20206 yr Author On 2/8/2020 at 2:45 PM, pluginCop said: Just an FYI, CA's application feed is getting stricter on plugins. The template for CA for this plugin references one URL which does not match the URL referenced within the plugin itself. This is a security issue because if / when the plugin updates, effectively a different plugin winds up getting installed from the one CA has listed (even though in this case they are identical, but due to the differing URLs they effectively are different plugins). Because of this the application feed is automatically blacklisting Corsair PSU until either the template or the plugin are fixed to point to the same URL If the GitHub repository simply changed where the plugin is stored, then the solution is to change the template to that new repository Fma965's Repository https://raw.githubusercontent.com/Fma965/corsairpsu-unraid/master/corsairpsu.plg: Fatal: Plugin URL on xml template does not match PluginURL in .plg (https://raw.githubusercontent.com/Fma965/corsairpsu-unraid/master/corsairpsu.plg vs https://raw.githubusercontent.com/Cyanlabs/corsairpsu-unraid/master/corsairpsu.plg) fixed i think.
February 13, 20206 yr Hi. Is there any possibility to send data from this plugin directly to the "Grafana" desktop or via "telegraph" or "Influxdb"? It would be great. Regards Janusz
February 15, 20206 yr This is a super cool idea! I am unable to get output for my AX1500i. I'm happy to help test and would appreciate some support. This is the USB Bus 001 Device 005:ID 1b1c:1c02 Corsair Corsair Link TM USB Dongle Unplugging and replugging hot = kernel: usb 1-13: USB disconnect, device number 5 kernel: usb 1-13: new full-speed USB device number 8 using xhci_hcd Now it is listed as: USB Devices Bus 001 Device 001:ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002:ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS Bus 001 Device 003:ID 0781:5583 SanDisk Corp. Ultra Fit Bus 001 Device 007:ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 008:ID 1b1c:1c02 Corsair Corsair Link TM USB Dongle Bus 002 Device 001:ID 1d6b:0003 Linux Foundation 3.0 root hub Edited February 16, 20206 yr by NOLA_DireWolff
February 22, 20206 yr On 1/1/2020 at 11:58 AM, LintHart said: All peachy on my end many, many thanks How do I get these graphs?
February 22, 20206 yr 26 minutes ago, dheg said: How do I get these graphs? See the Lovelace code a couple of posts after the image on the first page
February 22, 20206 yr See the Lovelace code a couple of posts after the image on the first page Thanks! And now, what do I do with that code [emoji3526]? Sent from my SM-G973F using Tapatalk
February 22, 20206 yr 34 minutes ago, dheg said: Thanks! And now, what do I do with that code ? Sent from my SM-G973F using Tapatalk Are you a Home Assistant user? Or are you planning to use this data outside the unraid dashboard in any way?
February 23, 20206 yr Are you a Home Assistant user? Or are you planning to use this data outside the unraid dashboard in any way?I didn't know it was for home assistant, it just looked nice.I have an unopened icy994, but don't know yet when I'll have the time to play with it. My objective was to be able to monitor psu usage with gaming vm off/on and display off. Any kind of export would be enough, csv, sheets, anything Sent from my SM-G973F using Tapatalk
February 23, 20206 yr 10 hours ago, dheg said: I didn't know it was for home assistant, it just looked nice. I have an unopened icy994, but don't know yet when I'll have the time to play with it. My objective was to be able to monitor psu usage with gaming vm off/on and display off. Any kind of export would be enough, csv, sheets, anything Sent from my SM-G973F using Tapatalk This plugin exposes the data as raw JSON. If you can find a way to pull that into a database you’ll be all good. Unfortunately nothing I can assist with. Home assistant just happens to be an excellent use case
March 2, 20206 yr On 2/14/2020 at 4:07 AM, januszwoj said: Hi. Is there any possibility to send data from this plugin directly to the "Grafana" desktop or via "telegraph" or "Influxdb"? It would be great. Regards Janusz Thats exactly what i was thinking and was hoping for an answer.
March 2, 20206 yr 7 hours ago, Ahmed said: Thats exactly what i was thinking and was hoping for an answer. Not 100% sure this is going to work properly and im sure there's prob a better way to do this.. i just wrote up a super amazing script to export the data into influxdb #!/usr/bin/env bash #set -x RAW=$(/usr/local/bin/corsairmi) OUTPUT=/mnt/user/appdata/telegraf/corsair-telegraf.csv function simple() { # echo $(echo "$RAW" | grep "$1" | cut -d ':' -f2 | cut -d ' ' -f 2) echo "$RAW" | grep "$1" | tr -s ' ' | cut -d ':' -f 2 | cut -d ' ' -f 2 } function rail() { # echo "$RAW" | grep -A 3 "output ${1}v" | grep "$2" | tr -s ' ' | cut -d ' ' -f 2 echo "$RAW" | grep "$1" | grep "$2" | tr -s ' ' | cut -d ' ' -f 3 } temp_0=$(simple "temp1") temp_1=$(simple "temp2") powered=$(simple "powered") uptime=$(simple "uptime") supply=$(simple "supply volts") total_watts=$(simple "total watts") # 12V Rail volts_12v=$(rail "output0 volts") amps_12v=$(rail "output0 amps") watts_12v=$(rail "output0 watts") # 5V Rail volts_5v=$(rail "output1 volts") amps_5v=$(rail "output1 amps") watts_5v=$(rail "output1 watts") # 3.3V Rail volts_3_3v=$(rail "output2 volts") amps_3_3v=$(rail "output2 amps") watts_3_3v=$(rail "output2 watts") # InfluxDB output echo "power_supply temp_0=\"$temp_0\",temp_1=\"$temp_1\",total_time=\"$powered\",uptime=\"$uptime\",supply_volts=\"$supply\",total_watts=\"$total_watts\",12v_volts=\"$volts_12v\",12v_amps=\"$amps_12v\",12v_watts=\"$watts_12v\",5v_volts=\"$volts_5v\",5v_amps=\"$amps_5v\",5v_watts=\"$watts_5v\",3.3v_volts=\"$volts_3_3v\",3.3v_amps=\"$amps_3_3v\",3.3v_watts=\"$watts_3_3v\"" > $OUTPUT WIth the output file you can import it straight to influxdb with a cron job to run for like every 5min. Here is how i did it manually # curl -i -XPOST 'http://influxdb-ip:8086/write?db=telegraf' --data-binary @/dir/of/corsair-telegraf.csv HTTP/1.1 204 No Content Content-Type: application/json Request-Id: fd24688f-5c64-11ea-93c0-7085c242ccc6 X-Influxdb-Build: OSS X-Influxdb-Version: 1.7.10 X-Request-Id: fd24688f-5c64-11ea-93c0-7085c242ccc6 Date: Mon, 02 Mar 2020 09:05:40 GMT and now i have to figure out how to get grafana to show the results. fun times!! ***ok scratch that. it didnt seem to work...... seems like it wont input the results even though they appear to be clearly showing in the file. Edited March 2, 20206 yr by Ahmed
March 6, 20206 yr On 3/4/2020 at 7:46 PM, NOLA_DireWolff said: Does this work on the axi1500? Second this. Anything we can do to get this going on the 1500i ? It is not working on the the 1500i as of 3/7/2020 I am able to connect to it via windows VM and it obviously shows up in my usb devices. Edited March 7, 20206 yr by [email protected]
March 8, 20206 yr On 3/6/2020 at 6:28 AM, [email protected] said: Second this. Anything we can do to get this going on the 1500i ? It is not working on the the 1500i as of 3/7/2020 I am able to connect to it via windows VM and it obviously shows up in my usb devices. I am third !
March 16, 20206 yr Author On 3/5/2020 at 3:46 AM, NOLA_DireWolff said: Does this work on the axi1500? On 3/6/2020 at 6:28 AM, [email protected] said: Second this. Anything we can do to get this going on the 1500i ? It is not working on the the 1500i as of 3/7/2020 I am able to connect to it via windows VM and it obviously shows up in my usb devices. On 3/8/2020 at 12:38 PM, ingux16 said: I am third ! Any one tried this with HWInfo on windows, does that detect it?
March 17, 20206 yr 7 hours ago, Fma965 said: Any one tried this with HWInfo on windows, does that detect it? Here is what SIV64 reads out in windows, basically all the information shows up in windows. Efficiency, output inputs etc... siv64 link
March 17, 20206 yr Author 13 hours ago, [email protected] said: Here is what SIV64 reads out in windows, basically all the information shows up in windows. Efficiency, output inputs etc... siv64 link Yes i already know SIV works but thanks
March 18, 20206 yr 8 hours ago, Fma965 said: Yes i already know SIV works but thanks HWINFO also works. See below. Edited March 18, 20206 yr by [email protected]
March 19, 20206 yr Author On 3/18/2020 at 2:38 AM, [email protected] said: HWINFO also works. See below. yes but is this communicating via the corsair icue/link sdk? turn off SDK support in Corsair iCUE and restart HWinfo.
March 22, 20206 yr On 3/19/2020 at 1:12 PM, Fma965 said: yes but is this communicating via the corsair icue/link sdk? turn off SDK support in Corsair iCUE and restart HWinfo. This is on naked Windows installation, It does not have LINK or ICUE installed. The only other thing installed on here is SIV
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.