January 13, 20206 yr For past couple months I have been being deluged twice a day with 10 (was 4 for a while, now back up to 10) push notifications that disks are over the threshold e.g., Subject: Warning [TOWER] - Disk 10 is high on usage (76%). (See pic). It was harmless if not annoying so I hadn't done anything other than tweak notification thresholds (no effect). Yesterday I was troubleshooting an ECC error in the logs (fixed by replacing OS USB stick... who'da thunk?) and decided to try and fix this as well. No luck so far so I'm back here to see if anyone has run across this too. I have thresholds set at 90% for warning, 95% for critical. I shouldn't be getting any notifications but for some reason it is sending them. Last night I tried resetting to default as many global disk settings as I could (see pic) Diagnostics attached but I don't see anything in there that looks suspicious. tower-diagnostics-20200113-1122.zip Edited January 13, 20206 yr by interwebtech
January 13, 20206 yr Community Expert Have you also checked the individual drives? Any values set at the individual drive level over-ride the global defaults.
January 14, 20206 yr Author 5 hours ago, itimpi said: Have you also checked the individual drives? Any values set at the individual drive level over-ride the global defaults. I have them set at the individual level to 95/97 as well. Is there a way to reset all to default so I can start fresh? Edited January 14, 20206 yr by interwebtech
March 31, 20206 yr Author This is still happening twice a day. The notifications clearly are not obeying the drive settings, either global or per drive.
March 31, 20206 yr Community Expert You should post your system diagnostics zip file to see if anyone can spot a possible reason. As far as I know you are the only person who has reported anything like this so it must be something specific to your system.
March 31, 20206 yr Community Expert Those setting are saved in: flash\config\plugins\dynamix\dynamix.cfg Check yourself what they are set to, don't post that file here as it can contain text passwords, look for warning="XX" and critical="XX"
March 31, 20206 yr Author thanks for taking a look at this. Notifications range from ""high on usage (90%)" to "low on space (92%)". All drives are 8TB. tower-diagnostics-20200331-1103.zip Edited March 31, 20206 yr by interwebtech
June 8, 20206 yr I am having this problem as well. My settings (global and for drive 2): Warning: 75 % Critical: 90 % Disk is sitting at 73 % Notifications are each day at ~6.47 AM and at ~21.42. Almost every day, some days only once. I have checked the dynamix.cfg and it has the same values as the gui. Hopefully someone can figure this one. Thanks.
June 8, 20206 yr 5 minutes ago, jorge16 said: Hopefully someone can figure this one. Re-apply both the global and per disk settings, and check if that makes a difference.
June 8, 20206 yr 2 minutes ago, bonienl said: Re-apply both the global and per disk settings, and check if that makes a difference. Done. Now warning is at 80 % (I figured I bump it a little bit as it was close to the limit) and critical is still at 90 % I will update this post if I receive the notifications or a couple days pass without notifications.
June 8, 20206 yr Author 15 minutes ago, jorge16 said: Done. Now warning is at 80 % (I figured I bump it a little bit as it was close to the limit) and critical is still at 90 % I will update this post if I receive the notifications or a couple days pass without notifications. I've done this several times to no avail. Edited June 8, 20206 yr by interwebtech
June 11, 20206 yr Just wanted to note, I am having this issue as well. None of the suggestions above helped me.
November 22, 20205 yr Interestingly, I'm seeing a warning reported for a disk that's just about at the threshold (70%) but never seeing such warnings for disks which are over their thresholds (all disks set to same defaults).
November 1, 20232 yr Also got this issue for years now. The custom threshold is just ignored... I get notifications at 80% which is ridiculous for 10TB drives. The settings in dynamix.cfg are: warning="96" critical="97" unraid v6.12.4
May 20, 20242 yr Same for me, as well! Running 6.12.10. I've tried using a global "0" and all 18 of my drives get alerts. Ridiculous that this isn't being addressed or at least a bug hasn't been assigned.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.