Daftyler Posted February 16, 2020 Share Posted February 16, 2020 Good Evening, I very recently (as in a few days ago) set up my first Unraid experience, and everything was going fine, until today. I installed Binhex-Preclear for some drives, and the second I installed the docker my page refreshed to what is shown below. I found a few post's on here and tried those solutions and so far have had no success. I tried to boot in safe mode without plugins, same problem. I tried to delete /config/plugins/dynamix/dynamix.plg, however i DO NOT have the dynamix.plg file on the drive. Since this Unraid was just built I have no cache backups or anything yet, so I am hoping someone is able to help, Thanks for your time! Quote Link to comment
Squid Posted February 16, 2020 Share Posted February 16, 2020 From the terminal if you can get at it, diagnostics I suspect though that this has nothing at all to do with preclear (unless you actually ran it and tried to preclear your flash drive), but that the flash drive dropped offline for some reason (USB2 ports are always recommended as they are far more reliable than USB3) 1 Quote Link to comment
Daftyler Posted February 16, 2020 Author Share Posted February 16, 2020 11 minutes ago, Squid said: From the terminal if you can get at it, diagnostics I suspect though that this has nothing at all to do with preclear (unless you actually ran it and tried to preclear your flash drive), but that the flash drive dropped offline for some reason (USB2 ports are always recommended as they are far more reliable than USB3) I have just ran diagnostics and have the unzipped file, what would I be looking for in it? I know the docker seems very unlikely, but I thought Id mention it because it was an odd coincidence. I am using USB3, I dont want to say that isnt the problem, however it is a brand new drive and I am at least skeptical of that at the moment. Quote Link to comment
Squid Posted February 16, 2020 Share Posted February 16, 2020 I dont know. You should post the zip Quote Link to comment
Daftyler Posted February 16, 2020 Author Share Posted February 16, 2020 22 minutes ago, Squid said: I dont know. You should post the zip Absolutely! tower-diagnostics-20200216-1414.zip Quote Link to comment
trurl Posted February 17, 2020 Share Posted February 17, 2020 I don't see any flash issues in those. Another possibility is a browser problem. Clear browser cache and if you have any adblockers whitelist your server. Quote Link to comment
Daftyler Posted February 17, 2020 Author Share Posted February 17, 2020 2 hours ago, trurl said: I don't see any flash issues in those. Another possibility is a browser problem. Clear browser cache and if you have any adblockers whitelist your server. Yea i had done both of those, no difference. Quote Link to comment
Daftyler Posted February 17, 2020 Author Share Posted February 17, 2020 Is it normal to not have a dynamix.plg file? Still cant figure this out:/ Quote Link to comment
bonienl Posted February 17, 2020 Share Posted February 17, 2020 Take the flash device (after shutting down the system) and edit the following files in the folder /config on your USB device docker,cfg DOCKER_ENABLED="no" domain.cfg SERVICE="disabled" This disables both docker and VM, see if this makes a difference. Quote Link to comment
Daftyler Posted February 17, 2020 Author Share Posted February 17, 2020 32 minutes ago, bonienl said: Take the flash device (after shutting down the system) and edit the following files in the folder /config on your USB device docker,cfg DOCKER_ENABLED="no" domain.cfg SERVICE="disabled" This disables both docker and VM, see if this makes a difference. This improved the GUI a small amount, but overall, no change. Quote Link to comment
bonienl Posted February 17, 2020 Share Posted February 17, 2020 2 minutes ago, Daftyler said: This improved the GUI a small amount, but overall, no change. What do you mean? Are there still error message in the screen? dynamix.plg is no longer used and incompatible with latest Unraid versions. There should be no reference to this. Quote Link to comment
Daftyler Posted February 17, 2020 Author Share Posted February 17, 2020 1 minute ago, bonienl said: What do you mean? Are there still error message in the screen? dynamix.plg is no longer used and incompatible with latest Unraid versions. There should be no reference to this. The errors are all still there sorry. Thank you for letting me know about dynamix.plg, it had just come up a few times during my search. Quote Link to comment
Squid Posted February 17, 2020 Share Posted February 17, 2020 Post the file (do not post the contents) /config/plugins/dynamix/dynamix.cfg on the flash drive. Quote Link to comment
Daftyler Posted February 17, 2020 Author Share Posted February 17, 2020 (edited) 17 minutes ago, Squid said: Post the file (do not post the contents) /config/plugins/dynamix/dynamix.cfg on the flash drive. Im sorry, im a little confused about what you are asking? You want to just see the file path without the contents..? Dynamix.cfg containts nothing Edited February 17, 2020 by Daftyler Reword Quote Link to comment
Squid Posted February 17, 2020 Share Posted February 17, 2020 Not the answer I was expecting, but still explains things Deleting that file *should* get you going, but I'd expect that you've also got some corruption on the flash drive somehow. Pull the stick and toss it into another computer and run the file system checks on it, or reformat and recreate it (copy from /config the trial.key file and save somewhere safe) Quote Link to comment
Daftyler Posted February 17, 2020 Author Share Posted February 17, 2020 12 hours ago, bonienl said: Take the flash device (after shutting down the system) and edit the following files in the folder /config on your USB device docker,cfg DOCKER_ENABLED="no" domain.cfg SERVICE="disabled" This disables both docker and VM, see if this makes a difference. in my haste I did not remember when SERVICE was labelled previously, was is 'enabled' or 'enable' 3 hours ago, Squid said: Not the answer I was expecting, but still explains things Deleting that file *should* get you going, but I'd expect that you've also got some corruption on the flash drive somehow. Pull the stick and toss it into another computer and run the file system checks on it, or reformat and recreate it (copy from /config the trial.key file and save somewhere safe) Thank you! Think seems to have fixed the problem. Part of me thought that this was the issue but I was unsure if deleting this would cause any problems. I will backup everything and migrate to USB 2, as clearly this suggestion has merit. Thank you again for your time. Quote Link to comment
trurl Posted February 17, 2020 Share Posted February 17, 2020 2 hours ago, Daftyler said: in my haste I did not remember when SERVICE was labelled previously, was is 'enabled' or 'enable' If the webUI is working again, no need to know, since the recommended way to affect this setting is not by editing the file, but by going to Settings - VM Manager. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.