On 5/21/2026 at 7:47 AM, wtam63 said:

I’m having trouble getting my NVIDIA GeForce RTX 5060 Ti (GB206, Blackwell) working with the Nvidia Driver plugin on Unraid.

Do you have Diagnostics?

22 hours ago, ich777 said:

Please read the first post (big red text):

May 18 21:24:42 Gandalf emhttpd: /usr/local/emhttp/plugins/user.scripts/backgroundScript.sh "/tmp/user.scripts/tmpScripts/unlock nvidia/script" >/dev/null 2>&1

ich777, I don't see any big red text above.... not sure what you mean?

20 minutes ago, marlinz357 said:

ich777, I don't see any big red text above.... not sure what you mean?

I'm also not sure where you where looking:

I updated the nvidia-driver plugin, and the new driver v580.159.03 is not working fine in my M2000, I checked the last verison what I use without problems in my backup and I used nvidia-580.126.18-6.12.54-Unraid-1.

How I can continue using the old version version?

Thanks so much.

On 5/23/2026 at 4:24 PM, ich777 said:

I'm also not sure where you where looking:

Thank you, however this is exactly what I have had for over two years now and it has worked great, but since the moment I updated unraid from 7.2.4 directly to 7.3.0 it stopped working..

10 hours ago, milfer322 said:

Thanks so much.

Diagnostics please.

5 hours ago, marlinz357 said:

Thank you, however this is exactly what I have had for over two years now and it has worked great, but since the moment I updated unraid from 7.2.4 directly to 7.3.0 it stopped working..

Don't know what you are saying, please remove your unlock scirpt, until then no further support.

On 5/26/2026 at 2:47 AM, ich777 said:

Don't know what you are saying, please remove your unlock scirpt, until then no further support.

What I was saying is that I have followed all the instructions in your original post for two years without any issue until updating to 7.3, then the issue immediately started (which means I am now not able to have anything in extra parameters box or the plex app won't start). Additionally, I had to figure out what an unlock script even is and have deleted it. Not sure why that matters but I am not that tech savvy with computers, and had a friend help me. So what can I do now to have my GPU transcode once again since I lost that ability with the Unraid 7.3 update?

getting following after updating to 7.3.1 today, okex will no longer load

any ideas?>

thanks

Myk

+==============================================================================
| WARNING - WARNING - WARNING - WARNING - WARNING - WARNING - WARNING - WARNING
|
| Don't close this window with the red 'X' in the top right corner until the 'DONE' button is displayed!
|
| WARNING - WARNING - WARNING - WARNING - WARNING - WARNING - WARNING - WARNING
+==============================================================================

----------------Downloading Nvidia Driver Package v580.159.04-----------------
---------This could take some time, please don't close this window!------------

---------------Can't download Nvidia Driver Package v580.159.04----------------

Nvidia Info:

Nvidia Driver Version: 610.43.02

Open Source Kernel Module: No

Installed GPU(s):
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

GPU Driver Support:

84:00.0: VGA compatible controller [0300]: NVIDIA Corporation GP107GL [Quadro P400]
Detected via: lspci
Chip codename: GP107GL
Architecture: Pascal
Kernel module support: proprietary-only
Device ID input: 10de:1cb3
Normalized ID: 1cb3
Supported candidates: 580.159.04
Recommended Driver: 580.159.04 (best-available)

GPU-based driver filtering is enabled.

Deprecated: trim(): Passing null to parameter #1 ($string) of type string is deprecated in/usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout/evalContent.php(34) : eval()'d codeon line326

Deprecated: trim(): Passing null to parameter #1 ($string) of type string is deprecated in/usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout/evalContent.php(34) : eval()'d codeon line326

Edited May 29May 29 by MyKroFt

2 hours ago, MyKroFt said:

getting following after updating to 7.3.1 today, okex will no longer load

Please see this recommended post, your plugin is broken when you see the Deprecated lines:

Just a reminder for next time, always include Diagnostics.

On 5/29/2026 at 12:03 AM, ich777 said:

Please see this recommended post, your plugin is broken when you see the Deprecated lines:

Just a reminder for next time, always include Diagnostics.

thank you much, all fixed

Myk

ich777, are you going to help me?

Just now, marlinz357 said:

ich777, are you going to help me?

I don't know what to say.

You have to ask your friend who set this all up, issue with that is that he set something up to circumvent certain restrictions and I can't tell if that's what's all causing that or anything else.

You first have to get rid of that script which I don't know where it lives maybe he set it up as a user script maybe he did something else.

Even if you remove the driver the script will stay because he put it in place and this is nothing the plugin can fix.

5 minutes ago, ich777 said:

I don't know what to say.

You have to ask your friend who set this all up, issue with that is that he set something up to circumvent certain restrictions and I can't tell if that's what's all causing that or anything else.

You first have to get rid of that script which I don't know where it lives maybe he set it up as a user script maybe he did something else.

Even if you remove the driver the script will stay because he put it in place and this is nothing the plugin can fix.

the script was in the "user scripts" plugin, and we found it and deleted it. There just seems to be something with the updated docker that occured with the move to 7.3. Is there any other diagnostics that could help you figure out why I can't transcode with gpu suddenly?

The following is the last line of the "command failed" when trying to input --runtime=nvidia in extra parameters:

docker: Error response from daemon: failed to create task for container: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: error during container init: error jailing process inside rootfs: open /proc/self/mountinfo: no such file or directory

Does this explain anything meaningful to you?

20 minutes ago, marlinz357 said:

The following is the last line of the "command failed" when trying to input --runtime=nvidia in extra parameters:

docker: Error response from daemon: failed to create task for container: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: error during container init: error jailing process inside rootfs: open /proc/self/mountinfo: no such file or directory

Does this explain anything meaningful to you?

Please try to use --gpus all

32 minutes ago, ich777 said:

Please try to use --gpus all

On 5/30/2026 at 2:04 PM, ich777 said:

Please try to use --gpus all

yes, already tried --gpus all, also tried --gpus=all

1 hour ago, marlinz357 said:

yes, already tried --gpus all, also tried --gpus=all

What is the exact error message now, please post your Diagnostics again.

You did reboot after removing the script correct?

14 hours ago, ich777 said:

What is the exact error message now, please post your Diagnostics again.

You did reboot after removing the script correct?

Yes, absolutely, and I upgraded to 7.3.1, which did not help either. Please see the diagnostics as requested:

diagnostics-20260601-1253.zip

2 hours ago, marlinz357 said:

Yes, absolutely, and I upgraded to 7.3.1, which did not help either. Please see the diagnostics as requested:

Please make sure that you BIOS is up to date, that you've enabled Above 4G Decoding (or also called Support Huge Address Table) in your BIOS, also enable Resizable BAR Support and also make sure that you boot with UEFI.

If that also doesn't help try to disable C-States for your CPU.

2 hours ago, marlinz357 said:

Yes, absolutely, and I upgraded to 7.3.1, which did not help either. Please see the diagnostics as requested:

diagnostics-20260601-1253.zip

Something seems wrong with upgrade to 7.3.1 (at least I also have issues after doing so as well. Just haven't had time to get the diagnostic logs submitted). 5070.

Tried uninstalling, rebooting, reinstalling, etc.

tower-diagnostics-20260601-1745.zip

Edited June 1Jun 1 by Mitchel Hayes

On 6/1/2026 at 4:44 PM, Mitchel Hayes said:

Something seems wrong with upgrade to 7.3.1 (at least I also have issues after doing so as well. Just haven't had time to get the diagnostic logs submitted). 5070.

Tried uninstalling, rebooting, reinstalling, etc.

tower-diagnostics-20260601-1745.zip

Figured out needed to select the open source driver and reinstall

I'm having the same issue; the GPU appears to pass through to the Plex container, I can pick the GPU in the transcoding settings, but all the transcoding is CPU bound and the GPU sits idle.

thor-diagnostics-20260604-1923.zip

1 hour ago, chrispy212 said:

I'm having the same issue; the GPU appears to pass through to the Plex container, I can pick the GPU in the transcoding settings, but all the transcoding is CPU bound and the GPU sits idle.

Where did you test the transcoding? Did you test that in the WebPlayer, the WebPlayer is known to have issues when switching quality, have you yet tried it with a native App (Android/iOS).

Please also do keep in mind that if you have burnt in subtitles in the media file that this will use a lot of CPU when playing back the file.

Did you tried it with different media files?

EDIT: I don't see anything wrong in your Diagnostics.

8 hours ago, ich777 said:

Where did you test the transcoding? Did you test that in the WebPlayer, the WebPlayer is known to have issues when switching quality, have you yet tried it with a native App (Android/iOS).

Please also do keep in mind that if you have burnt in subtitles in the media file that this will use a lot of CPU when playing back the file.

Did you tried it with different media files?

EDIT: I don't see anything wrong in your Diagnostics.

I was streaming to my Apple TV. Nothing about my setup changed apart from upgrading unraid, the plugin and drivers.

I’ve since downgraded to 7.0.0 and set the drivers back to the oldest version, but the problem remains.

I’ve been streaming to a variety of clients without issue for years; now it buffers every 10 seconds and my unraid dash shows the GPU is idle and the CPU is pinned at 100%, something is definitely off.

Edited June 5Jun 5 by chrispy212