Marzel

The support was able to help me, my Unraid is now licensed again. Thanks for the quick help. Marcel

Hello everyone I need your help please. I have had my Unraid off for a few months now and have used the disks elsewhere. Now I missed my Unraid too much and I wanted to reactivate it. Since I wanted to start from scratch, I recreated my USB stick (my old USB stick with my Pro license) with the Unraid Creator Tool. Then I started my Unraid and tried to recover the license, unfortunately without success. I always get this error message: Then I thought to myself, no problem, you had previously configured Unraid Connect, log in there and download your key there. Unfortunately that doesn't work either, it just opens an empty tab in the browser and that's it. Ok, I thought, just find an old Flash backup and copy the key file to the stick and that's it. What can I say, I seem to have misplaced or deleted all the backups, I can't find them any more. So off to the forum to see what other options there are, I found this thread. I then looked for my email with the registration link, but unfortunately it didn't get me any further. The Install Key... window only said Downloading and then ERROR:8 Now I'm at the end of my ideas and unfortunately I haven't found anything else in the forum. Can you give me a tip on how to get my license back onto my USB stick? Many thanks in advance for your support.

As there where some owner chip changes for Remotely i now update the Links to the Repo and Docker Hub as well as the template. Every thing should be now update to date int the App Store. About the problem with the First Account, i can just Quate the text from the Repo. I tested it today and it worked for me.

Hello all I am using the "docker.io/library/postgres:14.5-alpine" image and the "dpage/pgadmin4:latest" image. Both images use their own users and so the rights of the created file in the appdata folder are also different from other images. My problem is that these file permissions are gone after each backup and the containers either do not start at all or only with errors. Why are the file permissions changed during backup and how can I disable this? Thanks Marzel

After copying everything back it's now showing 141GB used. So your cp command @JorgeB did shrink the vdisk also, thank you for that. Yes I have reached the 20GB limit. Because of that i extended the docker.img and i have the disk space(1TB) so i thought, i will go with 100GB. But now it only uses 23GB of the 100GB.

That explains it, after a reboot it's now just 3.82MB. I will now move the files and folder back to cache and hope that the disk show the used space correctly.

Even after I emptied the cache drive, 1.7GB are supposedly still occupied. Most of the "700GB" was the appdata folder, which is still 11.5GB in the array. I honestly don't understand what is going on here.

I already started moving the VM to the array, let's see if that makes a differentes. Again Thanks for you help!

Thank you for your answer. If i get that right, it appliers only for Window VMs right? I just have one Ubuntu VM with a 50GB vdisk, so shouldn't be the problem right?

Hello Community I logged into my Unraid this morning and found that my cache drive is 71% full. When I tried to find out what data is on the disk, I only found 174GB. However, the SSD is 1TB large and there are 706GB occupied displayed. Does anyone have a tip or an idea what could be going on? Thanks already for your help! Marzel heimdall-diagnostics-20220921-0814.zip

Hello together I updated my Unraid to 6.10.0-rc2 yesterday and so far everything looks good, only after the update my Prometheus and Grafana container did not start anymore. After some searching I found a solution for Prometheus and everything works again. Unfortunately I haven't found a solution for Grafana yet. Error message from the log: logger=sqlstore t=2022-02-03T09:50:10.37+0100 lvl=info msg="Connecting to DB" dbtype=sqlite3 logger=migrator t=2022-02-03T09:50:10.38+0100 lvl=eror msg="failed to determine the status of alerting engine. Enable either legacy or unified alerting explicitly and try again" err="failed to verify if the 'alert' table exists: unable to open database file: permission denied" Does anyone have an idea or tip what this could be? Thanks

Hi i fixed it by changing the rights of the data folder in /appdata/prometheus chown -R 65534:65534 data Maybe that helps you guys also.

Yes i have CA Backup installed, but i run it weekly. I know what you mean but my PiHole is not a docker on the Unraid. Since I created the post, the exporter runs through, I will continue to monitor this. Thanks anyway for the help.

Hi, my Pi-Hole Exporter is stopping every day. Is there any log file where i can take a look to get more infos what is stopping it? Thanks Marzel

I'm using NPM and it works for me. Do you get any Errors? Where are you stuck?

Hi all, I have just updated my Remotly container. The update went through without any problems and my settings were not reset either. Files that are important: appsettings.json The server will use this new file for reading/writing its settings, and it won't be overwritten by future upgrades. Remotely.db By default, SQLite is used for the database. The "Remotely.db" database file is automatically created in the root folder of your site. Both files are now located in appdata/remotly by default. More info about the update can be found at Github.

new Update 6min ago is working fine for me

Interesting, I also use cloudflare and have had no problems so far. I use NginxProxyManager though, maybe that's why? I have never tried SWAG.

Remotely Docker Support Thread Application Name: Remotely Docker Hub: https://hub.docker.com/r/immybot/remotely Github: https://github.com/immense/Remotely Application Description: If you have any problems or questions, send me a message or write a post in this support thread. This is my first support thread, so if I have missed anything, please let me know. EDIT: I have updated the links and the template. Also have a look at the repository, there are some explanations, among others how to create the first user.

i'm not a expert put i don't think that some of this would fix my problem. Anyways thank for posting. i tried a different redirect but that redirected to many. But that did the trick and fixed it also for me. Thank you.

ok, than i need to find out how the "Custom Nginx Configuration" in Nginx Proxy Manager work. Haven't had to use it yet.

Hi everyone First of all, thank you to @knex666 for that Docker Template, for me it works really good. But I have two things that I would like to comment/ask. When i open the Overview Page in the Settings i get this: For the caldav and carddav i could fix it by editing the .htaccess file in the Nextcloud folder. RewriteRule ^\.well-known/carddav https://sub.domain.tld/remote.php/dav/ [R=301,L] RewriteRule ^\.well-known/caldav https://sub.domain.tld/remote.php/dav/ [R=301,L] If I understand correctly, this will only remain until the next update is installed or? Is there another way to fix that permanently? For the php-imagick i didn't find a fix by now, any tips for that? Many thanks Marzel

Hi cholzer, i can not reproduce your case but what i noticed on my system with 6.9.0 RC2 is that my disks are not spinning down any more. How did you set your spin down? For every disk or in the disk settings for all? Thanks Marzel

I have the same like you, no fan sensor in the Dynamix System Temp. And i have no PWM Contoller in the Dynamix Auto Fan. Dose some one have a hint for me how to get it working? I also added a screenshot of my Mainboard and CPU. Thanks Marzel

I had the same problem today. After I had set -i br0 everything was ok again. Will continue to monitor. Thanks for all the tips