gevsan

Hello. I have installed a new NIC card in my Unraid server. After the installation I couldn't connect to unraid GUI with the networkcable connected to my motherboard. So I tried to connect the networkcable to the new installed NIC-card and it worked. I think i got a error message "cannot find eth0" <- I think that this was the message.. Now. I removed the secondary NIC from the motherboard but I still couldn't connect to unraid GUI throught the motherboard NIC. I had to deactivate VT-x in order to get the unraid gui work again. My question is, how do i connect to my motherboard nic with VT-x enabled and have my secondary NIC set to eth1? The reason I want a secondary NIC is because I want to run my cctv cameras on a separated network. /Emil (Sorry for the spelling and poor word choises) Posted this in wrong forum?

After doing some research, I don't think Radarr and Sonarr is redownloading anything tbh... I think that after the transcoding is done the movie is put back into the cache for the array. My setup is like this, Radarr/Sonarr -> cache_array ->(mover)-> /data/media -> Tdarr -> cache_array ->(mover)-> /data/media The reason I thought it was being re-downloaded is because i found the movie/tvshow files on the cache_array drive once they were finished in Tdarr. Which is strange for me because the only files that are put there is from QBtorrent. I hope that any of this makes sense...

New question.. After a movie or tv-show is done transcoding with Tdarr. Radarr is downloading the same movie/tv-show again, making this a endless loop? How do I prevent this? Im transcoding to h.265

Hello. I have a problem with Tdarr.. Suddenly it's only transcoding using the CPU. I'm using a GTX 1660 Super In the docker template i have: Extra Parameters: --runtime=nvidia NVIDIA_VISIBLE_DEVICES: correct ID NVIDIA_DRIVER_CAPABILITIES: all I am using the docker with node included. In Tdarr -> Plugin Stack: I have enabled 1. Migz-Remove image formats from file 2. Migz-Transcode Using Nvidia GPU & FFMPEG container: mkv bitrate_cutoff: empty enable_10bit: false enable_bframes: false force_conform: false 3. Tdarr_Plugin_Img1_Reorider_Streams 4. New file size check Updating the graphic drivers seems to fix it for me..

Same here. Suddenly it's only transcoding using the CPU. Is there a fix for this?

How do I upgrade?

Hello. Just a quick question.. Does unraid work with Alder Lake? Im currently on 6.9.2 and im planning to upgrade to a i5 12600k. I will not use Plex or any transcoding atm. Just for some game servers.

Hello. Today I got a warning on my Docker_Cache ssd disk. I want to change this ssd disk and It's currently in xfs mode. I bought 2 nvme disks that I want to use in btrfs insead for this Docker_Cache pool. Do I just add the 2 nvme disks to the Docker_Cache pool and then change the file type to btrfs? Will this format the drives? I do have backups of my appdata folder. Do i simply move the appdata folder into the pool after the change to btrfs? Maybe there is a easy guide for this? I just want this to be a painless operation Best Regards/ Emil

Thanks! This was the explanation that I was looking for. Do I need to do the port magic according to the recommended post for both containers or only the second one? Thanks!

I did read the recommended post. I just don't understand how that will help me...

Thanks for the answer. I did look at it but I don't understand what you mean in the post. From what i see is that I should delete the "port-mapping" at the top and then create new ports. But how will this help me create another server? I still want to use port 2457 for the that i currently have Let's say I want to make another server with port 2466 Do I just type in 2466-2468 in the "UDP Game Ports:"? Won't this affect the server with port 2457? Best Regards/ Emil

Hello ich777. I am super greatful for your hard work for the gameservers! Thank you very much! I have a question and I was trying to find it in this forum but didn't really find a usefull answere. My question is about Valheim. Is it possible to create and run 2 vallheim servers at the same time? Currently I have one vallheim server running without problems. Best Regards/ Emil

Thanks for the reply. I typed wrong my docker.img size is only 20G, I got one zero too much.. My domains share is already on Cache: prefer. my system share is on Cache: prefer it's only the appdata share that is on cache: yes. Now if I change appdata share to cache: prefer and start the mover, is everyting gonna be fine? Do I have to reinstall all dockers? I realy don't want to reinstall the dockers.. BR// Emil

What will happen if i choose Cache: Prefer in this scenario. Will i mess upp the shares? What i mean is, all the "disk1" lokations will be deleted or moved onto the cache? For those folders were it's both "cache_doc" and "disk1" what will happen? Will the mover move all folders/files into the cache from the array? BR/ Emil

Thanks for your replys. Disk1 in my array is allways spinning and is never on standby. I think that this is due to the multiple game servers I'm running and I think that the game servers is writing to Disk1 constantly. I want the mover to move files one time a day to the array but right now it's writing data all the time. I have set the mover to run 7pm each day.

Hello. New here and my first topic. Yes, I could have searched the forum for this but concidering that im brand new I might have more questions then what another topic can answere. So I have a question about my shares. I have set a cache pool and named it "Cache_doc" (docker container). My appdata share is set to cache YES : cache_doc Now my real question Why does some of the folders in the picture use "disk1" as storage? I want all of the folders to be on my "cache_doc" disk. My vdisk size for docker is 200gb Best Regards/ Emil

I would love this! Please make this happen!