tola5

ErrorWarningSystemArrayLogin -smp 8,sockets=1,dies=1,cores=4,threads=2 \ -uuid 83276235-a977-cc5c-e91d-bdeca9b4956c \ -display none \ -no-user-config \ -nodefaults \ -chardev socket,id=charmonitor,fd=32,server=on,wait=off \ -mon chardev=charmonitor,id=monitor,mode=control \ -rtc base=localtime \ -no-hpet \ -no-shutdown \ -boot strict=on \ -device pcie-root-port,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x1 \ -device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \ -device pcie-root-port,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x2 \ -device pcie-root-port,port=0xb,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x3 \ -device pcie-root-port,port=0xc,chassis=5,id=pci.5,bus=pcie.0,addr=0x1.0x4 \ -device pcie-root-port,port=0xd,chassis=6,id=pci.6,bus=pcie.0,addr=0x1.0x5 \ -device pcie-root-port,port=0xe,chassis=7,id=pci.7,bus=pcie.0,addr=0x1.0x6 \ -device pcie-root-port,port=0xf,chassis=8,id=pci.8,bus=pcie.0,addr=0x1.0x7 \ -device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x7.0x7 \ -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x7 \ -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x7.0x1 \ -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x7.0x2 \ -device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x0 \ -netdev tap,fd=34,id=hostnet0 \ -device virtio-net,netdev=hostnet0,id=net0,mac=52:54:00:fb:15:f6,bus=pci.1,addr=0x0 \ -chardev pty,id=charserial0 \ -device isa-serial,chardev=charserial0,id=serial0 \ -chardev socket,id=charchannel0,fd=35,server=on,wait=off \ -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \ -audiodev id=audio1,driver=none \ -device vfio-pci,host=0000:0b:00.0,id=hostdev0,bus=pci.3,multifunction=on,addr=0x0,romfile=/mnt/user/Pg/GF110.rom \ -device vfio-pci,host=0000:0b:00.1,id=hostdev1,bus=pci.4,addr=0x0.0x1 \ -device vfio-pci,host=0000:01:00.0,id=hostdev2,bus=pci.5,addr=0x0 \ -device vfio-pci,host=0000:06:00.0,id=hostdev3,bus=pci.6,addr=0x0 \ -device usb-host,hostdevice=/dev/bus/usb/007/004,id=hostdev4,bus=usb.0,port=1 \ -device usb-host,hostdevice=/dev/bus/usb/007/002,id=hostdev5,bus=usb.0,port=2 \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on char device redirected to /dev/pts/0 (label charserial0) When it boot

Hi I got a GTX 580 in my unraid server . know it crazy old, but the prices are crazy so got this . are trying too get it too pass through the gpu use it own vbios and all can put some pic up later if it are are boot in too windows now just from a ssd . But the question are , 1 Are there any technical reason it should not work for it old 2 have any one use one and like too share there setup there boot vm with thx Tola5

But when the disk use a backplate with 4 disk it sound wird it not all 4 or do I miss something

Have add a diagnostics after a reboot disk say the same

Hi have a disk there show too be disabled by the arry what the best way too say all good . If I unmound it and mound it I need too do a fuld sync wish I don't like. So what the way too do that right if you KNOW it ok tower-diagnostics-20210918-0957.zip

Thx have try unplug and change location. I have end up order a expander card too use instead with my other controller

Can it just despair like that Sendt fra min SM-G998B med Tapatalk

Hi sorry for that . And the bios also can't one will think it was the cables then but wird if all don't work the same time tower-diagnostics-20210807-1549.zip

Hi after changing a cable so I could use all my slut in LSI 9201-16e Will my unraid not see any HDD . No matter the cable and what off the sas plate I connected it too . Also the sas plate work out any problem in a other controller. So fell I have try what I can think off .. can see in syslog it give a error But not sure what it mean Try too add the part Sorry it look wird hope the syslog help more but it spicel the mpt2sas thing I was wondering what will say it the driver as I understand ? Edit the time code on the syslog and the post info is different update the post today Tower kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 4 23:03:53 Tower kernel: sdc: sdc1 Aug 4 23:03:53 Tower kernel: sd 4:0:0:0: [sdc] Attached SCSI disk Aug 4 23:03:53 Tower kernel: ata5: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata6: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata7: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata8: failed to resume link (SControl 0) Aug 4 23:03:53 Tower kernel: ata8: SATA link down (SStatus 0 SControl 0) Aug 4 23:03:53 Tower kernel: BTRFS: device fsid 3a0fe81f-ee26-4611-91b0-f8133532d249 devid 1 transid 152680 /dev/sdb1 scanned by udevd (1756) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: sending diag reset !! Aug 4 23:03:53 Tower kernel: random: crng init done Aug 4 23:03:53 Tower kernel: random: 7 urandom warning(s) missed due to ratelimiting Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: diag reset: SUCCESS Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: _base_spin_on_doorbell_int: failed due to timeout count(10000), int_status(c0000000)! Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: doorbell handshake int failed (line=5934) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: _base_get_ioc_facts: handshake failed (r=-14) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:11045/_scsih_probe()! Aug 4 23:03:54 Tower kernel: EDAC amd64: F17h detected (node 0). Aug 4 23:03:54 Tower kernel: EDAC amd64: Node 0: DRAM ECC disabled. Aug 4 23:03:54 Tower kernel: EDAC amd64: tower-syslog-20210804-2300.zip

yea test speed and it shold be ok it work now some time but fell more bad TorGuard vs PIA as I use before sadly there some problem with it at the moment. any way thx

368 DHT notes And for peers no on the list it show 0 (number) And tracker some work other don't. It start too upload now but really bad only like 150kb can be unlucky but nomaly it a few MB sek

WireGuard do you change some settings ? it first time I try qbittorrent can I get you too take a pic off you settings perhaps ?

other there have problem with upload ether really not work or only upload few bite and stop ?

oh ok it explane thx for the help any way

Thx fond it, weirdly enough it just say No Matching Applications Found. Are it for I was need too make a fress install of unraid on my USB ?

Hi have a question I try too restor my appdata but cant find " CA's Previous Apps section" just me there don't know where too look ?

Really great work as always. I got it working just 2 question 1 I can go nextcloud.XXXX.XX and it work if I try too open it the docker or use the local ip it also go there when I look on the traffic in pfsense with ntopng it look like all data go out and ind = use my internet speed can I do so for the local it don't go that way around. 2 are there a way so you can use www. before just people often think that

ok now I got this one plug it in my usb controller card it bib but cant really get it too work anyone there have any barcode scanner work ? https://www.ebay.co.uk/itm/323600450132 edit stupid me forget it perhaps will be smart too attach it too the VM too get it too work

thx

thx just order one are it just plug and start use in the docker ?

nice have looking for something like that a long time, are it possible too use a barcode scaner with the docker ?

Hi know you have not made H265ize but do any know a way too update the H265 version it a old one in use

Hi have long time think I will give it a try so order a 4 port nic ... just ofcores forgot I don't have any more free pcie so in the video you talk abut if you only have one nic I try google but I do not even get a ip . I have a other pc I can try it with but will love not too and keep all in my unraid and just with Vlan . if it work and I have not misunderstand my setup are ISP modem router bridge mode to my netgear r7800 ( it can run Vlan) > ether a cheep switch or direct in the unraid box

Hi just like too be sure if I like too setup Socks5 https://nordvpn.com/da/tutorials/socks5/ are it just put the option in there say port 1080 do I need to change some of the port on the docker for that don't know what the all are for . It for with out Nordvpn give problem with upload

Thx for the good explanation of it and for you great work