OriginalFlavor

root@Tower:~# cat /etc/resolv.conf # Generated by rc.inet1 nameserver 208.67.222.222 # eth0:v4 nameserver 208.67.220.220 # eth0:v4 root@Tower:~# ip route default via 192.168.1.254 dev br0 metric 4 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown 172.18.0.0/16 dev br-af6a406d9e6b proto kernel scope link src 172.18.0.1 linkdown 192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.238 metric 1 root@Tower:~# ping -c 3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) 56(84) bytes of data. 64 bytes from 192.168.1.254: icmp_seq=1 ttl=64 time=0.825 ms 64 bytes from 192.168.1.254: icmp_seq=2 ttl=64 time=0.352 ms 64 bytes from 192.168.1.254: icmp_seq=3 ttl=64 time=0.793 ms --- 192.168.1.254 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2079ms rtt min/avg/max/mdev = 0.352/0.656/0.825/0.215 ms root@Tower:~# ping -c 3 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2071ms root@Tower:~# ping -c 3 208.67.222.222 PING 208.67.222.222 (208.67.222.222) 56(84) bytes of data. --- 208.67.222.222 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2026ms root@Tower:~# nslookup github.com ;; communications error to 208.67.222.222#53: timed out ;; communications error to 208.67.222.222#53: timed out ;; communications error to 208.67.222.222#53: timed out ;; communications error to 208.67.220.220#53: timed out ;; no servers could be reached DNS Servers 208.67.222.222 208.67.220.220 Rebooting. Rebooting fixed everything. (Sorry, I thought I had tried rebooting before making my original post.) Thank you for your help.

Not able to connect remotely via unRaid connect or Tailscale (The plot thickens). Will update this evening when I have local access.

unRAID 7.3.2 Fix common problems is reporting the following issue. Errors Found Suggested Fix Unable to communicate with GitHub.com Reset your modem / router or try again later, or set your to 8.8.8.8 and 8.8.4.4 Also make sure that you have a Gateway address set up (Your Routers IP address). Additionally, this may also mean that GitHub is currently down. This error means that you may not be able to update your OS or plugins More Information Warnings Found Suggested Fix No Warnings found Other Comments Comments Could not check for blacklisted plugins The download of the blacklist failed Could not perform unknown plugins installed checks The download of the application feed failed.tower-diagnostics-20260928-0243.zip

(SOLVED) Unable to communicate with GitHub Errors Found Suggested Fix Unable to communicate with GitHub.com Reset your modem / router or try again later, or set your to 8.8.8.8 and 8.8.4.4 Also make sure that you have a Gateway address set up (Your Routers IP address). Additionally, this may also mean that GitHub is currently down. This error means that you may not be able to update your OS or plugins More Information Warnings Found Suggested Fix No Warnings found Other Comments Comments Could not check for blacklisted plugins The download of the blacklist failed Could not perform unknown plugins installed checks The download of the application feed failed.Diagnostics attached. unRAID 7.3.2 tower-diagnostics-20260928-0243.zip

I could not create the system share even though "system" was not on the list of existing shares. However, after creating appdata, when I turned Docker off in settings and then back on, system share was created automatically. Docker running great. I did need to run "Docker Safe New Perms" to reach data with recreated Docker containers. Thank you for your help.

It is not on any of the drives. I did find an earlier backup from 2024. I had saved the current backup to the same directory. Oh well. I think I figured out my weekend project--recreating Docker containers.

The purpose of the pool was to add more space and be faster than my array. The cache pool is all NVMe SSD drives. The array are spinning HDDs. Is stripe the fastest? I think I am willing to risk redundancy for speed with the cace. That's my reasoning. But I am listening.

Solved!

unRAID ver 7.3.2 Following migration from cache drive "cache" to cache pool "cache_pool" , Fix Common Problems reports... Fix Common Problems reports Warnings Found Suggested Fix Share Boring references non existent pool cache If you have renamed a pool this will have to be adjusted in the share's settings More InformationIn the share settings... Share Settings Share name: Boring Comments: Minimum free space: Free Space will be calculated Share status: Share contains data Exclusive access: No Primary storage (for new files and folders): Cache_pool Secondary storage: None Mover action: Not used Case-insensitive Share name is not uniqueNote that the drop-down boxes in the share settings are greyed out. See image. In the list of my shares, I do see "Boring" (capitalized) but I do not see "boring" I am having Docker issues as well but I posted that in a separate thread. https://forums.unraid.net/topic/200688-appdata-share-deleted-docker-service-failed-to-start-following-migration-to-cache-pool/ Diagnostics attached. tower-diagnostics-20260925-1323.zip

unRAID ver 7.3.2 AppData share is deleted. The Docker tab displays, "Docker Service failed to start" This problem was caused by migration from a cache drive to a cache pool. Before migrating, I backed up my appdata using the plugin. I created a cache pool with 3 cache drives including the original "cache drive". I switched from default (BTRS?) in cache drive to ZFS in cache pool. After restarting array, I watched the appdata.zip backup disappear from the document share. (Maybe the appdata_backup.zip had never been moved from cache to array before moving cache drive into new cache array?) I would like to recover and restore those backed up docker images. I can live with recreating the docker images if the backup is gone. I have no appdata share on my array after the cache mighration. Are there instructions/guidance on restoring / recreating the appdata share? Any suggestions for trying to find and restore the missing appdata_backup.zip file? tower-diagnostics-20260925-1323.zip

I got Glotrends SA20 to work. A NVMe drive needed to be inserted in both slots. Only one slot did not work. See https://forums.unraid.net/topic/200668-solved-glotrends-pa20-pcie-x4-card-using-asm2812-chipset-detected-but-nvme-drive-installed-in-card-not-detected/

I got the Glotrends PA 20 to work. Both slots had to have a NVMe drive inserted, then motherboard and OS recognized the drives. See https://forums.unraid.net/topic/200668-solved-glotrends-pa20-pcie-x4-card-using-asm2812-chipset-detected-but-nvme-drive-installed-in-card-not-detected/

Experiment 1 try one boot with pci=pcie_bus_safe Fresh diagnostics are attached. Did not detect drive. Removed parameter. Rebooted Answers to questionsNVMe info. I have two identical NVMe drives. I do not know the exact make and model. I do know that the NVMe drives use Silicon Motion SM2263XT controllers. I have been using one of the discs ("NVMe_old") as my Cache drive by using the M.2 slot on the motherboard. The other disc is identical make/model/size ("NVME_new"). smps63x86-ab The motherboard x4 slot (PCH SLOT2 PCI-E 3.0 X4) holds the PA20 card. The PA20 has two slots labeled "1" and "2" Experiment 2Powered down Removed PA20 card Removed NVMe_old from M.2 slot Inserted NVMe_new in M.2 slot Rebooted unRAID Found unformated NVME_New Attached diagnostics file. Conclusion. NVME_new is okay. Experiment 3Tried different board. StarTech PEX2M2 NVME_old in card slot 1 NVME_new in card slot 2 motherboard m.2 empty Did not detect drives. attached diagnostics file Experiment 4Motherboard M.2 slot empty NVME_new in PA20 slot 1 NVME_old in PA20 slot 2. It worked. Both drives detected! 🫨 (I am shocked. Would have bet the house that this was going to be a failure.) Any idea why this worked? tower-diagnostics-20260923-2149.zip tower-diagnostics-20260923-2250_Experiment2.zip tower-diagnostics-20260923-2323_experiment3.zip tower-diagnostics-20260924-0002_Experiment4.zip

unRAID does not detect the NVMe drive installed in a new Glotrends PA20 card. unRAID does detect the card, but not the drive. The BIOS sees the card but not the drive. I am starting troubleshooting. (i.e., switching drives, slots, PCIe slots, BIOS settings, contacting MB manufacturer, card manufacturer) My system Supermicro C7H170-M Card: Glotrends PA20 that utilizes ASM2812 chipset. Unraid 7.3.2 Diagnostics attached tower-diagnostics-20260923-1417.zip

Did you ever buy? Did the card work? Or did you choose an alternative that worked? I purchased a Glotrends PA20 that utilizes ASM2812 chipset. My BIOS and unRAID detect the card. Neither detects the NVME drive in the card. I am at the beginning of troubleshooting. I have a Supermicro C7H170-M motherboard unRAID 7.3.2

Did you ever get the Glotrends PA20 adapter to work? I just bought one. The BIOS/OS detects the card but not the drive installed in the card. If not, could you recommend an alternative? (I think I need bifurcation) #Glotrends_SA20 #SA20 #C7H170-M Motherboard: Supermicro C7H170-M Card: Glotrends PA20 Unraid: 7.3.2

The "enable" button is disabled (i.e., greyed out) for Accept Routes in the Tailscale Plugin. I would like to enable this feature so that I can define routes to docker containers. How do I enable the enable button for Accept Routes? tower-diagnostics-20260708-1035.zip

Unraid ver 7.2.4 Motherboard SuperMicro c7h170-m Host Bus Adapter SAS9207-8i H3-25412-00J I am unable to start my array. On the Main Tab, the start button is greyed out. Best the grey start button, "Too many and/or missing disks!" Before performing the following, I took a screenshot of the array. See attached. This issue arose shortly after I thought I had successfully shrunk my array by removing a 380GB HDD. Dev 1 WDC_WD3200JS-57PDB0_WD-WCAPD1857080 (sde) I thought that process went successfully. That drive remains connected. A day later, I had errors on Dev 1 WDC_WD3200JS-57PDB0_WD-WCAPD1857080 (sde). I have had some issues with this drive/connector in the past. In the past, to fix, I had reconnected the drive and cable, rebuilt the drive, and continued. Now, I can't do this because I cannot get the array started. I think the drives might be assigned incorrectly. How can I look where the system is expecting the drives to be? Thanks tower-diagnostics-20260417-1400.zip

Regarding google search: see https://superuser.com/questions/1104537/how-to-repair-the-checksum-of-the-non-volatile-memory-nvm-of-intel-ethernet-co Some of the proposed solutions were too difficult for me. Others seem feasible. I will update if I get it fixed.

Got it to work by reinstalling.

SOLVED: Cannot login to WebUI: "Unable to Connect" New install. docker run -d --name='binhex-nzbget' --net='pearsonproxy' --pids-limit 2048 -e TZ="America/New_York" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Tower" -e HOST_CONTAINERNAME="binhex-nzbget" -e 'SHARED_NETWORK'='no' -e 'PUID'='99' -e 'PGID'='100' -e 'UMASK'='000' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:6789]' -l net.unraid.docker.icon='https://raw.githubusercontent.com/binhex/docker-templates/master/binhex/images/nzbget-icon.png' -p '6789:6789/tcp' -v '/mnt/user/appdata/binhex-nzbget':'/config':'rw' -v '/mnt/user/data/usenet/':'/data':'rw' -v '/mnt/user/binhex_shared/':'/shared':'rw' 'binhex/arch-nzbget' 1ba4362e45fc9077e9e4821d567a25e545dd7d578b033e7d25794e9a67ba8914 The command finished successfully! The docker log file Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2024-09-08 22:02:46.912607 [info] Host is running unRAID 2024-09-08 22:02:46.941091 [info] System information: Linux 1ba4362e45fc 6.1.106-Unraid #1 SMP PREEMPT_DYNAMIC Wed Aug 21 23:36:07 PDT 2024 x86_64 GNU/Linux 2024-09-08 22:02:46.971572 [info] Image tags: IMAGE_RELEASE_TAG=v24.2-01 2024-09-08 22:02:47.021784 [info] PUID defined as '99' 2024-09-08 22:02:47.078802 [info] PGID defined as '100' 2024-09-08 22:02:47.124132 [info] UMASK defined as '000' 2024-09-08 22:02:47.162507 [info] Permissions already set for '/config' 2024-09-08 22:02:47.195955 [info] Deleting files in /tmp (non recursive)... 2024-09-08 22:02:47.251337 [info] SHARED_NETWORK defined as 'no' 2024-09-08 22:02:47.282331 [info] Starting Supervisor... 2024-09-08 22:02:47,492 INFO Included extra file "/etc/supervisor/conf.d/nzbget.conf" during parsing 2024-09-08 22:02:47,496 INFO Set uid to user 0 succeeded 2024-09-08 22:02:47,500 INFO supervisord started with pid 6 2024-09-08 22:02:48,504 INFO spawned: 'nzbget' with pid 59 2024-09-08 22:02:48,505 INFO reaped unknown pid 7 (exit status 0) 2024-09-08 22:02:48,514 DEBG 'nzbget' stdout output: [info] NZBGet configuration file exists [info] Patching NZBGet config file for existing users... 2024-09-08 22:02:48,538 DEBG 'nzbget' stdout output: [info] Starting NZBGet non-daemonised and specify config file (close stdout due to chatter)... 2024-09-08 22:02:49,540 INFO success: nzbget entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)

I think I already had done this. Looking in my supervisor.log -p '8083:8083/tcp' Does this look correct? If it looks okay, what else should I check?

Cannot reach webui on port 8083. command_execution.txt supervisord.log

I am running xfs_repair from command line. Before running, I renamed existing lost + found share to lost + found_20240712. My idea is I will be able to see any newly recovered files in a newly created lost + found share. Is this a good strategy (sometimes unRAID linux share naming is not what I expect)? Side question: why is the syntax xfs_repair -v /dev/md1p1 why p1? This is not mentioned in unRAID docs - Check filesystem Maybe an opportunity to suggest an edit of that page. After running on all drives... Only files/folders in television share (viewing in windows share) is still Generation Kill (2008). located in disk9 and disk12 no new Lost + Found created. Also no new files in old Lost + Found (i.e., lost + found_20240712) when browsed through windows share and through GUI I also tried: xfs_repair -v -L /dev/md1p1 No change in result. The output is below What should I try next? Outputs from xfs_repair are listed below... xfs_repair -v /dev/md1p1 Phase 1 - find and verify superblock... - block cache size set to 739640 entries Phase 2 - using internal log - zero log... zero_log: head block 12776 tail block 12776 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 0 - agno = 2 - agno = 3 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 11:16:57 2024 Phase Start End Duration Phase 1: 07/12 11:11:04 07/12 11:11:05 1 second Phase 2: 07/12 11:11:05 07/12 11:11:08 3 seconds Phase 3: 07/12 11:11:08 07/12 11:14:10 3 minutes, 2 seconds Phase 4: 07/12 11:14:10 07/12 11:14:11 1 second Phase 5: 07/12 11:14:11 07/12 11:14:15 4 seconds Phase 6: 07/12 11:14:15 07/12 11:16:56 2 minutes, 41 seconds Phase 7: 07/12 11:16:56 07/12 11:16:56 Total run time: 5 minutes, 52 seconds done Disk 2 xfs_repair -v /dev/md2p1 Phase 1 - find and verify superblock... - block cache size set to 747544 entries Phase 2 - using internal log - zero log... zero_log: head block 760824 tail block 760824 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 2 - agno = 3 - agno = 0 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 11:26:10 2024 Phase Start End Duration Phase 1: 07/12 11:24:27 07/12 11:24:28 1 second Phase 2: 07/12 11:24:28 07/12 11:24:29 1 second Phase 3: 07/12 11:24:29 07/12 11:25:20 51 seconds Phase 4: 07/12 11:25:20 07/12 11:25:21 1 second Phase 5: 07/12 11:25:21 07/12 11:25:22 1 second Phase 6: 07/12 11:25:22 07/12 11:26:10 48 seconds Phase 7: 07/12 11:26:10 07/12 11:26:10 Total run time: 1 minute, 43 seconds done No new Lost + Found share. Disk 3 xfs_repair -v /dev/md3p1 Phase 1 - find and verify superblock... - block cache size set to 740120 entries Phase 2 - using internal log - zero log... zero_log: head block 266613 tail block 266613 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 3 - agno = 2 - agno = 1 - agno = 4 - agno = 5 - agno = 6 - agno = 7 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 11:31:48 2024 Phase Start End Duration Phase 1: 07/12 11:30:37 07/12 11:30:37 Phase 2: 07/12 11:30:37 07/12 11:30:37 Phase 3: 07/12 11:30:37 07/12 11:31:13 36 seconds Phase 4: 07/12 11:31:13 07/12 11:31:13 Phase 5: 07/12 11:31:13 07/12 11:31:14 1 second Phase 6: 07/12 11:31:14 07/12 11:31:47 33 seconds Phase 7: 07/12 11:31:47 07/12 11:31:47 Total run time: 1 minute, 10 seconds done No new Lost + Found share after Disk 3 repair. Disk 4 xfs_repair -v /dev/md4p1 Phase 1 - find and verify superblock... - block cache size set to 747576 entries Phase 2 - using internal log - zero log... zero_log: head block 266120 tail block 266120 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 3 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 11:42:54 2024 Phase Start End Duration Phase 1: 07/12 11:42:21 07/12 11:42:21 Phase 2: 07/12 11:42:21 07/12 11:42:22 1 second Phase 3: 07/12 11:42:22 07/12 11:42:39 17 seconds Phase 4: 07/12 11:42:39 07/12 11:42:39 Phase 5: 07/12 11:42:39 07/12 11:42:40 1 second Phase 6: 07/12 11:42:40 07/12 11:42:54 14 seconds Phase 7: 07/12 11:42:54 07/12 11:42:54 Total run time: 33 seconds done No new Lost + Found share after Disk 4 repair. Disk 5 xfs_repair -v /dev/md5p1 Phase 1 - find and verify superblock... - block cache size set to 754528 entries Phase 2 - using internal log - zero log... zero_log: head block 5320 tail block 5320 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 2 - agno = 3 - agno = 1 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 11:47:25 2024 Phase Start End Duration Phase 1: 07/12 11:47:24 07/12 11:47:24 Phase 2: 07/12 11:47:24 07/12 11:47:24 Phase 3: 07/12 11:47:24 07/12 11:47:24 Phase 4: 07/12 11:47:24 07/12 11:47:24 Phase 5: 07/12 11:47:24 07/12 11:47:25 1 second Phase 6: 07/12 11:47:25 07/12 11:47:25 Phase 7: 07/12 11:47:25 07/12 11:47:25 Total run time: 1 second done No new Lost + Found share after Disk 5 repair. Disk 6 xfs_repair -v /dev/md6p1 Phase 1 - find and verify superblock... - block cache size set to 725224 entries Phase 2 - using internal log - zero log... zero_log: head block 190587 tail block 190587 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 2 - agno = 1 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 11:53:01 2024 Phase Start End Duration Phase 1: 07/12 11:52:02 07/12 11:52:02 Phase 2: 07/12 11:52:02 07/12 11:52:03 1 second Phase 3: 07/12 11:52:03 07/12 11:52:32 29 seconds Phase 4: 07/12 11:52:32 07/12 11:52:32 Phase 5: 07/12 11:52:32 07/12 11:52:34 2 seconds Phase 6: 07/12 11:52:34 07/12 11:53:00 26 seconds Phase 7: 07/12 11:53:00 07/12 11:53:00 Total run time: 58 seconds done No new Lost + Found share after Disk 6 repair. Disk 7 xfs_repair -v /dev/md7p1 Phase 1 - find and verify superblock... - block cache size set to 740152 entries Phase 2 - using internal log - zero log... zero_log: head block 1630634 tail block 1630634 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 3 - agno = 1 - agno = 2 - agno = 0 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 11:59:59 2024 Phase Start End Duration Phase 1: 07/12 11:59:09 07/12 11:59:09 Phase 2: 07/12 11:59:09 07/12 11:59:10 1 second Phase 3: 07/12 11:59:10 07/12 11:59:35 25 seconds Phase 4: 07/12 11:59:35 07/12 11:59:35 Phase 5: 07/12 11:59:35 07/12 11:59:36 1 second Phase 6: 07/12 11:59:36 07/12 11:59:58 22 seconds Phase 7: 07/12 11:59:58 07/12 11:59:58 Total run time: 49 seconds done Disk 8 xfs_repair -v /dev/md8p1 Phase 1 - find and verify superblock... - block cache size set to 752736 entries Phase 2 - using internal log - zero log... zero_log: head block 9760 tail block 9760 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 5 - agno = 6 - agno = 7 - agno = 3 - agno = 4 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 12:05:11 2024 Phase Start End Duration Phase 1: 07/12 12:05:10 07/12 12:05:10 Phase 2: 07/12 12:05:10 07/12 12:05:11 1 second Phase 3: 07/12 12:05:11 07/12 12:05:11 Phase 4: 07/12 12:05:11 07/12 12:05:11 Phase 5: 07/12 12:05:11 07/12 12:05:11 Phase 6: 07/12 12:05:11 07/12 12:05:11 Phase 7: 07/12 12:05:11 07/12 12:05:11 Total run time: 1 second done Disk 9 - agno = 53 - agno = 54 - agno = 55 - agno = 56 - agno = 57 - agno = 58 - agno = 59 - agno = 60 - agno = 61 - agno = 62 - agno = 63 - agno = 64 - agno = 65 - agno = 66 - agno = 67 - agno = 68 - agno = 69 - agno = 70 - agno = 71 - agno = 72 - agno = 73 - agno = 74 - agno = 75 - agno = 76 - agno = 77 - agno = 78 - agno = 79 - agno = 80 - agno = 81 - agno = 82 - agno = 83 - agno = 84 - agno = 85 - agno = 86 - agno = 87 - agno = 88 - agno = 89 - agno = 90 - agno = 91 - agno = 92 - agno = 93 - agno = 94 - agno = 95 - agno = 96 - agno = 97 - agno = 98 - agno = 99 - agno = 100 - agno = 101 - agno = 102 - agno = 103 - agno = 104 - agno = 105 - agno = 106 - agno = 107 - agno = 108 - agno = 109 - agno = 110 - agno = 111 - agno = 112 - agno = 113 - agno = 114 - agno = 115 - agno = 116 - agno = 117 - agno = 118 - agno = 119 - agno = 120 - agno = 121 - agno = 122 - agno = 123 - agno = 124 - agno = 125 - agno = 126 - agno = 127 - agno = 128 - agno = 129 - agno = 130 - agno = 131 - agno = 132 - agno = 133 - agno = 134 - agno = 135 - agno = 136 - agno = 137 - agno = 138 - agno = 139 - agno = 140 - agno = 141 - agno = 142 - agno = 143 - agno = 144 - agno = 145 - agno = 146 - agno = 147 - agno = 148 - agno = 149 - agno = 150 - agno = 151 - agno = 152 - agno = 153 - agno = 154 - agno = 155 - agno = 156 - agno = 157 - agno = 158 - agno = 159 - agno = 160 - agno = 161 - agno = 162 - agno = 163 - agno = 164 - agno = 165 - agno = 166 - agno = 167 - agno = 168 - agno = 169 - agno = 170 - agno = 171 - agno = 172 - agno = 173 - agno = 174 - agno = 175 - agno = 176 - agno = 177 - agno = 178 - agno = 179 - agno = 180 - agno = 181 - agno = 182 - agno = 183 - agno = 184 - agno = 185 - agno = 186 - agno = 187 - agno = 188 - agno = 189 - agno = 190 - agno = 191 - agno = 192 - agno = 193 - agno = 194 - agno = 195 - agno = 196 - agno = 197 - agno = 198 - agno = 199 - agno = 200 - agno = 201 - agno = 202 - agno = 203 - agno = 204 - agno = 205 - agno = 206 - agno = 207 - agno = 208 - agno = 209 - agno = 210 - agno = 211 - agno = 212 - agno = 213 - agno = 214 - agno = 215 - agno = 216 - agno = 217 - agno = 218 - agno = 219 - agno = 220 - agno = 221 - agno = 222 - agno = 223 - agno = 224 - agno = 225 - agno = 226 - agno = 227 - agno = 228 - agno = 229 - agno = 230 - agno = 231 - agno = 232 - agno = 233 - agno = 234 - agno = 235 - agno = 236 - agno = 237 - agno = 238 - agno = 239 - agno = 240 - agno = 241 - agno = 242 - agno = 243 - agno = 244 - agno = 245 - agno = 246 - agno = 247 - agno = 248 - agno = 249 - agno = 250 - agno = 251 - agno = 252 - agno = 253 - agno = 254 - agno = 255 - agno = 256 - agno = 257 - agno = 258 - agno = 259 - agno = 260 - agno = 261 - agno = 262 - agno = 263 - agno = 264 - agno = 265 - agno = 266 - agno = 267 - agno = 268 - agno = 269 - agno = 270 - agno = 271 - agno = 272 - agno = 273 - agno = 274 - agno = 275 - agno = 276 - agno = 277 - agno = 278 - agno = 279 - agno = 280 - agno = 281 - agno = 282 - agno = 283 - agno = 284 - agno = 285 - agno = 286 - agno = 287 - agno = 288 - agno = 289 - agno = 290 - agno = 291 - agno = 292 - agno = 293 - agno = 294 - agno = 295 - agno = 296 - agno = 297 - agno = 298 - agno = 299 - agno = 300 - agno = 301 - agno = 302 - agno = 303 - agno = 304 - agno = 305 - agno = 306 - agno = 307 - agno = 308 - agno = 309 - agno = 310 - agno = 311 - agno = 312 - agno = 313 - agno = 314 - agno = 315 - agno = 316 - agno = 317 - agno = 318 - agno = 319 - agno = 320 - agno = 321 - agno = 322 - agno = 323 - agno = 324 - agno = 325 - agno = 326 - agno = 327 - agno = 328 - agno = 329 - agno = 330 - agno = 331 - agno = 332 - agno = 333 - agno = 334 - agno = 335 - agno = 336 - agno = 337 - agno = 338 - agno = 339 - agno = 340 - agno = 341 - agno = 342 - agno = 343 - agno = 344 - agno = 345 - agno = 346 - agno = 347 - agno = 348 - agno = 349 - agno = 350 - agno = 351 - agno = 352 - agno = 353 - agno = 354 - agno = 355 - agno = 356 - agno = 357 - agno = 358 - agno = 359 - agno = 360 - agno = 361 - agno = 362 - agno = 363 - agno = 364 - agno = 365 - agno = 366 - agno = 367 - agno = 368 - agno = 369 - agno = 370 - agno = 371 - agno = 372 - agno = 373 - agno = 374 - agno = 375 - agno = 376 - agno = 377 - agno = 378 - agno = 379 - agno = 380 - agno = 381 - agno = 382 - agno = 383 - agno = 384 - agno = 385 - agno = 386 - agno = 387 - agno = 388 - agno = 389 - agno = 390 - agno = 391 - agno = 392 - agno = 393 - agno = 394 - agno = 395 - agno = 396 - agno = 397 - agno = 398 - agno = 399 - agno = 400 - agno = 401 - agno = 402 - agno = 403 - agno = 404 - agno = 405 - agno = 406 - agno = 407 - agno = 408 - agno = 409 - agno = 410 - agno = 411 - agno = 412 - agno = 413 - agno = 414 - agno = 415 - agno = 416 - agno = 417 - agno = 418 - agno = 419 - agno = 420 - agno = 421 - agno = 422 - agno = 423 - agno = 424 - agno = 425 - agno = 426 - agno = 427 - agno = 428 - agno = 429 - agno = 430 - agno = 431 - agno = 432 - agno = 433 - agno = 434 - agno = 435 - agno = 436 - agno = 437 - agno = 438 - agno = 439 - agno = 440 - agno = 441 - agno = 442 - agno = 443 - agno = 444 - agno = 445 - agno = 446 - agno = 447 - agno = 448 - agno = 449 - agno = 450 - agno = 451 - agno = 452 - agno = 453 - agno = 454 - agno = 455 - agno = 456 - agno = 457 - agno = 458 - agno = 459 - agno = 460 - agno = 461 - agno = 462 - agno = 463 - agno = 464 - agno = 465 - agno = 466 - agno = 467 - agno = 468 - agno = 469 - agno = 470 - agno = 471 - agno = 472 - agno = 473 - agno = 474 - agno = 475 - agno = 476 - agno = 477 - agno = 478 - agno = 479 - agno = 480 - agno = 481 - agno = 482 - agno = 483 - agno = 484 - agno = 485 - agno = 486 - agno = 487 - agno = 488 - agno = 489 - agno = 490 - agno = 491 - agno = 492 - agno = 493 - agno = 494 - agno = 495 - agno = 496 - agno = 497 - agno = 498 - agno = 499 - agno = 500 - agno = 501 - agno = 502 - agno = 503 - agno = 504 - agno = 505 - agno = 506 - agno = 507 - agno = 508 - agno = 509 - agno = 510 - agno = 511 - agno = 512 - agno = 513 - agno = 514 - agno = 515 - agno = 516 - agno = 517 - agno = 518 - agno = 519 - agno = 520 - agno = 521 - agno = 522 - agno = 523 - agno = 524 - agno = 525 - agno = 526 - agno = 527 - agno = 528 - agno = 529 - agno = 530 - agno = 531 - agno = 532 - agno = 533 - 12:07:39: rebuild AG headers and trees - 534 of 534 allocation groups done - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 240 - agno = 360 - agno = 0 - agno = 450 - agno = 390 - agno = 60 - agno = 180 - agno = 330 - agno = 300 - agno = 90 - agno = 420 - agno = 120 - agno = 210 - agno = 30 - agno = 270 - agno = 150 - agno = 480 - agno = 510 - agno = 241 - agno = 181 - agno = 242 - agno = 182 - agno = 211 - agno = 331 - agno = 361 - agno = 451 - agno = 481 - agno = 1 - agno = 31 - agno = 61 - agno = 91 - agno = 121 - agno = 151 - agno = 271 - agno = 301 - agno = 421 - agno = 511 - agno = 183 - agno = 212 - agno = 243 - agno = 2 - agno = 391 - agno = 184 - agno = 213 - agno = 244 - agno = 3 - agno = 152 - agno = 332 - agno = 362 - agno = 32 - agno = 122 - agno = 185 - agno = 214 - agno = 245 - agno = 302 - agno = 452 - agno = 92 - agno = 272 - agno = 482 - agno = 4 - agno = 123 - agno = 186 - agno = 215 - agno = 246 - agno = 422 - agno = 62 - agno = 512 - agno = 5 - agno = 187 - agno = 216 - agno = 247 - agno = 303 - agno = 363 - agno = 392 - agno = 33 - agno = 93 - agno = 153 - agno = 273 - agno = 333 - agno = 217 - agno = 188 - agno = 6 - agno = 453 - agno = 248 - agno = 63 - agno = 483 - agno = 218 - agno = 7 - agno = 189 - agno = 364 - agno = 423 - agno = 393 - agno = 513 - agno = 219 - agno = 274 - agno = 304 - agno = 334 - agno = 8 - agno = 34 - agno = 124 - agno = 154 - agno = 190 - agno = 454 - agno = 94 - agno = 220 - agno = 249 - agno = 64 - agno = 191 - agno = 221 - agno = 365 - agno = 9 - agno = 192 - agno = 424 - agno = 394 - agno = 484 - agno = 514 - agno = 155 - agno = 222 - agno = 275 - agno = 305 - agno = 335 - agno = 35 - agno = 95 - agno = 193 - agno = 455 - agno = 125 - agno = 223 - agno = 156 - agno = 194 - agno = 65 - agno = 224 - agno = 10 - agno = 157 - agno = 195 - agno = 276 - agno = 306 - agno = 336 - agno = 366 - agno = 36 - agno = 395 - agno = 485 - agno = 515 - agno = 96 - agno = 158 - agno = 196 - agno = 225 - agno = 425 - agno = 159 - agno = 456 - agno = 126 - agno = 197 - agno = 226 - agno = 337 - agno = 66 - agno = 160 - agno = 277 - agno = 367 - agno = 37 - agno = 161 - agno = 198 - agno = 227 - agno = 486 - agno = 516 - agno = 162 - agno = 307 - agno = 426 - agno = 97 - agno = 228 - agno = 163 - agno = 396 - agno = 457 - agno = 67 - agno = 199 - agno = 229 - agno = 338 - agno = 127 - agno = 164 - agno = 278 - agno = 38 - agno = 200 - agno = 230 - agno = 250 - agno = 308 - agno = 98 - agno = 368 - agno = 487 - agno = 517 - agno = 39 - agno = 165 - agno = 201 - agno = 231 - agno = 397 - agno = 458 - agno = 68 - agno = 339 - agno = 40 - agno = 128 - agno = 202 - agno = 232 - agno = 279 - agno = 427 - agno = 166 - agno = 41 - agno = 99 - agno = 203 - agno = 233 - agno = 167 - agno = 309 - agno = 11 - agno = 42 - agno = 204 - agno = 234 - agno = 398 - agno = 488 - agno = 518 - agno = 168 - agno = 369 - agno = 459 - agno = 205 - agno = 235 - agno = 340 - agno = 43 - agno = 129 - agno = 169 - agno = 251 - agno = 280 - agno = 310 - agno = 428 - agno = 69 - agno = 100 - agno = 236 - agno = 44 - agno = 170 - agno = 206 - agno = 399 - agno = 12 - agno = 237 - agno = 460 - agno = 519 - agno = 45 - agno = 171 - agno = 207 - agno = 281 - agno = 489 - agno = 238 - agno = 311 - agno = 370 - agno = 46 - agno = 172 - agno = 101 - agno = 130 - agno = 173 - agno = 239 - agno = 341 - agno = 429 - agno = 47 - agno = 174 - agno = 282 - agno = 175 - agno = 208 - agno = 400 - agno = 520 - agno = 48 - agno = 70 - agno = 371 - agno = 461 - agno = 490 - agno = 13 - agno = 176 - agno = 209 - agno = 102 - agno = 312 - agno = 342 - agno = 49 - agno = 131 - agno = 177 - agno = 283 - agno = 430 - agno = 50 - agno = 178 - agno = 521 - agno = 71 - agno = 491 - agno = 462 - agno = 14 - agno = 51 - agno = 103 - agno = 284 - agno = 313 - agno = 372 - agno = 343 - agno = 401 - agno = 179 - agno = 132 - agno = 252 - agno = 431 - agno = 463 - agno = 52 - agno = 72 - agno = 314 - agno = 15 - agno = 344 - agno = 492 - agno = 522 - agno = 53 - agno = 104 - agno = 285 - agno = 373 - agno = 402 - agno = 464 - agno = 133 - agno = 315 - agno = 345 - agno = 432 - agno = 73 - agno = 105 - agno = 286 - agno = 493 - agno = 523 - agno = 16 - agno = 54 - agno = 403 - agno = 465 - agno = 374 - agno = 134 - agno = 316 - agno = 55 - agno = 287 - agno = 346 - agno = 433 - agno = 524 - agno = 74 - agno = 106 - agno = 56 - agno = 494 - agno = 466 - agno = 17 - agno = 253 - agno = 404 - agno = 288 - agno = 375 - agno = 57 - agno = 75 - agno = 107 - agno = 135 - agno = 317 - agno = 347 - agno = 525 - agno = 495 - agno = 467 - agno = 18 - agno = 434 - agno = 58 - agno = 108 - agno = 405 - agno = 76 - agno = 136 - agno = 289 - agno = 348 - agno = 376 - agno = 318 - agno = 77 - agno = 526 - agno = 59 - agno = 468 - agno = 496 - agno = 19 - agno = 109 - agno = 137 - agno = 290 - agno = 349 - agno = 319 - agno = 435 - agno = 377 - agno = 78 - agno = 254 - agno = 406 - agno = 469 - agno = 497 - agno = 20 - agno = 527 - agno = 110 - agno = 138 - agno = 291 - agno = 350 - agno = 436 - agno = 320 - agno = 378 - agno = 407 - agno = 528 - agno = 351 - agno = 111 - agno = 470 - agno = 498 - agno = 321 - agno = 139 - agno = 292 - agno = 437 - agno = 21 - agno = 79 - agno = 379 - agno = 408 - agno = 529 - agno = 352 - agno = 471 - agno = 499 - agno = 112 - agno = 322 - agno = 380 - agno = 140 - agno = 293 - agno = 409 - agno = 22 - agno = 438 - agno = 80 - agno = 353 - agno = 472 - agno = 500 - agno = 323 - agno = 113 - agno = 530 - agno = 294 - agno = 141 - agno = 381 - agno = 410 - agno = 354 - agno = 439 - agno = 23 - agno = 81 - agno = 501 - agno = 531 - agno = 114 - agno = 473 - agno = 255 - agno = 295 - agno = 324 - agno = 115 - agno = 355 - agno = 142 - agno = 440 - agno = 116 - agno = 382 - agno = 411 - agno = 24 - agno = 532 - agno = 82 - agno = 502 - agno = 117 - agno = 474 - agno = 296 - agno = 325 - agno = 356 - agno = 143 - agno = 383 - agno = 441 - agno = 533 - agno = 412 - agno = 25 - agno = 83 - agno = 475 - agno = 503 - agno = 326 - agno = 256 - agno = 297 - agno = 144 - agno = 442 - agno = 357 - agno = 26 - agno = 384 - agno = 413 - agno = 145 - agno = 298 - agno = 327 - agno = 504 - agno = 84 - agno = 257 - agno = 476 - agno = 358 - agno = 443 - agno = 27 - agno = 328 - agno = 414 - agno = 299 - agno = 385 - agno = 505 - agno = 85 - agno = 118 - agno = 146 - agno = 477 - agno = 258 - agno = 359 - agno = 329 - agno = 444 - agno = 28 - agno = 386 - agno = 506 - agno = 147 - agno = 415 - agno = 259 - agno = 119 - agno = 86 - agno = 445 - agno = 478 - agno = 29 - agno = 148 - agno = 260 - agno = 387 - agno = 507 - agno = 416 - agno = 87 - agno = 261 - agno = 479 - agno = 446 - agno = 149 - agno = 388 - agno = 508 - agno = 88 - agno = 417 - agno = 262 - agno = 389 - agno = 447 - agno = 89 - agno = 509 - agno = 263 - agno = 418 - agno = 448 - agno = 264 - agno = 419 - agno = 449 - agno = 265 - agno = 266 - agno = 267 - agno = 268 - agno = 269 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... - 12:08:52: verify and correct link counts - 534 of 534 allocation groups done XFS_REPAIR Summary Fri Jul 12 12:09:02 2024 Phase Start End Duration Phase 1: 07/12 12:06:01 07/12 12:06:05 4 seconds Phase 2: 07/12 12:06:05 07/12 12:06:11 6 seconds Phase 3: 07/12 12:06:11 07/12 12:07:26 1 minute, 15 seconds Phase 4: 07/12 12:07:26 07/12 12:07:27 1 second Phase 5: 07/12 12:07:27 07/12 12:07:39 12 seconds Phase 6: 07/12 12:07:39 07/12 12:08:52 1 minute, 13 seconds Phase 7: 07/12 12:08:52 07/12 12:08:52 Total run time: 2 minutes, 51 seconds done Disk 10 fs_repair -v /dev/md10p1 Phase 1 - find and verify superblock... - block cache size set to 725128 entries Phase 2 - using internal log - zero log... zero_log: head block 3373704 tail block 3373704 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 0 - agno = 3 - agno = 2 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 12:18:05 2024 Phase Start End Duration Phase 1: 07/12 12:16:34 07/12 12:16:34 Phase 2: 07/12 12:16:34 07/12 12:16:35 1 second Phase 3: 07/12 12:16:35 07/12 12:17:22 47 seconds Phase 4: 07/12 12:17:22 07/12 12:17:22 Phase 5: 07/12 12:17:22 07/12 12:17:23 1 second Phase 6: 07/12 12:17:23 07/12 12:18:05 42 seconds Phase 7: 07/12 12:18:05 07/12 12:18:05 Total run time: 1 minute, 31 seconds done Disk 11 xfs_repair -v /dev/md11p1 Phase 1 - find and verify superblock... - block cache size set to 740216 entries Phase 2 - using internal log - zero log... zero_log: head block 3269 tail block 3269 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 2 - agno = 3 - agno = 1 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 12:21:01 2024 Phase Start End Duration Phase 1: 07/12 12:21:00 07/12 12:21:00 Phase 2: 07/12 12:21:00 07/12 12:21:00 Phase 3: 07/12 12:21:00 07/12 12:21:00 Phase 4: 07/12 12:21:00 07/12 12:21:00 Phase 5: 07/12 12:21:00 07/12 12:21:01 1 second Phase 6: 07/12 12:21:01 07/12 12:21:01 Phase 7: 07/12 12:21:01 07/12 12:21:01 Total run time: 1 second done Disk 12 root@Tower:~# xfs_repair -v /dev/md12p1 Phase 1 - find and verify superblock... - block cache size set to 725312 entries Phase 2 - using internal log - zero log... zero_log: head block 84944 tail block 84944 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 2 - agno = 3 - agno = 1 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Fri Jul 12 12:21:59 2024 Phase Start End Duration Phase 1: 07/12 12:21:54 07/12 12:21:55 1 second Phase 2: 07/12 12:21:55 07/12 12:21:55 Phase 3: 07/12 12:21:55 07/12 12:21:57 2 seconds Phase 4: 07/12 12:21:57 07/12 12:21:57 Phase 5: 07/12 12:21:57 07/12 12:21:57 Phase 6: 07/12 12:21:57 07/12 12:21:59 2 seconds Phase 7: 07/12 12:21:59 07/12 12:21:59 Total run time: 5 seconds done Disk 1 xfs_repair -v -L /dev/md1p1 xfs_repair -v -L /dev/md1p1 Phase 1 - find and verify superblock... - block cache size set to 739640 entries Phase 2 - using internal log - zero log... zero_log: head block 957149 tail block 957149 - scan filesystem freespace and inode maps... clearing needsrepair flag and regenerating metadata - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 2 - agno = 0 - agno = 3 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... Maximum metadata LSN (17:957145) is ahead of log (1:2). Format log to cycle 20. XFS_REPAIR Summary Fri Jul 12 16:36:59 2024 Phase Start End Duration Phase 1: 07/12 16:26:06 07/12 16:26:07 1 second Phase 2: 07/12 16:26:07 07/12 16:26:29 22 seconds Phase 3: 07/12 16:26:29 07/12 16:31:34 5 minutes, 5 seconds Phase 4: 07/12 16:31:34 07/12 16:31:35 1 second Phase 5: 07/12 16:31:35 07/12 16:31:38 3 seconds Phase 6: 07/12 16:31:38 07/12 16:35:57 4 minutes, 19 seconds Phase 7: 07/12 16:35:57 07/12 16:35:57 Total run time: 9 minutes, 51 seconds done

JorgeB Is your implication that files may be deleted as opposed to being lost? I do not remember my pre-incident drive consumption very well. Drives 5, 8, and 11 are currently the least used in the array. Drives 5, 8, 11 are the oldest and generally smallest.