Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,858

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    See if this helps: https://wiki.unraid.net/My_Servers#How_to_disable_SSL_for_local_access
  2. JorgeB
    Was the array started?
  3. JorgeB
    Issues with disk10, check/replace cables and post new diags.
  4. JorgeB
    It is, data drives are never touched, as long as parity is correctly assigned you're fine, and you can check "parity is already valid" before array start to avoid the parity sync, assuming it is valid, in doubt run a parity check after.
  5. JorgeB
    Looks like a USB problem, make sure the flash drive is using a USB 2.0 port if available.
  6. JorgeB
    Sleeping monitor should be OK, though I believe seep is not enabled in Unraid by default, so the dummy plug is probably the best solution, if it works.
  7. JorgeB
    It is but like mentioned your pool was out of sync due to dropping devices, see here for better pool monitoring so you can take immediate action if it happens again.
  8. JorgeB
    Try the just released v6.11.0 to see if there’s any difference.
  9. JorgeB
    With Linux it's usually under /var/log/syslog, but I've never used Mint, though it should be easy to find with google if it's not that.
  10. JorgeB
    Did the monitor go to sleep? Though I think it should still work, even when sleeping.
  11. JorgeB
    Try simplifying you LAN as much as possible, also make sure date and time are correctly set, you can also delete/rename network.cfg and reboot in case there's some misconfiguration there, it will go back to using the defaults, if that doesn't help likely there's a LAN config problem,
  12. JorgeB
    IPADDR="192.168.68.111" NETMASK="255.255.224.0" GATEWAY="192.168.681.1" Note that the gateway is wrong (x.x.681.x)
  13. JorgeB
    Try changing your DNS servers to 208.67.222.222 and 208.67.220.220
  14. JorgeB
    Without diags not much I can help, first you need to get the server back up, pool issues should cause server connection issues, and it won't if the server is not auto-starting, if it is disable that.
  15. JorgeB
    Do you have a monitor plugged in? If not using a VGA or HDMI dummy plug *might* help.
  16. JorgeB
    Good to have a flash drive backups and an array screenshot but it should be pretty straight forward, and no need to backups the docker image, it can easily be recreated.
  17. JorgeB
    You removed the diags, do you know what this is? client: 172.17.0.2
  18. JorgeB
    This would be best posted in the UD plugin support thread, but possibly you'll need to enable SMB1 if using Unraid v6.10.x, it's disabled by default.
  19. JorgeB
    During the re-sync monitor syslog to see if there are still disk related errors.
  20. JorgeB
    Since parity is invalid you'll need to do a new config to re-enable disk3 and re-sync parity.
  21. JorgeB
    Still nothing that suggests a disk problem, my best guess is still RAM related, or a plugin issue, you can run an extended SMART test on the disk confirm it's good.
  22. JorgeB
    No disk errors are logged, but post the complete diagnostics, maybe something will jump out.
  23. JorgeB
    Check the split level setting, it overrides that, if the folder exists there it will be copied there.
  24. JorgeB
    That suggests the flash drive was not correctly created, try with a different one, just with a new install, don't restore anything, just to see if it boots.
  25. JorgeB
    You can delete the HBA BIOS, it's not needed for Unraid and it should no longer take that long.
×
×
  • Create New...