wgstarks

I improved my speeds a great deal by using a drive mounted outside the array for /downloads. You won’t have parity protection for your torrents but that didn’t really matter for my setup.

Not that I’ve had any issues, but I could not figure out what proxy settings to use in Deluge, Radarr and Sonarr when I first set them up so I left them disabled. What settings should I be using? Edit: Really just the deluge app. If I set http, IP and port in the proxy settings I get about a 40%(ish) speed drop and lots of tracker errors. Maybe this is normal???

I tried this a few days ago. You’ll find the posts if you look back a page or two. TL;DR- I could ping between the various dockers. I could connect to Deluge via the thin client but not from Sonarr, Radarr or webUI. Never could get it to work and finally gave up on it. If you do get this to work please post your process.

I noticed today that my netdata docker log is full of warnings- --- BEGIN TRACE --- --- END TRACE --- 2018-01-23 16:54:33: charts.d: : apcupsd: command 'apcaccess status 127.0.0.1:3551 ' failed: --- BEGIN TRACE --- --- END TRACE --- 2018-01-23 16:55:23: charts.d: : apcupsd: command 'apcaccess status 127.0.0.1:3551 ' failed: --- BEGIN TRACE --- --- END TRACE --- 2018-01-23 16:59:53: charts.d: : apcupsd: command 'apcaccess status 127.0.0.1:3551 ' failed: --- BEGIN TRACE --- --- END TRACE --- 2018-01-23 17:02:03: charts.d: : apcupsd: command 'apcaccess status 127.0.0.1:3551 ' failed: --- BEGIN TRACE --- --- END TRACE --- 2018-01-23 17:09:23: charts.d: : apcupsd: command 'apcaccess status 127.0.0.1:3551 ' failed: --- BEGIN TRACE --- --- END TRACE --- 2018-01-23 17:12:15: netdata ERROR : PLUGIN[proc]: File /var/cache/netdata/disk_qops.sda/main.db is too old. Clearing it. Not quite sure what they mean? The apcupsd data is all being displayed in the docker web page.

I’m not sure there is such a status. What you are seeing is that the drive can either be precleared again or formatted. Not sure what behavior you’re expecting. Maybe I’m missing something?

I did too. Guess life is full of surprises.?

I believe this is your problem. You need to use something like /media/movies and /media/tvshows.

What happens when you click the red X?

It’s all outlined in the github and docker hub links in the OP. Scroll down to the setup section.

Linux 4.14.13-unRAID. Last login: Sat Jan 20 08:34:46 -0500 2018 on /dev/pts/0. root@Brunnhilde:~# /usr/sbin/ipmi-sensors --comma-separated-output --output-sensor-state --no-header-output --interpret-oem-data --always-prefix -h 10.0.1.22 -u wgstarks -p redacted --session-timeout=5000 --retransmission-timeout=1000 10.0.1.22: 4,CPU Temp,Temperature,Nominal,35.00,C,'OK' 10.0.1.22: 71,System Temp,Temperature,Nominal,30.00,C,'OK' 10.0.1.22: 138,Peripheral Temp,Temperature,Nominal,33.00,C,'OK' 10.0.1.22: 205,PCH Temp,Temperature,Nominal,47.00,C,'OK' 10.0.1.22: 272,P1-DIMMA1 Temp,Temperature,Nominal,28.00,C,'OK' 10.0.1.22: 339,P1-DIMMA2 Temp,Temperature,N/A,N/A,C,N/A 10.0.1.22: 406,P1-DIMMB1 Temp,Temperature,Nominal,28.00,C,'OK' 10.0.1.22: 473,P1-DIMMB2 Temp,Temperature,N/A,N/A,C,N/A 10.0.1.22: 540,FAN1,Fan,Nominal,1100.00,RPM,'OK' 10.0.1.22: 607,FAN2,Fan,Nominal,1100.00,RPM,'OK' 10.0.1.22: 674,FAN3,Fan,Nominal,1100.00,RPM,'OK' 10.0.1.22: 741,FAN4,Fan,Nominal,1900.00,RPM,'OK' 10.0.1.22: 808,FANA,Fan,Nominal,1100.00,RPM,'OK' 10.0.1.22: 875,Vcpu,Voltage,Nominal,1.83,V,'OK' 10.0.1.22: 942,VDIMM,Voltage,Nominal,1.48,V,'OK' 10.0.1.22: 1009,12V,Voltage,Nominal,12.19,V,'OK' 10.0.1.22: 1076,5VCC,Voltage,Nominal,5.03,V,'OK' 10.0.1.22: 1143,3.3VCC,Voltage,Nominal,3.27,V,'OK' 10.0.1.22: 1210,VBAT,Voltage,Nominal,3.06,V,'OK' 10.0.1.22: 1277,5V Dual,Voltage,Nominal,5.05,V,'OK' 10.0.1.22: 1344,3.3V AUX,Voltage,Nominal,3.30,V,'OK' 10.0.1.22: 1411,1.2V BMC,Voltage,Nominal,1.26,V,'OK' 10.0.1.22: 1478,1.05V PCH,Voltage,Nominal,1.05,V,'OK' 10.0.1.22: 1545,Chassis Intru,Physical Security,Nominal,N/A,N/A,'OK' root@Brunnhilde:~#

Nevermind. I should have just looked for myself. I’m getting lazy in my old age. W: 2018/01/22 10:28:16 ipmi.go:97: ipmi:args:([--comma-separated-output --output-sensor-state --no-header-output --interpret-oem-data --always-prefix -h 10.0.1.22 -u wgstarks -p redacted --session-timeout=5000 --retransmission-timeout=1000])

Plugin started. Don’t see any ipmi:args in system log. Or is there a seperate log for ControlR?

As it shows, you’ll need to update unRAID to 6.4.0.

Also check out the github or docker hub pages linked in the OP. They have setup instructions.

I got the same with CLI. Used the webGUI and just manually entered the cert dir path and I think that part is fixed. Jan 20 08:36:48 Brunnhilde ool www[1414]: /usr/local/emhttp/plugins/controlr/scripts/stop Jan 20 08:36:55 Brunnhilde ool www[27202]: /usr/local/emhttp/plugins/controlr/scripts/start Jan 20 08:36:55 Brunnhilde sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/usr/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir '/boot/config/ssl/certs' Plugin still doesn't start though.

Updated the plugin and now can't get it to start- Also, can't delete the cert dir. Clip from sys log- Jan 19 20:19:09 Brunnhilde ool www[22902]: /usr/local/emhttp/plugins/controlr/scripts/start Jan 19 20:19:09 Brunnhilde sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/usr/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir ''

Ok. I deleted and re-installed the docker and appdata folder. The template has changed so there were a few surprises. PIA isn't automatic anymore I guess. Had to download and install the pia netherlands ovpn file to get the docker started. Now it shows that it is started but I can't access the webUI and I don't see any network activity. Docker log- ErrorWarningSystemArrayLogin Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2018-01-19 17:47:51.810764 [info] Host is running unRAID 2018-01-19 17:47:51.828269 [info] System information Linux 67cd571490c9 4.14.13-unRAID #1 SMP PREEMPT Wed Jan 10 10:27:09 PST 2018 x86_64 GNU/Linux 2018-01-19 17:47:51.847997 [info] PUID defined as '99' 2018-01-19 17:47:51.868696 [info] PGID defined as '100' 2018-01-19 17:47:51.905167 [info] UMASK defined as '000' 2018-01-19 17:47:51.924505 [info] Setting permissions recursively on volume mappings... 2018-01-19 17:47:52.191873 [info] VPN_ENABLED defined as 'yes' 2018-01-19 17:47:52.215120 [crit] No OpenVPN config file located in /config/openvpn/ (ovpn extension), please download from your VPN provider and then restart this container, exiting... Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2018-01-19 17:48:09.456351 [info] Host is running unRAID 2018-01-19 17:48:09.473583 [info] System information Linux 67cd571490c9 4.14.13-unRAID #1 SMP PREEMPT Wed Jan 10 10:27:09 PST 2018 x86_64 GNU/Linux 2018-01-19 17:48:09.492912 [info] PUID defined as '99' 2018-01-19 17:48:09.512868 [info] PGID defined as '100' 2018-01-19 17:48:09.550533 [info] UMASK defined as '000' 2018-01-19 17:48:09.569677 [info] Permissions already set for volume mappings 2018-01-19 17:48:09.591203 [info] VPN_ENABLED defined as 'yes' 2018-01-19 17:48:09.612453 [crit] No OpenVPN config file located in /config/openvpn/ (ovpn extension), please download from your VPN provider and then restart this container, exiting... Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2018-01-19 17:48:21.813108 [info] Host is running unRAID 2018-01-19 17:48:21.830235 [info] System information Linux 67cd571490c9 4.14.13-unRAID #1 SMP PREEMPT Wed Jan 10 10:27:09 PST 2018 x86_64 GNU/Linux 2018-01-19 17:48:21.849746 [info] PUID defined as '99' 2018-01-19 17:48:21.869899 [info] PGID defined as '100' 2018-01-19 17:48:21.910129 [info] UMASK defined as '000' 2018-01-19 17:48:21.928933 [info] Permissions already set for volume mappings 2018-01-19 17:48:21.949938 [info] VPN_ENABLED defined as 'yes' 2018-01-19 17:48:21.970888 [crit] No OpenVPN config file located in /config/openvpn/ (ovpn extension), please download from your VPN provider and then restart this container, exiting... Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2018-01-19 18:04:08.186080 [info] Host is running unRAID 2018-01-19 18:04:08.205915 [info] System information Linux 67cd571490c9 4.14.13-unRAID #1 SMP PREEMPT Wed Jan 10 10:27:09 PST 2018 x86_64 GNU/Linux 2018-01-19 18:04:08.225620 [info] PUID defined as '99' 2018-01-19 18:04:08.246674 [info] PGID defined as '100' 2018-01-19 18:04:08.286041 [info] UMASK defined as '000' 2018-01-19 18:04:08.305234 [info] Permissions already set for volume mappings 2018-01-19 18:04:08.329381 [info] VPN_ENABLED defined as 'yes' 2018-01-19 18:04:08.352429 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/Netherlands.ovpn dos2unix: converting file /config/openvpn/Netherlands.ovpn to Unix format... 2018-01-19 18:04:08.373597 [info] VPN remote line defined as 'nl.privateinternetaccess.com 1198' 2018-01-19 18:04:08.394204 [info] VPN_REMOTE defined as 'nl.privateinternetaccess.com' 2018-01-19 18:04:08.414392 [info] VPN_PORT defined as '1198' 2018-01-19 18:04:08.434772 [info] VPN_PROTOCOL defined as 'udp' 2018-01-19 18:04:08.454870 [info] VPN_DEVICE_TYPE defined as 'tun' 2018-01-19 18:04:08.478175 [info] VPN_PROV defined as 'pia' 2018-01-19 18:04:08.498937 [info] LAN_NETWORK defined as '10.0.1.0/24' 2018-01-19 18:04:08.521418 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,8.8.8.8,209.222.18.218,37.235.1.177,8.8.4.4' 2018-01-19 18:04:08.542362 [info] VPN_USER defined as 'redacted' 2018-01-19 18:04:08.562650 [info] VPN_PASS defined as 'redacted' 2018-01-19 18:04:08.585077 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2018-01-19 18:04:08.605051 [info] STRICT_PORT_FORWARD defined as 'yes' 2018-01-19 18:04:08.625644 [info] ENABLE_PRIVOXY defined as 'no' 2018-01-19 18:04:08.643373 [info] Setting permissions on files/folders inside container... 2018-01-19 18:04:08.666403 [info] Starting Supervisor... 2018-01-19 18:04:08,793 CRIT Set uid to user 0 2018-01-19 18:04:08,793 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing 2018-01-19 18:04:08,795 INFO supervisord started with pid 7 2018-01-19 18:04:09,797 INFO spawned: 'start-script' with pid 131 2018-01-19 18:04:09,798 INFO spawned: 'deluge-script' with pid 132 2018-01-19 18:04:09,799 INFO spawned: 'deluge-web-script' with pid 133 2018-01-19 18:04:09,800 INFO spawned: 'privoxy-script' with pid 134 2018-01-19 18:04:09,800 INFO reaped unknown pid 8 2018-01-19 18:04:09,803 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2018-01-19 18:04:09,804 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-01-19 18:04:09,804 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-01-19 18:04:09,804 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-01-19 18:04:09,804 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-01-19 18:04:09,804 DEBG 'deluge-script' stdout output: [info] Deluge config file doesn't exist, copying default... 2018-01-19 18:04:09,806 DEBG 'privoxy-script' stdout output: [info] Privoxy set to disabled 2018-01-19 18:04:09,807 DEBG fd 22 closed, stopped monitoring <POutputDispatcher at 23041927756400 for <Subprocess at 23041927754456 with name privoxy-script in state RUNNING> (stdout)> 2018-01-19 18:04:09,807 DEBG fd 26 closed, stopped monitoring <POutputDispatcher at 23041927756832 for <Subprocess at 23041927754456 with name privoxy-script in state RUNNING> (stderr)> 2018-01-19 18:04:09,807 INFO exited: privoxy-script (exit status 0; expected) 2018-01-19 18:04:09,807 DEBG received SIGCLD indicating a child quit 2018-01-19 18:04:09,816 DEBG 'deluge-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2018-01-19 18:04:09,839 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2018-01-19 18:04:09,841 DEBG 'start-script' stdout output: [info] Adding 209.222.18.222 to /etc/resolv.conf 2018-01-19 18:04:09,843 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2018-01-19 18:04:09,846 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2018-01-19 18:04:09,848 DEBG 'start-script' stdout output: [info] Adding 209.222.18.218 to /etc/resolv.conf 2018-01-19 18:04:09,850 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2018-01-19 18:04:09,853 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2018-01-19 18:04:09,903 DEBG 'start-script' stdout output: [info] Adding 10.0.1.0/24 as route via docker eth0 2018-01-19 18:04:09,904 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2018-01-19 18:04:09,904 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 10.0.1.0/24 via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.7 2018-01-19 18:04:09,904 DEBG 'start-script' stdout output: -------------------- 2018-01-19 18:04:09,908 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2018-01-19 18:04:09,920 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2018-01-19 18:04:10,079 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2018-01-19 18:04:10,080 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A INPUT -s 10.0.1.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A OUTPUT -d 10.0.1.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2018-01-19 18:04:10,080 DEBG 'start-script' stdout output: -------------------- 2018-01-19 18:04:10,080 DEBG 'start-script' stdout output: [info] Starting OpenVPN... 2018-01-19 18:04:10,108 DEBG 'start-script' stdout output: Options error: --ca fails with 'ca.rsa.2048.crt': No such file or directory (errno=2) Options error: --crl-verify fails with 'crl.rsa.2048.pem': No such file or directory (errno=2) Fri Jan 19 18:04:10 2018 WARNING: file 'credentials.conf' is group or others accessible Options error: Please correct these errors. Use --help for more information. 2018-01-19 18:04:10,108 DEBG 'start-script' stdout output: [info] OpenVPN started supervisord.log EDIT: NEVERMIND I wasn't even thinking about backups. Restored from an app data backup and now everything seems to be working. I think I'll just leave everything alone for now.

When I try to start the docker I get a pop up saying “no such container”???

My primary goal is just to make use of my second (unused) nic. Figured if i could move torrents to the second nic it might help relieve port congestion.

Now i can't reset the docker back to bridge mode. I just get a blank web page when I try to apply the settings. supervisord.log

This isn’t going to work. I can’t change the subnet. I am either use 10.0.1.0 or 10.0.1.128. I tried just not setting a custom pool at all but that failed too.

IDK. It’s an optional setting. Maybe the idea was to give an example? Probably for most people 10.x.x.x would be completely different from their LAN.

That was actually the suggested setting ie it was already present in the settings and I put a check mark in the box.

Alright, I get that I think. And then set a static IP of 10.0.2.200 and 10.0.1.0/24 in the LAN_NETWORK Deluge configuration?