wgstarks

I've never had any trouble getting HFS+ to mount in UD, but if you install Paragon EXTFS on your Mac you can use EXT4 disks. There may be other driver packages as well. Read/writes can be a little slow on the Mac though.

Found that about half my dockers were stopped (Jackett, NowShowing, OpenVPN-AS and PlexMediaServer) and wouldn't start. Couldn't get a diagnostics. I was able to open the webgui but when I tried to download diagnostics I got a 404 error. Connected via telnet and ran diagnostics and got a warning that the file couldn't be written because there was no space left on the disk even though I have 15 GB free on flash. After rebooting everything seems to be ok. The only thing I see that is unusual is that the docker log is at 17%. Seems a little high since the server has only been up about 5 minutes, but not sure how to check for spamming? I've attached the current diagnostics. Might show something. Never seen anything like this before. Maybe it's Gremlins??? brunnhilde-diagnostics-20170731-1715.zip Edit: Looks like maybe this was caused by a dropped connection to the UD drive I use for the backups connected via USB. Noticed it wasn't shown in Main and cycled the power to the UD drive to get it mounted again. Checked CA Backup settings and saw that destination was set as RecycleBin. Reconfigured the settings and backups seem to be running ok now.

Got an error on last nights backup- Event: Community Applications Subject: appData Backup Description: Backup of appData complete - Errors occurred Importance: warning Error in file I/O Not sure what this means? Wanted to attach diagnostics but can't connect to my home network. My guess is that the OpenVPN docker didn't get restarted. Looks like Plex is also still shutdown. Can't check the rest remotely.

Here's the instructions I used- https://github.com/Jackett/Jackett/wiki/Finding-cookies

I see yoda too. 6.3.5 and Safari.

Update resolved the issue for me.

Seeing the same issue here. ControlR plugin vs 2.1.0 unRAID vs 6.3.5

Scroll to the bottom of that page and you should see the trim schedule settings.

It was actually an issue with Privoxy. Not sure what the proper setting for proxies is in Deluge, but setting proxies to "none" fixed the problem.

@methanoid Not sure that's true. I can't see it at all.

It means that when the name of the drive is changed it may drop out of the array. You would have to stop the array and re-assign the disk. Data loss shouldn't be an issue. It's all still in the drive, just not accessible until you add the drive back into the array. Probably a good idea to be sure you first have a list of the drive serial numbers and which array assignment they have (diskX, cache, parity, etc). Especially for the parity drive(s).

You're right. I went ahead and set it up in Radarr and it works. Not sure what the website registration credentials are for. Thanks.

Just took a quick look, but that appears to be "invitation only" as well.

Thanks. Couldn't find any public indexers. Everything I checked was invitation only except IP Torrents. Guess I'll take a look at Jackett.

Got this docker running using @gridrunner video without any problems, except one. Can't add any torrent indexers. When I try adding IP Torrents I get a no response error. Posted on the Radarr forum on reddit and they claim that indexers can't be used with Radarr??? Hard for me to believe that. Maybe someone could confirm if this is true?

I must be blind.? My wife claims I can't ever see anything if it's right in front of me. Maybe she's right.

Where is the debug variable? I've been trying to find it but don't see it in the template.

Sounds right that I would get this error repeatedly? So I should just let them sit in the que and they'll eventually download?

I know this isn't really a docker issue but could use some advice regarding where to seek help. I'm trying to get Radarr working with an Indexer (IPTorrents) and no problems there but as soon as a torrent gets added to the que, in Deluge, the download fails with a tracker error "error- operation cancelled". Only happens with IPTorrents. Torrents from other sites work fine. Contacted IPTorrents, they claim it's because I'm using VPN (doesn't everybody?). Posted in the Deluge forum. They claim the tracker sites are overloaded. I tried probably something like 20 torrents for as much as 24 hours. Is this really normal behavior? Could use some advice on where to seek help with this? Is there anyway to get a better idea of the error? Deluged.log doesn't show anything other than that the torrent was added.

How can I check what version of python is installed with this docker?

Worked. Thanks.

So add something like plex_movies_2 mapped to /mnt/user/Media/XBMC/Movies/ And then add plex_movies_2 as a second "movies" folder in Plex?

Trying to add a second folder for plex_movies. The gothic readme shows a comma separated list so I used- /mnt/user/Media/XBMC/Torrents/,/mnt/user/Media/XBMC/Movies/ This isn't working though. Plex is only picking up files from the Movies folder. A syntax error maybe?

I just checked on my iPhone 7. Didn't see this issue. That suggests to me that it's possibly an issue with your configuration.

OpenVPN-AS is a server. It allows you to connect to your home network securely from the internet. I don't think it has any blocking capabilities for connections initiated from inside your local network. I know I don't have any trouble connecting to YouTube when I have the vpn client active on my iPhone.