trurl
-
Posts
44,363 -
Joined
-
Last visited
-
Days Won
137
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Everything posted by trurl
-
There is no Disk Utilities under Tools. Where are you seeing that? File Activity is under Tools - System Information just as it says in the first post of this thread. -
Create a cache-only share for the logs.
-
Looked like connection problems. During rebuild on Main - Array Devices, you should see lots of writes to the rebuilding disk, lots of reads from all other disks, and no errors from any disk.
-
To rebuild to same disk Stop array Unassign disabled disk Start array with disabled disk unassigned Stop array Reassign disabled disk Start array to begin rebuild
-
Do you have other browsers or tabs open to your server on any computer or mobile device?
-
How is this disk connected?
-
Still having connection problems on disk3. Be sure to check power as well as SATA connection, both ends, and including splitters.
-
-
For some reason your disk3 was shown in the smart folder of the diagnostics as unassigned so that is why I asked for the screenshot. SMART for all mentioned disks (parity,disk3,14,15) looks OK, didn't look at the others. Do any disks have SMART warnings on the Dashboard page? I recommend dual parity for that many disks. Disk3 has to be rebuilt of course. Do you know how to proceed?
-
Not really obvious. Is there something specific not already anonymized in the diagnostics that you think needs to be anonymized?
-
Post a screenshot of Main - Array Devices.
-
Why do you think that? If you are transferring between disks on the server, only the source and destination disks are involved (and possibly parity. So if your source or your destination is cache, then of course cache is involved. Otherwise, the only way cache might be involved is if your destination is a cache-yes or cache-prefer user share. And you MUST NOT mix disks and user shares when moving or copying files.
-
You should install all plugins and dockers from the Apps page, but to get the Apps page you have to install the Community Applications plugin on the page in your screenshot.
-
Go to Tools-Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. You run memtest from the Unraid boot menu
-
This just out:
-
Your docker templates are on flash. The Previous Apps feature on the Apps page will reinstall any of your dockers exactly as they were.
-
Do you have ECC RAM? If not, have you done memtest? Also:
-
You still didn't do this right: Some people have had success with this: https://www.ufsexplorer.com/ I have no experience with it but the website says it support btrfs.
-
And I recommend not sharing cache on the network, because as noted, cache is a disk included in user shares and so subject to all the problems already mentioned. Only User Shares and Unassigned Devices should be accessible over the network.
-
Setting up a file share server to be accessed over the internet
trurl replied to BTPBen's topic in Pre-Sales Support
Throw remote networking into this picture and VM performance is likely to be a minor problem. -
You mention changing cache but you don't say whether cache is involved in the transfer and what is source or destination.
-
Your LAN IP may start with 10, but that is not what you want and that wouldn't be useful It is the WAN IP of your router that you need, and it is probably working correctly. You just need to figure out what to do next to forward ports to your servers LAN IP. If you don't understand this you need to step back before you expose your server to hack attacks on the internet.
-
Go to Tools-diagnostics and attach the complete Diagnostics ZIP file to your NEXT post
-
Diagnostics would tell us more. Tools - Diagnostics, attach complete ZIP to your NEXT post.
-
If your current flash is working I would just keep it. The SSD needs replacing of course and didn't have much capacity anyway. Upsize the disks one at a time starting with parity and as you need capacity.
