Can0n

thanks...I hadn't heard about a Unifi Protect docker file yet anywhere on the ubnt forums...maybe i missed it. thanks for getting back to me. looking forward to some updates...the 3.9.7 has been giving me some grief

Hello @Pducharme I was wondering if the Unifi Video Beta repository will update anytime soon? im using the beta tag and still see only 3.9.7 and 3.9.8 beta 3 is already out for a while now. Also wondering with the Unifi team working to replace Video with a new app called Protect if you are planning on working on a docker for that? the beta is available as well

Main server for Plex has 32GB DDR4 (I transcode to ram to save on the wear and tear of my dual 1TB SSD's My reverse proxy server and VM host has 50GB currently (more on the way) of DDR3 ECC memory

I think I have found mine crashes with two or more vm’s running I don’t get why though I have 24 threads and 50GB ram my fedora reverse proxy gets 8 threads and 20GB ram and my windows 10 gets 4 different threads and 8GB ram that leave plenty of threads and ram for unraid i had a full two days uptime when I booted my windows 10 VM for the first time in a week then had one unraid crash followed by a full on hard freeze of the server about 50% of way doing parity check. I even installed handbrake and encoded a 10GB 1080p video to 720p which taxed the cpus hard and no lock ups so hoping it was just that ram I checked ky server logs from the BMC/IPMI card and saw yet another ram module failing (that’s now two 4GB modules). I have new ram ram and two faster cpus on the way can’t wait to see if that helps.

hello @binhex I recently started locking down my network a little tighter and started with IDS (Intrusion Detection Service) I had this enabled for about a week when i noticed an alert last night they docker container was calling "home" to a French IP in France. it was polling the docker contain on port 51094 and was trying to relay on port 80 to 94.23.9.xxx the attack was labeled as a Network Trojan, my vendor is Ubiquiti and there is a lot of people saying that Network Trojan could be a false positive I am wondering if you know of any part of your docker contain that would call home to that IP? it only happened once so far if you PM me I could give you screenshot of the detailed attack and offending IP

one of my servers has also been crashing about once every two days or so attached is my latest diagnostics the last crash was about 2 hours ago at the time of this posting it always seems to do this late at night so not sure where the failure could be....I know there is an updated BIOS but have not loaded it yet for lack of time.....its been stable for a long time until recently, the only change is a bad stick of ram the BIOS logs were getting full (Acer AR380 R2 2U server with IPMI) i pulled that stick and it seemed to run better for a short while but for last month its stating unclean shut down detected and runs a parity check. Server logs in IPMI show no shutdowns or reboots this is not appearing to be a hardware issue at least not one that the IPMI module monitors my other server is pretty stable... the one crashing hosts the following VM's DNS ad blocker (ubunutu and Pihole), Fedora reverse proxy and a windows 10 vm so its kind of important hoping these diagnostics can help sif-diagnostics-20180809-0752.zip

I have done this using my i7 server in my signature more than a few times to upgrade disk sizes and replace failing drives my server is chock full of 5/6 and 8TB drives with two 1TB SSD sitting between the motherboard and fan wall. just replaced one tonight and unraid wouldnt see the new drive at all until i rebooted. this is first time it did that it usually detects the replacement drive and when i start the array it starts rebuild.....approx 17hrs for 8TB drive to rebuild

yup latest one is fixed. thanks again Binhex love your docker containers

check the docker hub see a 4hr old version 1.4.8-1-01 maybe its fixed now. I test and post

i posted this in the plexpass support as well as its same problem with binehex's more recent update to plexpass. i think binhex is playing with new code and its not playing well with unraid 6.x

@binhex latest update to hydra2 has same issue as last plex pass issue it wont start with unknown directory chown: cannot access '/var/lib/nzbhydra2': No such file or directory went to previous version 1.4.7-1-01 to fix

@binhex dockerhub sucks for being so slow but thank you again its done an im updated and its working

thanks worked for me too...but i see the latest build is "building" docker hub so thats what im going to load now ***EDIT doh that didnt work it went to current broken one...the final portion is building....should be long now

been a few minutes on the first of the two files not sure how long the average build is for this container.

we has building!!!!!!

@binhex any idea why your new build is over 2 hours in the queue?? i havent seen builds that this long before.

My plex is for my family and our home, getting lots of texts. told them im waiting on a computer to compile code. they don't understand but I'm wondering why docker hub is so slow right now??? i did a reverse proxy docker and took like 30 seconds to compile

2 hours in queue

you sir are amazing!

its coming soon i see the git was updated 11minutes ago

awesome thanks @binhex

@binhex just updated to latest docker container and it broke the container 2018-03-14 14:57:42.026906 [info] Host is running unRAID2018-03-14 14:57:42.043348 [info] System information Linux fec44d76d35a 4.14.16-unRAID #1 SMP PREEMPT Wed Jan 31 08:51:39 PST 2018 x86_64 GNU/Linux2018-03-14 14:57:42.062017 [info] PUID defined as '99'2018-03-14 14:57:42.081365 [info] PGID defined as '100'2018-03-14 14:57:42.413131 [info] UMASK defined as '000'2018-03-14 14:57:42.432560 [info] Permissions already set for volume mappings2018-03-14 14:57:42.450447 [info] TRANS_DIR defined as '/config/transcode'chown: cannot access '/opt/plexmediaserver/': No such file or directory

Hello @theone I was wondering if you can add a feature to remap the tray number....I have a supermicro 12 bay case and the layout is from bottom left to top right bays 0-11 putting the map as 1-12 as we read books doesnt work at all for me and presumably others. we should be able to edit the bay numbers to match our systems...if thats possible?

you now need to log into your cameras directly and upload the previous firmware once done the cameras will re-adopt without issue.

so I load the Unifi Video docker, create my user then i just get invalid username and password when it asks me to login, i even tried the default ubnt/ubnt any ideas guys