doremi

Thanks @itimpi, issue fixed after power issue resolved.

I'll replace the cables this week and try again.

I am seeing lots of ATA errors while running mover from array to cache (on a new pair of SSDs). I haven't replaced the cables yet as I have only hot swapped the old SSDs with these new ones. Any help appreciated. Jun 30 14:17:30 UnRAID emhttpd: shcmd (1799): /usr/local/sbin/mover start &> /dev/null & Jun 30 14:17:35 UnRAID kernel: ata3.00: exception Emask 0x10 SAct 0xf00000 SErr 0x4890000 action 0xe frozen Jun 30 14:17:35 UnRAID kernel: ata3.00: irq_stat 0x08400040, interface fatal error, connection status changed Jun 30 14:17:35 UnRAID kernel: ata3: SError: { PHYRdyChg 10B8B LinkSeq DevExch } Jun 30 14:17:35 UnRAID kernel: ata3.00: failed command: WRITE FPDMA QUEUED Jun 30 14:17:35 UnRAID kernel: ata3.00: cmd 61/40:a0:00:60:20/05:00:00:00:00/40 tag 20 ncq dma 688128 out Jun 30 14:17:35 UnRAID kernel: res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) Jun 30 14:17:35 UnRAID kernel: ata3.00: status: { DRDY } Jun 30 14:17:35 UnRAID kernel: ata3.00: failed command: WRITE FPDMA QUEUED Jun 30 14:17:35 UnRAID kernel: ata3.00: cmd 61/c0:a8:40:65:20/02:00:00:00:00/40 tag 21 ncq dma 360448 out Jun 30 14:17:35 UnRAID kernel: res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) Jun 30 14:17:35 UnRAID kernel: ata3.00: status: { DRDY } Jun 30 14:17:35 UnRAID kernel: ata3.00: failed command: WRITE FPDMA QUEUED Jun 30 14:17:35 UnRAID kernel: ata3.00: cmd 61/40:b0:00:68:20/05:00:00:00:00/40 tag 22 ncq dma 688128 out Jun 30 14:17:35 UnRAID kernel: res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) Jun 30 14:17:35 UnRAID kernel: ata3.00: status: { DRDY } Jun 30 14:17:35 UnRAID kernel: ata3.00: failed command: WRITE FPDMA QUEUED Jun 30 14:17:35 UnRAID kernel: ata3.00: cmd 61/c0:b8:40:6d:20/02:00:00:00:00/40 tag 23 ncq dma 360448 out Jun 30 14:17:35 UnRAID kernel: res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error) Jun 30 14:17:35 UnRAID kernel: ata3.00: status: { DRDY } Jun 30 14:17:35 UnRAID kernel: ata3: hard resetting link Jun 30 14:17:35 UnRAID kernel: ata4.00: exception Emask 0x10 SAct 0x78000 SErr 0x4890000 action 0xe frozen Jun 30 14:17:35 UnRAID kernel: ata4.00: irq_stat 0x08400040, interface fatal error, connection status changed Jun 30 14:17:35 UnRAID kernel: ata4: SError: { PHYRdyChg 10B8B LinkSeq DevExch } Jun 30 14:17:35 UnRAID kernel: ata4.00: failed command: WRITE FPDMA QUEUED unraid-diagnostics-20250630-1606.zip

Is your unraid host already listening on port 80?

Use community 12.1

What a champ! Thanks very much.

Guys, need some assistance please as I am stuck. My current set up is as follows: parity - 8TB disk1 - 8TB disk2 - 4TB disk3 - 4TB I have followed the "Safer Method" instructions in here to copy my files from disk2 to disk1 - with the intention of decommissioning disk2. I then tried to use Tools > New Config after removing disk2. My question is: 1. What option do I use under Tools > New Config? I tried None. However, this reset all drive assignment. When I tried to put the parity disk back. the GUI complained that all data would be lost. Henceforth, I renamed /boot/config/super.old to /boot/config/super.dat to restore everything back the way it was. Currently, I have started the array in maintenance mode and let parity check run. Not sure how else to progress and decommission disk2. As a final stage, I would like to change disk3 to disk2. However, I understand I can't make too many disk changes with one parity drive.

Try logging out of myServers (top right hand corner). That worked for me. 32GB

Surprisingly, I can now back up my flash drive AFTER logging out of myServers. The backup was successful on Firefox (adblock), Safari (no adblock) and Chrome (adblock) with network blocking enabled. Not sure why disabling myServers fixed my issue.

Yes, I do. Having said that, I have just tested the back up process again by disabling my network adblocker and removing all adblock plugins from one browser (safari). Unfortunately, the backup process was still timing out. Aug 20 13:36:31 UnRAID nginx: 2021/08/20 13:36:31 [error] 8704#8704: *7537943 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.1.114, server: , request: "POST /webGui/include/Download.php HTTP/2.0", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "a189c36bfe0d768a7142e859974ff75f2fcf51ec.unraid.net", referrer: "https://a189c36bfe0d768a7142e859974ff75f2fcf51ec.unraid.net/Main/Flash?name=flash" Not sure if it's related. I noticed "invalid API key" message from myServersError when I enabled web inspector on safari.

I only have 16GB ECC RAM. I can't back up my Flash drive using Firefox, Chrome or Safari.

Has this issue been resolved? I also can't seem to backup my flash drive via the GUI.

Is the official "unraid-api" the same as ElectricBrainUK's "unraid api"? I can't find this info after doing multiple searches.

Apparently TMDB is down?

Don't mean to be rude but should this container be in CA? I think this container is too difficult to configure as there are too many dependencies missing that require manual intervention.

What's the best way to use XBMC type client like Kodi? Thought it was Kodi-headless? Sorry if it's a silly question as I can't seem to get my head around this.

Hey guys, I have spent a few hours trying to configure Kodi headless but can't seem to see any results for Add-Ons. Have configured advancedsettings.xml but not sources.xml. Essentially, I want to use the PlexKodi add-on and let Plex handle my Music/Video Libraries. Can anyone advise how to get the Add-Ons to work ?

Hi guys, I keep seeing these errors during cert renewal even though the certs are renewed successfully. cronjob running on Mon Sep 4 16:07:17 AEST 2017 Running certbot renew Saving debug log to /var/log/letsencrypt/letsencrypt.log ------------------------------------------------------------------------------- Processing /etc/letsencrypt/renewal/www.XXX.com.conf ------------------------------------------------------------------------------- Cert is due for renewal, auto-renewing... Running pre-hook command: s6-svc -d /var/run/s6/services/nginx Hook command "s6-svc -d /var/run/s6/services/nginx" returned error code 111 Error output from s6-svc: s6-svc: fatal: unable to control /var/run/s6/services/nginx: No such file or directory ------------------------------------------------------------------------------- new certificate deployed without reload, fullchain is /etc/letsencrypt/live/www.XXX.com/fullchain.pem ------------------------------------------------------------------------------- Congratulations, all renewals succeeded. The following certs have been renewed: Has anyone encountered these before and what's the resolution please? Cheers.

@lastOne @binhex @Dagarth FYI, my issue seems to be resolved on the last update.

I also seem to have the same problem as dagarth. rtorrent runs if I log in to the docker and run it manually via the CLI.