casperse

Members
  • Posts

    610
  • Joined

  • Last visited

Everything posted by casperse

  1. Finally I found this under the "3 dots" under /config/hardware on the HA UI The path was: "path": "/dev/serial/by-id/usb-QEMU_QEMU_USB_SERIAL_1-0000:00:07.0-4-if00-port0" Thanks everything is up and running and I can get everyone off my back LOL Have a great weekend, you saved mine! Cheers
  2. Great reading the guide I did add the XML input manually SORRY Everything is now removed: So everything should now finally be okay on the Unraid and XML part! But for some reason I still get the in HA Might be a stupid Q but how can I validate the path in HA? { "entry_id": "2bb51ca17b7fa61b8d997ce1d3f2c8a2", "version": 3, "domain": "zha", "title": "ConBee II, s/n: DE2421314 - dresden elektronik ingenieurtechnik GmbH", "data": { "device": { "path": "/dev/serial/by-id/usb-QEMU_QEMU_USB_SERIAL_1-0000:00:07.7-4-if00-port0" }, "radio_type": "deconz" }, Again your help is much appreciated without ZigBee most of the smart house doesn't work - so I am not that popular at home right now LOL
  3. Yes it seem i have this error: But I have changed the XML looking in the XML I now have to entries? like someone here also experienced What should I do... both here are port 4 should I just change one to something else? Again thanks for helping, been at this all day ๐Ÿ˜ž
  4. THANKS! SO MUCH - I enabled the Conbee II as a serial and it seem to work now! My only problem now is that I don't know the correct path in the HA VM anymore? I know this is kind of off-topic but do you know how to define/find the new USB path in HA? { "entry_id": "2bb51ca17b7fa61b8d997ce1d3f2c8a2", "version": 3, "domain": "zha", "title": "ConBee II, s/n: DE2421314 - dresden elektronik ingenieurtechnik GmbH", "data": { "device": { "path": "/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2421314-if00" }, "radio_type": "deconz" },
  5. Hi Again ๐Ÿ™‚ I had many problems attaching the CONBE II stick to my VM running Home assistant And I reverted to use your great plugin for this, but for some reason I keep getting this error: Some think strange the USB for both is using 04? Any input to what I can try, would be much appreciated
  6. I ended up reverting to the last Docker backup......
  7. Hi All I am running latest plex docker: plexinc/pms-docker - Docker Image | Docker Hub After updating I cant start Plex I get : Preparing to unpack /tmp/plexmediaserver.deb ... PlexMediaServer install: Pre-installation Validation. PlexMediaServer install: Docker detected. Preinstallation validation not required. Unpacking plexmediaserver (1.29.0.6219-b1b4d4871) ... Setting up plexmediaserver (1.29.0.6219-b1b4d4871) ... PlexMediaServer install: Docker detected. Postinstallation tasks not required. Continuing. [cont-init.d] 50-plex-update: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. Starting Plex Media Server. Sqlite3: Sleeping for 200ms to retry busy DB. Critical: libusb_init failed found this but don't know what version to do a roolback to? New PUBLIC PMS Version Available - 1.28.2.6151-914ddd2b3 : PleX (reddit.com) Anyone who knows how to fix this? It all started with this, when trying to open the Plex webservice This XML file does not appear to have any style information associated with it. The document tree is shown below. <Response code="503" title="Maintenance" status="PMS is currently running startup maintenance tasks."/>
  8. Did the latest update and everything is working something must have changed and caused this...
  9. I just got the same? Also I can see that my dockers using the Proxynet config in Unraid is offline? I am running unraid v. 6.10.3rc1
  10. Anyone - do you have keyboard layout working remotely as US/UK and are you able to write @ with the "action" + 2 I have tried multiple options and sofar no luck? Have you VM template as US vnc default? or have you changed it to native country? (If you got this working) ๐Ÿ™‚
  11. I think I got it working except one thing, and its driving me crazy! I have the keyboard setup in VM as VNC DK And in the macinabox I have the: And I have the mapping: Also I am using the Splashtop as remote desktop Tried both options: How do I get the "@" working the "Alt +2" does not work? I have read multiple solutions but no one works?
  12. Ok I think I got this but how to selct which platform? (Is it your native Unraid platform? or the HW used on the Synology?) Version : 0.8.0.3 -------------------------------------------------------------------------------- -------- Available platform versions: -------------------------------------------------------------------------------- -------- apollolake-7.0-41890 apollolake-7.0.1-42218 apollolake-7.0.1-42218-JUN apollolake-7.1.0-42621 apollolake-7.1.0-42661 broadwell-7.0.1-42218 broadwell-7.0.1-42218-JUN broadwell-7.1.0-42621 broadwell-7.1.0-42661 broadwellnk-7.0.1-42218 broadwellnk-7.0.1-42218-JUN broadwellnk-7.1.0-42621 broadwellnk-7.1.0-42661 bromolow-7.0.1-42218 bromolow-7.0.1-42218-JUN bromolow-7.1.0-42621 bromolow-7.1.0-42661 denverton-7.0.1-42218 denverton-7.0.1-42218-JUN denverton-7.1.0-42621 denverton-7.1.0-42661 geminilake-7.0.1-42218 geminilake-7.0.1-42218-JUN geminilake-7.1.0-42621 geminilake-7.1.0-42661 v1000-7.0.1-42218 v1000-7.0.1-42218-JUN v1000-7.1.0-42621 v1000-7.1.0-42661 -------------------------------------------------------------------------------- Sorry I have tried to google this but information is not that avaible on this topic ๐Ÿ™‚
  13. Ok so I got the SSH working to the redpill image: So I need to create the user_config.json file here ? - before installing any DSM? https://github.com/pocopico/tinycore-redpill/blob/main/user_config.json
  14. Does anyone know how to set the serial in the configuration? (I don't want to generate one, I want to use the serial I have for my old Synology NAS, replacing the one I have)
  15. Seem to be some access problem?
  16. Sorry is still a RC right? did I post it the wrong place? I actually just want to remove the user share? Isn't this possible? (I know you normally have to empty the share) but since this is my secound cache drive I would really just like to remove it quickly (Really don't want my cache drive showing up on the network as a shared folder ๐Ÿ™‚) UPDATE: I went through all my drives (Terminal mc) looking for any reference to a user share folder on ech of my disks with the same name as the cache_drive and deleted them (All was empty) and now I don't have any shared user drive anymore ๐Ÿ™‚ I also found that the power was cut during last night so this might have caused this problem? Anyway I hope that when I do my next reboot that the share doesn't pop up again!
  17. Disk shares is fine, but this is showing up as a user share!
  18. If I stop the server. IS there a share conf. file where I can delete the share without having to empty the folder? Which I can not do since its my cache drive for my appdata
  19. Hi All After the last update my second cache drive is showing up as a shared drive? This "share" contains all my cache appdata - so how can I remove it?
  20. I tried the community app but I am having some problems? Uploading files does not get uploaded to the files folder? Also windows share shows the folder strange? "M6U1...." Also changing the port number breaks the "open webui" on the Unraid docker menu (But thats a smaller problem)
  21. I couldn't have done this without the help from ghost82! And the great Unraid forum with the many great post sharing everyone's old and new VM creation solutions Only have two things that I didn't find out /re-solved: Changing VM settings from "Both" to "Multifunction" would remove all my drives after reboot every time! (Only setting it back to "Both" would resolve it after a new reboot) - Scary stuff! (Maybe by design?) But selecting a GPU in the dropdown list during a VM 11 creation with passthrough WITHOUT first doing the "Bind selected to VFIO at Boot" for the GPU - in the device settings would crash the entire Unraid UI every time (Only SSH would work after that)
  22. Hi Finally it works! (It is still a mystery why all my drives would disappear every time I tried to change my VM settings to multifunction?) Trying to re-cap what I ended up doing: Anyway I got passthrough working with "pc-i440fx-6.2" And the changes to VM settings to "allow unsafe interrupts" Also I did use the VBIOS dump with the HEX edited part not the full dump. Also think the removal of the "pci=nommconf" did have something to do with the problem and of course the added lines in the XML: <features> <acpi/> <apic/> <hyperv mode='custom'> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='1234567890ab'/> </hyperv> <kvm> <hidden state='on'/> </kvm> <vmport state='off'/> <ioapic driver='kvm'/> </features> So my final XML file like this, working and pretty quick boot! : <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 11 - GAMERVMPC</name> <uuid>58ffcf6c-1a1d-63a5-7524-3283f15d131b</uuid> <description>Windows 11 Pro 64 DK GAMERPC</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 11" icon="windows11.png" os="windowstpm"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='2'/> <vcpupin vcpu='1' cpuset='8'/> <vcpupin vcpu='2' cpuset='3'/> <vcpupin vcpu='3' cpuset='9'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='10'/> <vcpupin vcpu='6' cpuset='5'/> <vcpupin vcpu='7' cpuset='11'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-6.2'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi-tpm.fd</loader> <nvram>/etc/libvirt/qemu/nvram/58ffcf6c-1a1d-63a5-7524-3283f15d131b_VARS-pure-efi-tpm.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv mode='custom'> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='1234567890ab'/> </hyperv> <kvm> <hidden state='on'/> </kvm> <vmport state='off'/> <ioapic driver='kvm'/> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='4' threads='2'/> <cache mode='passthrough'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='writeback'/> <source file='/mnt/cache_shares/game-server/vdisk.qcow2'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Win11_Danish_x64v1.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.217-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='pci' index='1' model='pci-bridge'> <model name='pci-bridge'/> <target chassisNr='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </controller> <controller type='pci' index='2' model='pci-bridge'> <model name='pci-bridge'/> <target chassisNr='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </controller> <controller type='pci' index='3' model='pci-bridge'> <model name='pci-bridge'/> <target chassisNr='3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </controller> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:f9:6f:ba'/> <source bridge='br0'/> <model type='virtio-net'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <tpm model='tpm-tis'> <backend type='emulator' version='2.0' persistent_state='yes'/> </tpm> <audio id='1' type='none'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </source> <rom file='/mnt/cache_shares/game-server/Bios_dumps/ASUS_DUAL_RTX3060_FIXED.rom'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x01' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x03' slot='0x01' function='0x1'/> </hostdev> <memballoon model='none'/> </devices> </domain> I tried getting a 3Dmark benchmark but this wouldn't work on my VM Even with these changes it didn't work (Someone reported this as a fix) <hyperv mode='custom'> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='1234567890ab'/> <vpindex state='on'/> <runtime state='on'/> <synic state='on'/> <stimer state='on'> <direct state='on'/> </stimer> <reset state='on'/> <frequencies state='on'/> <reenlightenment state='on'/> <tlbflush state='on'/> <ipi state='on'/> <evmcs state='on'/> </hyperv> BIG THANKS TO @ghost82 - I would never have gotten this to work without you! (Hope this will help others ๐Ÿ™‚ tried to document the changes I did)
  23. I removed the pci=nommconf from the startup (I think this was part of my pfsense NIC passthrough guide?) After setting the VM to multifunction all my drives was gone when rebooting! Scary stuff Fortunately changing it back to "Both" and rebooting the drives was back again! I did get the unsafe interrupts enabled! So I am back to testing passthrough again, hooping the removal of the "pci=nommconf" might have fixed it? Booting now
  24. 1. unraid gui freezes when you launch the windows 11 gamer vm, but apart the gui it's working since you can ssh into it Yes I found that if I added the GPU to the VM it would freeze the entire Unraid UI only SSH would giive access But I now know that this only happens if I didn't do the "Bind selected IOMMU groups to VFIO at boot" (Still think that it should be possible to accidently do this without a total freeze ๐Ÿ™ƒ) 2. your 3060 gpu doesn't work inside the vm Yes it seems that no matter what I do I cant get the rxt3060 to passthrough? 1. dump your vbios and use it I have done that using the GPU-Z.2.46.0 - moving the card to a desktop I also did a fixed VBIOS removing the top with a hexeditor like some suggest (Tried booting with both VBIOS) 2. Use q35 machine type instead of i440fx I just created a new Win 11 using Q35 (I couldnt change the existing VM I got this error: So I created a new VM with Q35 <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='15'> <name>Windows 11</name> <uuid>15c7fb89-8be2-5ae0-4c84-150ebba46f87</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 11" icon="windows11.png" os="windowstpm"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='2'/> <vcpupin vcpu='1' cpuset='8'/> <vcpupin vcpu='2' cpuset='3'/> <vcpupin vcpu='3' cpuset='9'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='10'/> <vcpupin vcpu='6' cpuset='5'/> <vcpupin vcpu='7' cpuset='11'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-6.2'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi-tpm.fd</loader> <nvram>/etc/libvirt/qemu/nvram/15c7fb89-8be2-5ae0-4c84-150ebba46f87_VARS-pure-efi-tpm.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv mode='custom'> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='1234567890ab'/> </hyperv> <kvm> <hidden state='on'/> </kvm> <vmport state='off'/> <ioapic driver='kvm'/> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='4' threads='2'/> <cache mode='passthrough'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.217-1.iso' index='2'/> <backingStore/> <target dev='hdb' bus='sata'/> <readonly/> <alias name='sata0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='writeback'/> <source file='/mnt/cache_shares/game-server/vdisk.qcow2' index='1'/> <backingStore/> <target dev='hdc' bus='sata'/> <boot order='1'/> <alias name='sata0-0-2'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x8'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x9'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:f9:6f:ba'/> <source bridge='br0'/> <target dev='vnet20'/> <model type='virtio-net'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/5'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/5'> <source path='/dev/pts/5'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-15-Windows 11/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='connected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <tpm model='tpm-tis'> <backend type='emulator' version='2.0' persistent_state='yes'/> <alias name='tpm0'/> </tpm> <audio id='1' type='none'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </source> <alias name='hostdev0'/> <rom file='/mnt/cache_shares/game-server/Bios_dumps/ASUS_DUAL_RTX3060_FIXED.rom'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x1'/> </source> <alias name='hostdev1'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </hostdev> <memballoon model='none'/> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain> After booting and I have the 3060 card set: Windows 11 starts up and I don't have any card in the device manager anymore? 3. Change layout of target gpu as multifunction (audio+video): same bus, same slot, different function with addition of multifunction='on' at the and of the '<address type' line of the video block. Not sure what you mean? should I change the way the IMMOU is split here? To use multifunction? I am thinking that maybe the Bios dump is wrong? Or the VFIO is wrong? should I input the GPU ID's here during boot? Should I do a NEW: kernel /bzimage append vfio-pci.ids=10de:2487,10de:228b pcie_acs_override=downstream,multifunction initrd=/bzroot,/bzroot-gui pci=nommconf Thanks again for helping! (I have been troubleshooting this for over a week now!)
  25. Attach vfio like this: Yes GPU + Audio like this: And the SSH diagnostic attached below And my XML file: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 11 GAMER-VM-PC</name> <uuid>f29f275c-5941-8a32-f3de-fb21812cbab9</uuid> <description>Windows 11 Pro 64 DK GAMERPC</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 11" icon="windows11.png" os="windowstpm"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='2'/> <vcpupin vcpu='1' cpuset='8'/> <vcpupin vcpu='2' cpuset='3'/> <vcpupin vcpu='3' cpuset='9'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='10'/> <vcpupin vcpu='6' cpuset='5'/> <vcpupin vcpu='7' cpuset='11'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-6.2'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi-tpm.fd</loader> <nvram>/etc/libvirt/qemu/nvram/f29f275c-5941-8a32-f3de-fb21812cbab9_VARS-pure-efi-tpm.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv mode='custom'> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='2D77A8B352F1'/> </hyperv> <kvm> <hidden state='on'/> </kvm> <vmport state='off'/> <ioapic driver='kvm'/> </features> <cpu mode='host-passthrough' check='partial' migratable='on'> <topology sockets='1' dies='1' cores='4' threads='2'/> <cache mode='passthrough'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='writeback'/> <source file='/mnt/cache_shares/game-server/vdisk.qcow2'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Win11_Danish_x64v1.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.217-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:f9:6f:ba'/> <source bridge='br0'/> <model type='virtio-net'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <tpm model='tpm-tis'> <backend type='emulator' version='2.0' persistent_state='yes'/> </tpm> <audio id='1' type='none'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </source> <rom file='/mnt/cache_shares/game-server/Bios_dumps/ASUS_DUAL_RTX3060_FIXED.rom'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </memballoon> </devices> </domain> Thanks for reaching out! - I have tried so many things! ๐Ÿ™‚ plexzone-diagnostics-20220514-2250.zip