casperse
-
Posts
810 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by casperse
-
-
What a great new development!
Would it be possible to "clone" the existing docker for Plex and configure this with a new P2000 card?
(I just got the IGPs working! and I would love to do some benchmarking comparing the IGP with the P2000, quality and speed)
Example: (Pointing to the same Appdate folder
Docker 1 - Plex linuxserver (IGP)
Clone 2 - Plez linuxserver (GPU)
-
@bonienl Hi I have tried to create a small video to show you what happens.
To me it looks like the plugin is working perfectly until I press the apply button? Then everything is gone and I cant get the temp sensors back again?
Please let me know if you need any log files to investigate this
-
Hi All
I love this Clear plugin, the only thing I really miss is a queue
In the process of preclearing 36 drives and that would be such a nice thing to have
Sorry I didn't find a special feature request topic, if there is one then please move this post
Thanks again for a great plugin
-
Okay I have to see how that impacts the CPU load - I can see that HW transcoding is finally working!, so only sound transcoding is needing CPU power
Strange its so high though... anyway it is working, I can access the SMB shares and play the files, I just need to type the suddirs manuall in the source.
So no biggie! - I think your right SMB layer was creating huge problems for the SHIELD TV dev. team and it took almost 6 months before the Plex servers SMB shares was working. Anyway back to refreshing the move of my Plex metadata... (Also I plan to move the media files to UnRAID that is why I have all the folders twice as smb and locally
-
31 minutes ago, CHBMB said:
Look at the forum settings, make sure signatures are switched on and you'll see a link in my sig to Docker Run Command.
That's what we need to see.
Sorry here you go:
What does the privileged setting do? Is it like setting a Higher process priority than the other Dockers?
Again thanks for your time!
-
Sorry isn't this the docker mount that I posted?
The mount is:
- Thats in the docker UI
Not sure I know what you mean?
-
Hi All
I am running the latest Linux Plex docker on the new UNRAID RC 6.7.0-rc2 2019-01-24
And I have moved my Plex data to UNRAID from my Synology (Following the normal guide)
One thing that is really strange is that all the SMB shares that I have mounted in UNRAID is working!
But I can NOT browse the shares and select the correct folder? (I saw the same problem in a early SMB setup on my Shield TV)
So to illustrate my problem adding the share on Plex I get this:
The mount is:
So I have to add the "!New" like this
Any input to why I cant browse the shares in Plex through UNRAID Docker?
I have changed the SMB shares to: RW/Slave and I can actual browse the folder in docker setup!?
As always your feedback is much appreciated!
-
Hi All
So if I already have all the openvpn files from my host vendors VPN (They use OpenVPN)
Can I set it up, using the Container Variable: VPN_PROV: custom?
And then following the great video on how to set this up
Update I get the following files from my provider:
ca.crt
credentials.conf
openvpn.ovpn
username.crt
username.key
-
Hi All
Just wanted to create this step by step if somebody else wants to fix the UNIFI USG static host record in DNS forwarder once and for all....
When following this great video created by Space invader one
Enabling Let's Encrypt under "Identification" will give you an error if you using UNIFI and you would need to create a config.gateway.json for your controller.
(Update: They still haven't created this functionality in their UI, even if its been requested since 2017 !!!)
1) you need a validated config.gateway.json file that you can place on your controller (Cloud key in my example)
2) Use WinSCP to copy the file to the folder: /srv/unifi/data/sites/[SITE CODE}/ (You can see your sitecode in your http string)
5) Reprovision your USG under: Controller Devices > USG > Config > Manage Device > Force provision.
Now when doing future updates to your UNIFI controller the config.gateway.json will keep the USG static host record in DNS forwarded
-
On 3/8/2018 at 7:22 AM, Hoopster said:To enable hardware transcoding in Plex, do the following:
Also, you need some entries in your go file like this (after entering these commands in the CLI):
#Setup drivers for hardware transcoding in Plex modprobe i915 chmod -R 777 /dev/driAnd in your Plex server Transcoder Settings page you need to enable hardware acceleration
Could you elaborate on the "Go file" entries ? where is this file located?
Also what CLI command? the above id for the "Go file" right?
I am Running the Linux Plex docker - Do I need any key's in the new version to enable Plex Pass?
Also would the release value: latest is that the same as Beta?
Sorry I have been looking for some video or dummy guide to get this working but so far no luck
As always all help is much appreciated - I am a long time Enterprise Synology user, but the freedom using UNRAID is really great!
-
3 minutes ago, dlandon said:
Any SMB or NFS share will be shared locally as an Unraid share (show in \\Tower) based on the settings in the Settings->Unassigned Devices. If you don't set up security there, then all shares will be shared public and any Windows computer can browse the shares. Based on what you are telling me, you probably want to share them hidden. That way they can't be browsed.
YES! setting the UAD/SMB as hidden did exactly what I wanted! - I am new to Unraid and now on my 29 day trial, but looks like I have to go shopping for a Pro license! - Again many Thanks for clarifying!
-
Quick Q.
I added the SMB shares using the "Add remote SMB share" because I wanted to copy files to UNRAID using some file manager and because I thought this was how I could share files to a Plex docker running on my new Unraid server?
But I just noticed that all the mounted shares are now showing up as shares on my network under Tower?
And reading the below info (Thanks)
QuoteMount Points and Shares
There seems to ba a lot of confusion over a mount point vs. a share. The mount point is where the device is mounted locally on Unraid. A share makes the mount point available in Windows at '\\Tower' as a browseable folder.
It seems I might have done this wrong? or do I create them without mounting the SMB shares (Not wanting them available in Windows share \\Tower )
Sorry if I am complicating things
love this plugin!
-
I would really like to see if I cant get the plugin to work (Havent given up yet!)
Looking into the conf. files I do have the following:
/config/plugins/dynamix.system.temp/drivers.conf
coretemp
jc42Also just tried:
jc42
/config/plugins/dynamix.system.temp/sensors.conf# sensors
chip "jc42-i2c-0-18"
label "temp1" "CPU Temp"
But I don't see any core temps anywhere?Also the dropdown fields are empty again?
Does it hide information somewhere? Because deleting the plugin and installing it again keeps the dropdowns empty
Only at the first install and me renaming the sensor from "coretemp jc42" to "jc42" I got the dropdown populated with all the sensors!
Haven't been able to get them back since?
sensors-detect
Driver `jc42':
* Bus `SMBus I801 adapter at efa0'
Busdriver `i2c_i801', I2C address 0x18
Chip `IDT TSE2004' (confidence: 5)
* Bus `SMBus I801 adapter at efa0'
Busdriver `i2c_i801', I2C address 0x1a
Chip `IDT TSE2004' (confidence: 5)Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
-
47 minutes ago, dlandon said:
Your server appears off-line to UD. The server has to respond to a ping or UD thinks it is off-line.
Feb 7 09:57:30 Tower unassigned.devices: Error: Remote SMB/NFS server '192.168.0.10' is offline and share '//192.168.0.10/TV_Shows' cannot be mounted.Be sure your remote server is configured to respond to a ping.
This is what the SMB indicator shows when the remote server is on-line.
Ok solution was to first allow ping on Unifi USG
https://help.ubnt.com/hc/en-us/articles/115003146787-UniFi-USG-Firewall-How-to-Enable-ICMP-over-WAN
And then create a FW rule on the Synology for Ping
https://www.randomhacks.co.uk/how-to-allow-incoming-pings-through-synology-firewall/
That fixed the SMB indicator!
-
So its Ping? The server is online if I write the //192.168.0.... it connects
So maybe some special FW rule to allow ping (Is this normal SMB configuration I dont have any setup like this on my other servers?)
Any way not sure what to do next, maybee its a network issue not sure Unify allows network ping by default
Again Thanks for your quick reply!
-
2 hours ago, dlandon said:
Show another screenshot of UD so I can see the mount point. Also post your diagnostics.
Surething first
Then it translate it to the IP (Nice)
And I add the mount
And the mount config file:
[//192.168.0.10/ActiveBackupforBusiness]
protocol = "SMB"
ip = "192.168.0.10"
path = "ActiveBackupforBusiness"
user = "PVR"
pass = "********"
share = "ActiveBackupforBusiness"And the Diagnostic file tower-diagnostics-20190207-1405.zip
Please let me know if I can provide any other information (and how to get it 🙂
And settings page:
-
I will post further communication in this thread:
Thanks!
-
2 hours ago, dlandon said:
Update to the latest UD plugin version 2019.02.05a. There was a bug in the previous version.
No I am already running this version 😪
-
Hi @dlandon I have tried updating everything
-
Hi
Mounting a SMB share in the new RC it now translates the Hostname to a IP (NICE this is new!)
Writing username and password provides me with the dropdown box of all my shares (Synology box)
FYI: I have enabled SMB1-2-3 on the Synology box
Sofar so god...
But I can't mount the drive?
(I don't have any problem mounting SMB to my Synology from my Shield android box, Kodi, Raspberry etc....´)
I read the FAQ, and also tried forcing it to SMB1
I have looked in the SMB file samba_mount.cfg
and it looks ok?
[//192.168.0.10/ActiveBackupforBusiness]
protocol = "SMB"
ip = "192.168.0.10"
path = "ActiveBackupforBusiness"
user = "PVR"
pass = "********"
share = "ActiveBackupforBusiness" -
@dorian can you share any light on this? I think its really strange that my Shield android box and my Kodi raspberry all connects perfectly to my Synology but for some reason Unraid dosent work.
The new release candidate change the hostname to the corresponding IP and it also find all the shares in the dropdown menu
But after adding the share its greayed out and I cannot mount the SMB path?
-
@Maor detect button just keeps writing "coretemp jc42" and shows no sencores in the dropdown menu
Changing the name to "jc42" worked for a second I could select sensors but hitting the Apply button made them all disappear again?
Same thing the first time I did a detect and then all gone?
Could be a small bug, beacuse everything was detected perfectly and then hitting Aply and it was gone
-
How did you get this working?
If I write Hostname and user and password then it will list all the shares and I can save the SMB connection.
But it will not be mounted:
If I try to use the IP address it will not list any shares I can select?
No errors in the logfile
-
Hi All
I hope this is the right place to ask this...
I got the temp working and then the probes was gone and I haven't been able to get them back?
I just got the new Gigabyte motherboard C246-WU4 supporting the new Intel’s Xeon E-2176G
and sofar its been working great with UNRAID
I have deleted the plugin and re-installed it but havent been able to get the sensors back again?
Running the command: root@Tower:~# sensors-detect got the below output.
And yes I have also tried to go through the https://wiki.unraid.net/index.php/Setting_up_CPU_and_board_temperature_sensing
but without any success.
Driver `jc42':
* Bus `SMBus I801 adapter at efa0'
Busdriver `i2c_i801', I2C address 0x18
Chip `IDT TSE2004' (confidence: 5)
* Bus `SMBus I801 adapter at efa0'
Busdriver `i2c_i801', I2C address 0x1a
Chip `IDT TSE2004' (confidence: 5)Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): yes
Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors
for initialization at boot time.
You should now start the lm_sensors service to load the required
kernel modules.Unloading i2c-dev... OK
If anyone have any input on what to do next?
Again thanks for a great plugin and this great support community its really extraordinary!
Cheers
Casperse
- Thats in the docker UI
Dynamix - System Temp
in User Customizations
Posted
Hi @trurl thanks I did try this on the official stable release and I could see the same behaviour?
The usb is working fine every other plugin I have installed also works perfectly...
tower-diagnostics-20190211-1802.zip
This is a brand new UnRAID build and I would love to see how hot it is running
Everyone's help is as always much appreciated