Brandonb1987

Having the exact same issue today. Went to bed and woke up to no VM accessibility. Tried the latest RC to see if that would fix it. It did not. help!

I figured out I was having the exact issue in this tread and followed the "delete the cache folder codecs". Now working again.

Having an issue with any form of Plex playback since the 1.28.0 update. Seems to be a transcoding issue but has something to do with a codec? No clue so I'm attaching the log file from plex itself here and posting what I see in the console while trying to playback. No settings or permissions were changed by myself that caused the issue. Has been working flawlessly since setup many years ago. Aug 03, 2022 12:13:50.687 [0x14ad17fe1b00] Error — [Req#572/Transcode] [FFMPEG] - Cannot load libcuda.so.1 Aug 03, 2022 12:13:50.694 [0x14ad17fe1b00] Error — [Req#572/Transcode] [FFMPEG] - Could not dynamically load CUDA Aug 03, 2022 12:14:03.001 [0x14ad1849cb00] Error — [Req#63b/Transcode/1CD7D580-4AD7-415F-A940-2E2274960D75/9e85868d-51ba-4eb9-bd25-29b6d9c44bd5] [eac3_eae @ 0x1528ea5bb600] error reading output Aug 03, 2022 12:14:06.000 [0x14ad1849cb00] Error — [Req#641/Transcode/1CD7D580-4AD7-415F-A940-2E2274960D75/9e85868d-51ba-4eb9-bd25-29b6d9c44bd5] [eac3_eae @ 0x1528ea5bb600] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-59fc5c1c-0190-4e62-9601-842055dac868/EasyAudioEncoder/Convert to WAV (to 8ch or less)/1CD7D580-4AD7-415F-A940-2E2274960D75_539-0-2.wav' Aug 03, 2022 12:14:06.001 [0x14ad1849cb00] Error — [Req#647/Transcode/1CD7D580-4AD7-415F-A940-2E2274960D75/9e85868d-51ba-4eb9-bd25-29b6d9c44bd5] Error while decoding stream #0:1: I/O error Plex Media Server Logs_2022-08-03_12-13-03.zip Plex Media Server Logs_2022-08-03_12-13-03.zip

Having an issue with any form of playback since the 1.28.0 update. Seems to be a transcoding issue but has something to do with a codec? Not 100% sure so I'm attaching the log file from plex itself here and posting what I see in the console while trying to playback. No settings or permissions were changed by myself that caused the issue. Has been working flawlessly since setup many years ago. Aug 03, 2022 12:13:50.687 [0x14ad17fe1b00] Error — [Req#572/Transcode] [FFMPEG] - Cannot load libcuda.so.1 Aug 03, 2022 12:13:50.694 [0x14ad17fe1b00] Error — [Req#572/Transcode] [FFMPEG] - Could not dynamically load CUDA Aug 03, 2022 12:14:03.001 [0x14ad1849cb00] Error — [Req#63b/Transcode/1CD7D580-4AD7-415F-A940-2E2274960D75/9e85868d-51ba-4eb9-bd25-29b6d9c44bd5] [eac3_eae @ 0x1528ea5bb600] error reading output Aug 03, 2022 12:14:06.000 [0x14ad1849cb00] Error — [Req#641/Transcode/1CD7D580-4AD7-415F-A940-2E2274960D75/9e85868d-51ba-4eb9-bd25-29b6d9c44bd5] [eac3_eae @ 0x1528ea5bb600] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-59fc5c1c-0190-4e62-9601-842055dac868/EasyAudioEncoder/Convert to WAV (to 8ch or less)/1CD7D580-4AD7-415F-A940-2E2274960D75_539-0-2.wav' Aug 03, 2022 12:14:06.001 [0x14ad1849cb00] Error — [Req#647/Transcode/1CD7D580-4AD7-415F-A940-2E2274960D75/9e85868d-51ba-4eb9-bd25-29b6d9c44bd5] Error while decoding stream #0:1: I/O error Plex Media Server Logs_2022-08-03_12-13-03.zip

So I have a Home Assistant VM with ZHA. I have a Sonoff Zigbee Dongle. If I plug the dongle into a usb extension cable and boot, all works fine 100%. If I plug the dongle into the exact same port on the mobo, it recognizes the dongle in the VM, but does not pass info. No devices can connect, no data flows in. Other USB ports do the exact same thing. And yes, they are all USB 3.0 and so is the extension. Another issue I can see is it will sometimes connect with Hotplug only once the VM has completely started. Ideas how to fix this? Don't even know why this would be a thing?

So I'm having the same issue. I have a Sonoff 3.0 Zigbee USB Dongle. Works 100% if I have it attached to a usb extension cable, but if I remove it from the cable and plug into the exact same port on the mobo, broken. No zigbee devices are read or able to connect. Also, it won't pass zigbee data through to the VM if I have it selected in the xml or if i hot plug the device during boot. If I let the VM come up, then hotplug, reload the integration, everything works. Thats the only way it will. Anyone got any idea what to do to fix this?

I seem to have figured it out. I set the IP address to a static config within the dhcp range and it seems to have started working.

Sorry I was going to edit the reply but you sent one first

Let me clarify. pfsense is trying to offer that option address. So it’s going though. It doesn’t show up as a leased IP address. The VM hasn’t accepted it. I cannot access home assistant vm through that address.

I can also confirm that with br0 the vm is being offered a dhcp address in pfsense.

I do not get an IP at all. It’s just blank. that’s my issue. I do not get one assigned when I select br0 but I get a 192.x.x.x if I select virtbr0

I've been pouring over everything I can find for the last several hours. I cannot seem to get my Home Assistant (fresh install) VM to pull a network address from my routers dhcp. Yes i have the network bridged and bonded. All my dockers work on br0, but if i set the VM's network to br0, i can't seem to get an IP or local access to the VM. If i set it to Virtbr0, that gives a network address but I use 10.1.10.x/24 on br0 and virtbr0 is 192.x.x.x/24. And I can't access that either through the network. Tried using hostnames, nada. What do I need to do to get this working. I use pfSense as my network dhcp/dns server.

I tried again from the dockers console. No go. Tried it in the unraid console using chown -R 1000:1000 /mnt/user/Appdata/Nodered/.npm This fixed the issue and allowed me to update the palletes.

getting an npm error in the nodered docker. When i try to update a pallet it gives me the following: I tried running the command in the console and just denies me. Any suggetions?

I never needed to open any ports before, that's the only thing I can think of that it could be.

the only thing I’ve changed was I replaced duckdns with cloudflare but I did not change anything around Deluge. Again. Works totally fine with the VPN turned off. Can access it totally fine. Soon as I re-enable the VPN, can’t see the UI. my log shows it starting everything just fine. Shows webui started, vpn connected, listening to privoxy port. that’s the only issue. So do you want 2 logs one showing with vpn off and another with on? Or just on?

I can confirm I have the exact same issue. I've been trying to fix it all week thinking it was maybe a port/dns/firewall issue. I've ruled it all out and lead me to here. Something is up with the VPN portion of PIA. I tried switching to the WireGuard implementation and it works without VPN turned on. Log shows no errors, just can't see the UI like reported.

I've been having a problem for the last 2 weeks where I cant get Sonarr to connect to Deluge. It keeps giving me the error Unknown exception: The operation has timed out.: 'http://10.1.10.3:8112/json' Anyone else encounter this issue starting about 2 weeks ago? Was working perfectly fine up until then, and because I have automatic updates enabled I wont ever know when the issue exactly started. Any logs I can post to assist in finding a solution?

No longer able to boot into GUI MODE since 6.9. Just hangs with black screen and blinking cursor. Was working fine on 6.8.3

Has anyone had issues with other non-admin users not being able to stream via chromecast? (in the last 2 weeks or so) It keeps giving everyone a "too many active streams" error when they try. It works on all apps and stuff but as soon as they try and use chromecast the error appears. I've tried deleting both their profiles multiple times, made sure nobody else is using it, etc. I just can't figure this out. I feel it may be either a container issue or there's something that isn't closing itself down properly. If I go to the Dynamix Active Stream add-on, it has a list of Plex things but they can't be halted. Anyone got any theories?

This thread shows you what to do. I implemented it and it works like a charm!

I’ve tried to do the memtest but it seems every time I try to select it, the whole system restarts and just goes back to the boot screen. Ideas?

I’m thinking it’s the marvel based HBA as everything is happening to the first 8 drives only. That HBA is likely the culprit as you say. I’m going to order an LSI card and replace them both and run the memtest as a precaution. Hopefully that will fix it.

zeus-diagnostics-20190412-2347.zip