mihcox

Members
  • Posts

    181
  • Joined

  • Last visited

Everything posted by mihcox

  1. OUT OF MEMORY ERRORS detected on my server, diagnostics attached as recommended from fix common problems tool precisionrig-diagnostics-20240306-1556.zip
  2. Even though it didnt show up, i was still able to access it with the correct ip. all is good now, thanks again
  3. This resolved the issue of them being seen by unraid, thanks for that. I can now ping the machines from each other, but i cannot find them in unassigned devices. Any suggestions for how to resolve this? They only see themselves in the unassigned devices list using smb.
  4. I just bought a couple of connect x-3 cards, MCX354A-FCBT, which report as [15b3:1003] 01:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3] in unraid, and Mellanox connect x-3 IPoIB adapter in windows. I have updated the firmwares to the latest FW Version: 2.42.5000. But i cannot seem to change them to ethernet mode. When runing mst status on windows i get No MST devices found, and when running the mstconfig -d 62:00.0 q, i get Unsupported device Any suggestions on how to resolve this? precision3450-diagnostics-20240203-0214.zip
  5. Thank you, ill look into purchasing a few of these
  6. resolved by resetting the settings from inside the gui from tower.local
  7. I am having an issue where logging in via the gui doesnt work, nor does logging in via SSH, but logging in via the console directly or via tower.local works without issue. Diagnostics attached. tower-diagnostics-20240123-1426.zip
  8. Yes, so the difference is in the machines where it is working, i have an I217-LM intel NIC as the main connection, but in the ones where its failing its an I219-LM NIC. This means it is some sort of kernel/driver issue i guess? I had purchased an x520-DA2 because it was seemed to work easily. Is there another suggestion for cheap 10GB NICs, with 1 and 2 ports?
  9. Same issue in ubuntu 20.04.3, what does that indicate? I tried that with mine, but when the server restarts it deletes the file. How are you generating it?
  10. Just installed windows on the same machine, and had no issues adding the drivers for the x520. It seems like it isnt a hardware issue, but is unraid specific as it works with windows.
  11. yes, thats probably why the one i was creating was getting deleted. Tried in both slots, x16 and x4 with the same result. Seen in the bios, and in devices, but not on the network tab. This is unfortunately not very helpful
  12. This did not help, after formatting it like the below, it was deleted after rebooting. SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="b0:4f:13:11:06:70", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="90:e2:ba:ea:71:18", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="90:e2:ba:ea:71:19", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
  13. Any suggestion on how to get them to initialize? I have the same 10gb nic working in another unraid server without issue
  14. attaching diagnosticsprecision3450-diagnostics-20240118-2301.zip
  15. Bumping this. I noticed that the server with the issue does not have a network-rules.cfg file generated while the server that is working does. Any suggestions on how to fix this?
  16. I have installed 2 10gb nics, both in different unraid servers, to try and directly connect them. My older box shows the new nics in the network panel, but the precision3450 does something different. It show the devices in system devices: But they do not show up on the network page as expected: Working computer same views:
  17. is this near expected speeds. Supermicro 846 with a collection of 4-18TB drives
  18. I found the command, but I am still seeing a downgraded rating. Any suggestions? lspci -d 1000: -vv 05:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) Subsystem: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 218 NUMA node: 0 IOMMU group: 52 Region 0: I/O ports at 6000 Region 1: Memory at dec40000 (64-bit, non-prefetchable) Region 3: Memory at dec00000 (64-bit, non-prefetchable) Expansion ROM at deb00000 [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W DevCtl: CorrErr- NonFatalErr+ FatalErr+ UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend+ LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM not supported ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 8GT/s, Width x4 (downgraded) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+ EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [a8] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [c0] MSI-X: Enable+ Count=96 Masked- Vector table: BAR=1 offset=0000e000 PBA: BAR=1 offset=0000f000 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP+ SDES- TLP- FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC+ UnsupReq+ ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [1e0 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [1c0 v1] Power Budgeting <?> Capabilities: [190 v1] Dynamic Power Allocation <?> Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Kernel driver in use: mpt3sas Kernel modules: mpt3sas
  19. I just installed a new 9300 HBA in my server. I had found a command that can be run from the command line that will output the link speed of the HBA to ensure its connection is not degraded. But i dont seem to be able to locate that forum. It helped me find out that my oboard SAS was running a degraded link, was hoping to ensure thats not the ase now Output looked something like this: # fcinfo hba-port HBA Port WWN: 10000000c6789451 OS Device Name: /dev/cfg/c2 Manufacturer: Emulex Model: LPe11000-S Firmware Version: 2.80a4 (Z3D2.80A4) FCode/BIOS Version: ......... Serial Number: ........................... Driver Name: emlxs Driver Version: 2.31o (2008.10.20.14.00) Type: unknown State: offline Supported Speeds: 1Gb 2Gb 4Gb Current Speed: not established Node WWN: ........................... HBA Port WWN: 10000000c7643890 OS Device Name: /dev/cfg/c1 Manufacturer: Emulex Model: LPe11000-S Firmware Version: 2.80a4 (Z3D2.80A4) FCode/BIOS Version: ......... Serial Number: ...................... Driver Name: emlxs Driver Version: 2.31o (2008.10.20.14.00) Type: unknown State: offline Supported Speeds: 1Gb 2Gb 4Gb Current Speed: not established Node WWN: ..............................
  20. Would another solution be to keep all my "import files" or downloads on the evocachepool ONLY, then use the my regular process to move them to the movies folder structure, then let them offload to the array?
  21. Well if that's the case then what is the solution for moving files from disk to disk on the array if the folder a file is in changes and should no longer be on the disk its currently on? Seems like this would be a commonly required script.
  22. This has never been my past experience. To go further into it, im using syncthing to copy media across to my downloads folder: Files are copied to the Downloads folder which is generally on evocachepool, but when it fills up or gets a mover run it moved these files to disk20. Those files are then imported with sonarr/radarr and are now under the /media folder: where the files are either on the evocachepool or disk 20(downloads) need to be converted to evocachepool or disk1-15 (media). This process should move any files on either the evocachepool/disk20 which were in the DOWNLOADS folder to evocachepool/disk1-15 that are now in the MEDIA folder. This process has been working without any modifications since unraid 6.7 at leasst
  23. Thats not what i'm saying is the issue. Im saying that the files that should move from disk20 -> disk1-15 are not moving with the mover, but can be manually moved with unbalance as expected. Attached are the logs from running the mover bigrig-diagnostics-20231030-1106.zip
  24. Based on the photos below, i would expect that my Media on disk20 would be moved by the mover to disk 1-16. But when i run mover, it instant start-stops. waiting on logs to finish running with mover logging enabled.