Richamc01

Members
  • Posts

    24
  • Joined

  • Last visited

Everything posted by Richamc01

  1. I am having some problems when exporting a page to PDF. The pictures are either behind the text or just do not show up at all. When I export as an HTML, the pictures show up as they should. Edit: I am on Unraid 6.8.3 and BookStack v21.08.5 Any help would be appreciated. Screenshot of the page when viewing in BookStack: Screenshot of the exported PDF with images behind the text: Screenshot of the PDF with the image not appearing: (Image should be between the large text and the smaller text)
  2. I'm having major issues getting Nextcloud to update. I tried to update through the GUI and eventually had to restore my appdata from a backup as Nextcloud became inoperable. Now I'm trying through the CLI. Option 2 from the first page of this forum results in: Step 6 is currently in process. Please call this command later. So, I tried Option 3 (manual upgrade using occ) when I run the perform upgrade step, I am presented with: Nextcloud or one of the apps require upgrade - only a limited number of commands are available You may use your browser or the occ upgrade command to do the upgrade Setting log level to debug Turned on maintenance mode Exception: Updates between multiple major versions and downgrades are unsupported. Update failed Maintenance mode is kept active Resetting log level Then I found your post and I tried the first command you mention and I get: sudo: unknown user: abc sudo: unable to initialize policy plugin It seems way too complicated to update Nextcloud. Any idea what my options are now?
  3. Do you remember how you fixed this? I am trying to update and I'm experiencing the exact same.
  4. Did you ever get an answer to this? I just ran into this same issue when trying to disable the docker service.
  5. Hello, everyone. I have a problem that was caused by the system temp plugin (I think). Motherboard: Supermicro X8DTL-6F CPU: Dual Intel Xeon X5680 Unraid version: Latest stable (6.8, I think) I installed this plugin almost two years ago and it worked great. About a year ago, it stopped working. I tried to re-detecting the drivers (it found one) and I was able to get the CPU temp to show, but my motherboard was now showing a negative number and I could no longer see any fan stats. Today, I tried to fix this issue. I did some Googling and I came across this article in the unraid wiki. I followed the steps in the "older versions" (at the time, I thought this meant older hardware. I now know this means older unraid version) and after completing step 7, I logged into the GUI with my phone (I did the steps before while using a monitor and keyboard connected directly to the server) and tried to load the drivers. I clicked on detect and it pulled in 5 different drivers (coretemp, i5500_temp, jc42, w83627ehf, and w83795). I clicked on save and then tried to select the sensors from the drop-down menus. While I was doing this, the page tried to load and failed. I went back to the keyboard and mouse and tried pressing enter to get a response, but the system was frozen. I reset the server using the reset button on the front of my case and let it boot. I logged into the GUI again and it froze while trying to load the dashboard. I shut down the server by holding the power button on the front of the case and then turned it back on. I logged into the GUI again and I was able to get to the settings page, and then it froze again. At this point, I shut the server back down and I pulled the flash drive. I put it into my laptop to view the most recently modified files. This is where I stand now. Can someone offer some assistance, please? I would really like to not lose all of my data. I can pull information from the flash drive and upload here if it will be helpful, but I don't know what to even upload. Since the system locks up, I cant really pull the logs either. Please help! Edit: Brief update. I decided to power up the server amd take a look in the BIOS for any leads. When I load into the BIOS, it is very slow and gets to the point where it becomes unresponsive. I am going to try and re-flash the BIOS and see what happens.
  6. Take a look at spaceinvader one’s YouTube channel. He’s the only reason my server is as successful as it is. Edit: to answer a little more specifically, I am using Mariadb for the database. There’s a docker for it in CA. You create the database and user manually, before installing Bookstack. Edit 2: here is a walkthrough tutorial. It’s up to you if you want to put yours behind a reverse proxy or not. https://technicalramblings.com/blog/how-to-install-bookstack-and-reverse-proxy-it-using-linuxserver-letsencrypt-on-unraid/#:~:text=Installing Bookstack,let the container start up.
  7. Can confirm: using Method 1 would try to install Catalina. I switched to Method 2 and it is now installing Big Sur.
  8. No problem @Janddy! Sorry for the delayed response, but I do not remember needing to modify the .env file, but I will double-check. Unless you already figured this out?
  9. Here you go, @Janddy. This is my config file for subdomain. Just make sure that you add the CNAME in the DNS settings of your domain provider. I followed one of SpaceInvader's videos to set up a different docker behind the reverse proxy and then just kind of fumbled my way through other ones. # make sure that your dns has a cname set for bookstack and that your bookstack container is named bookstack # Ensure you have the APP_URL Environment Variable set correctly in your Docker Run/Compose or in BookStack Env File (/www/.env) # https://github.com/linuxserver/docker-bookstack#docker server { listen 443 ssl; listen [::]:443 ssl; server_name bookstack.*; include /config/nginx/ssl.conf; client_max_body_size 0; # enable for ldap auth, fill in ldap details in ldap.conf #include /config/nginx/ldap.conf; # enable for Authelia #include /config/nginx/authelia-server.conf; location / { #enable the next two lines for http auth #auth_basic "Restricted"; #auth_basic_user_file /config/nginx/.htpasswd; # enable the next two lines for ldap auth #auth_request /auth; #error_page 401 =200 /ldaplogin; # enable for Authelia #include /config/nginx/authelia-location.conf; include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_app bookstack; set $upstream_port 80; set $upstream_proto http; proxy_pass $upstream_proto://$upstream_app:$upstream_port; } }
  10. I have mine working with swag and duck dns. Do you have your own domain? I can send you my working config file. Edit: I'm on mobile and Tapatalk was giving me issues with the quote inside of the quote. Gave up and deleted it. Sent from my iPhone using Tapatalk
  11. Hello, I recently started using the NUT-InfluxDB-Exporter Docker container and it was working great up until yesterday. My Grafana dashboard stopped showing any data on the UPS. Upon looking in the logs for the container, it shows the below over and over. Also, it seems that the NUT plugin stopped working. I went to the settings to look at the settings and It showed that it was running, but it was not showing me any data. I used the "Reload" button and this did not help. I then stopped the service by setting the first option to "No" and then set it back to "Yes" to start it again. Now, even when it is set to yes, the status shows "stopped". Screenshot below. Connecting to InfluxDB host:192.168.89.5, DB:nut Connected successfully to InfluxDB Connecting to NUT host 192.168.89.5:3493 Traceback (most recent call last): File "/usr/local/lib/python3.8/site-packages/nut2.py", line 97, in _connect self._srv_handler = telnetlib.Telnet(self._host, self._port, File "/usr/local/lib/python3.8/telnetlib.py", line 218, in __init__ self.open(host, port, timeout) File "/usr/local/lib/python3.8/telnetlib.py", line 235, in open self.sock = socket.create_connection((host, port), timeout) File "/usr/local/lib/python3.8/socket.py", line 808, in create_connection raise err File "/usr/local/lib/python3.8/socket.py", line 796, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/src/nut-influxdb-exporter.py", line 47, in <module> ups_client = PyNUTClient(host=nut_host, port=nut_port, login=nut_username, password=nut_password, debug=(verbose == 'true')) File "/usr/local/lib/python3.8/site-packages/nut2.py", line 70, in __init__ self._connect() File "/usr/local/lib/python3.8/site-packages/nut2.py", line 112, in _connect raise PyNUTError("Socket error.") nut2.PyNUTError: Socket error. Any ideas??
  12. Where is all of the data for bookstack saved? I believe it is saved in the database, but my mariadb saves to the appdata folder which lives on my cache drive. I am right to be concerned about high usage on my cache drive?
  13. Thanks for the reply. Rebooting the server seemed to fix the problem for me. I didn't think to reboot as no changes were made to have caused this.
  14. I am using PRTG to monitor my unraid machine using this plugin. About an hour ago, most of my sensors went down. I connected via SSH and ran the "snmpwalk -v2c -c public localhost" command and received "Timeout: No Response from localhost". After reading some other suggestions on this forum, I logged into the server and I was able to ping "localhost". I then ran the "curl -I http://localhost/" command and below if what I received back. Can anyone help me out with this? Nothing changed on the server, so I am a little baffled as to why it just randomly stopped working. HTTP/1.1 302 Moved Temporarily Server: nginx Date: Mon, 01 Jun 2020 19:06:17 GMT Content-Type: text/html Content-Length: 138 Connection: keep-alive Location: http://localhost/Dashboard
  15. I completed Windows updates and I still have no mouse. I can still click on things, I just cannot see the cursor.
  16. My mouse completely disappears after installing the Red Hat QXL controller for the display adapter. I was able to roll back the driver and get it back. Installing Windows updates now to hopefully fix this. Anyone else have this problem?
  17. I tested the indexers on Jackett before posting my question and they all passed. This time I tested them all through Radarr and now my searching works fine....this being said, when I checked my logs, I see the message below over and over. I downloaded this (yes, i own the movie), and it only downloaded a .mkv file and did not put it in a folder. I checked in my media folder and it did not move the file automatically, so I moved it manually. After seeing this in the logs, I changed the name back and put it back into the folder but I am still getting the message. I know Radarr has access to the folder, because this happened for another download and when I put it back, the message stopped. Now it's just this one on repeat. EDIT: Deleted the logs that I originally posted. I figured out that those titles were stuck in the activity queue which was causing this. Deleting them from the queue fixed the problem.
  18. I just updated to Radarr Ver. 0.2.0.1358 and I am unable to manually search for downloads. Before the update I could manually search and select the download that I wanted, now when trying to search, it only searches for a split second and then displays "No results found:. Before the update, I had successfully searched for, and downloaded, a movie. I tried to search for this movie again as I know there are results but it shows the same error. Any suggestions?
  19. Let me start by saying, I don't believe I am having and issues with my setup; everything seems to be working as it should. This is more for my personal knowledge. Now, these are probably dumb questions and have probably already been answered but I was unable to find a solid answer from my searches. I am very new to this so please forgive my ignorance.... I have DelugeVPN setup to download "/data/incomplete", once the download completes, it moves to file/folder to "/data/completed". This is working flawlessly. I have the Sonarr container path: /media set to "/mnt/user/T.V. Shows/" and the container path: /data set to "/mnt/user/Downloads/". I have Radarr set up similarly; container path: /media set to "/mnt/user/Movies/" and the container path: /data set to "/mnt/user/Downloads/". I set Sonarr to download a TV Show, it went into Deluge as it should have. When it began downloading it was in the "incomplete" folder. When it finished downloading, it was moved to the "completed" folder. I then looked in my T.V. Shows folder and found the new folder with the individual season folder inside. I have Sonarr, Radarr, and Jackett setup to fetch the downloads. This is where my confusion sets in. To my understanding, Sonarr and Radarr are supposed to move the downloads from "/data/completed" to the appropriate media folders once Deluge has finished downloading them. As I mentioned, this appears to be happening. My first question is, how does this magic happen? I guess I'm just confused about the flow of everything. Second question: after Sonarr moved the download file from the "completed" folder, I now have two copies of the downloaded file. One copy is still in the "completed" folder and the other is in "/mnt/user/T.V. Shows/" folder. Is this because the file is still seeding in Deluge? Sorry for the long post, I also attached an image of my settings in unraid.