French-Guy Posted January 17, 2021 Share Posted January 17, 2021 (edited) Hello I just replaced my old motherboard+CPU (Atlhon X2 250) that has been working perfectly for several years (as a vanilla server) by a faster CPU (but still old) : a Phenom X6 1055T (with another motherboard as well) I just swapped the board, nothing more...... I was able to access the BIOS, to tell the motherboard to boot from the flash drive But when I get to the attached screen, it seems to stop.....! The cursor under the 2 lines is blinking, but nothing happens What should I look for ? I'm running the latest stable version by the way....Again, has been working flawlessly for several years with no hiccups !!! Thanks Edited January 17, 2021 by French-Guy Quote Link to comment
French-Guy Posted January 17, 2021 Author Share Posted January 17, 2021 (edited) I tried to download the latest release (6.8.3 - the one I was running) and extracted bzimage, bzroot and bzroot-gui and replaced them on my flash drive Didn't change anything I also tried the safe mode (with or without GUI) but nothing Same thing for the memtest.....it says download memtest, but nothing happens I know this mobo+cpu+ram works because I used it as my main computer with Windows 10 for many years !!! Please help.....what should I check? Is there anything in the BIOS I may have missed? I would hate to have to reinstall the previous motherboard+CPU....! Thanks Edited January 17, 2021 by French-Guy Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 Could it be the power supply (Corsair CX430) being too weak for this CPU ? What would be the symptoms then? But.....knowing I can access the BIOS, and Unraid starts the boot process anyway (loading bzimage, then loading bzroot...) doesn't it mean the PSU is enough? Quote Link to comment
JorgeB Posted January 18, 2021 Share Posted January 18, 2021 37 minutes ago, French-Guy said: Could it be the power supply (Corsair CX430) being too weak for this CPU ? Unlikely, looks more like a board compatibility problem, you could try a different flash drive. Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 How should I try with a different flash drive? Use the USB creator first, and then what are the folders or files to copy from my current flash drive to the new one? My current flash drive is a Sansisk Cruzer Fit 4Gb (which is not that old by the way)...What other recommended brand should I try then? Thank you Quote Link to comment
JorgeB Posted January 18, 2021 Share Posted January 18, 2021 Use a trial flash first, without your config, just to see if it boots. Quote Link to comment
Vr2Io Posted January 18, 2021 Share Posted January 18, 2021 Or try disable SVM ( AMD-V ) / IOMMU in BIOS. Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 11 minutes ago, Vr2Io said: Or try disable SVM ( AMD-V ) / IOMMU in BIOS. It's an old motherboard (Gigabite GA880) and I don't think I've seen anything about SVM ( AMD-V ) / IOMMU in the BIOS................But I will look again Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 18 minutes ago, JorgeB said: Use a trial flash first, without your config, just to see if it boots. I will check what flash drives I have on hand, and will give it a try.... If I were to buy a new one, what brands/models are recommended? Quote Link to comment
JorgeB Posted January 18, 2021 Share Posted January 18, 2021 Kingston DTSE9 (first gen USB 2.0) is known to work and also be reliable. Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 5 hours ago, JorgeB said: Use a trial flash first, without your config, just to see if it boots. So when I try that, there is no risk to alter any of my drives, right? I just let the server boots, but don't go any further? Quote Link to comment
JorgeB Posted January 18, 2021 Share Posted January 18, 2021 Just now, French-Guy said: right? right. Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 1 hour ago, JorgeB said: right. Well, I just tried with a Kinsgton Datatraveler 2.0, and I'm getting the exact same results. Blinking cursor after "Loading /bzroot...OK" That's weird Even when I try the memtest86+, it says loading memtest...OK, but then nothing other than a blinking cursor That's very frustrating......! Quote Link to comment
dansushi Posted January 18, 2021 Share Posted January 18, 2021 I'm also having this same issue when switching to a new motherboard after the old one failed. I'm now using the MSI MAG B460 TORPEDO and UnRaid 6.9-RC2, when previously I was on 6.8.3 stable. I had to use the RC2 in order for my networking drivers to work with the new motherboard. I can't get to the Web UI on the server itself (just see the blinking cursor), but I can access it over the network from my other computers. Quote Link to comment
Vr2Io Posted January 18, 2021 Share Posted January 18, 2021 3 minutes ago, dansushi said: I'm also having this same issue when switching to a new motherboard after the old one failed. I'm now using the MSI MAG B460 TORPEDO and UnRaid 6.9-RC2, when previously I was on 6.8.3 stable. I had to use the RC2 in order for my networking drivers to work with the new motherboard. I can't get to the Web UI on the server itself (just see the blinking cursor), but I can access it over the network from my other computers. Try below BIOS setting 1 Quote Link to comment
JorgeB Posted January 18, 2021 Share Posted January 18, 2021 17 minutes ago, French-Guy said: Blinking cursor after "Loading /bzroot...OK" That's weird Yep, most likely some board compatibility issue with Linux/Unraid. Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 1 minute ago, JorgeB said: Yep, most likely some board compatibility issue with Linux/Unraid. Grrrrrrr..........................!!! Quote Link to comment
dansushi Posted January 18, 2021 Share Posted January 18, 2021 11 minutes ago, Vr2Io said: Try below BIOS setting I did come across this post, and set it to Enabled, but it didn't fix the issue unfortunately... Quote Link to comment
Vr2Io Posted January 18, 2021 Share Posted January 18, 2021 2 minutes ago, dansushi said: I did come across this post, and set it to Enabled, but it didn't fix the issue unfortunately... I misunderstand you are talking about local GUI, but your problem should be NIC or driver relate, pls open a new post and post diagnostics file. Quote Link to comment
Vr2Io Posted January 18, 2021 Share Posted January 18, 2021 (edited) 7 hours ago, French-Guy said: It's an old motherboard (Gigabite GA880) and I don't think I've seen anything about SVM ( AMD-V ) / IOMMU in the BIOS................But I will look again Not exactly BIOS for GA880, pls check have Virtualization option or check EFI CD/DVD Boot Option too. Edited January 18, 2021 by Vr2Io Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 1 minute ago, Vr2Io said: Not exactly BIOS for GA880, pls check have such option or check EFI CD/DVD Boot Option I have virtualization in my BIOS, and it is set to DISABLED... Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 I must be cursed...I've put back the previous motherboard+CPU And this time, it's the whole box that doesn't even turn on !!!! I did verify at least 5 times the jumpers from the front panel, and they are properly plugged If the PSU quit, then I'm really out of luck.... ! 1 Quote Link to comment
French-Guy Posted January 18, 2021 Author Share Posted January 18, 2021 well, false alarm....my server is back in business and running as it was before Too bad it seems my X6 1055T with the gigabyte GA880 didn't work......well, maybe not since power consumption would have not been ideal with such CPU I may need to find something more efficient but still cheap Quote Link to comment
French-Guy Posted January 23, 2021 Author Share Posted January 23, 2021 well...that's weird ! I've installed the X6 1055T and its motherboard (GA 880) in another case to use it as a Windows machine I wanted to try 1 more time with the trial flash drive.....and it seems to work ! The only difference is the PSU (I doubt it's the reason) and the absence of the LSI card (SAS 9211 -8i) I have in my server Would it be a compatibility issue between the LSI card and the GA880? Quote Link to comment
S80_UK Posted January 23, 2021 Share Posted January 23, 2021 (edited) It's not impossible. You could just try this which is a simple reversible modification that I and others have had to perform on similar cards... I had to do this on a Dell H310 card (same chip set I believe) after changing to a Gigabyte motherboard from an Asrock of a similar age. You can try just masking the two pins on the top side of the LSI HBA board and see if it makes any difference. If it doesn't help, then there's no harm done. Edited January 23, 2021 by S80_UK Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.