JorgeB Posted August 27, 2021 Share Posted August 27, 2021 2 minutes ago, comet424 said: no one ever believes you unless you got screen shots Sorry but don't believe that could happen, if the settings were as they are now. Quote Link to comment
comet424 Posted August 27, 2021 Author Share Posted August 27, 2021 oh ya forgot.. it was running a Parity Check at the same time i was doing the copying.. i do not know if parity checking and Copying with Krusader at the same time.. i found i was having issues with Rsysnc too.. as i was working on my user scripts while parity checking was going on.. now when rysnc ran it it was to create folders or files.. Krusader was able to see these folders.. but rysnc couldnt... when i went to the terminal and cd /........ to the actual directory.. that folder/ file wasnt actually there.... and then krusader stopped working as a docker.. you couldnt shut it down or when you restarted it didnt work i dont know if that had a factor to the issues.. and i waited till unraid was done parity checking.. maybe it was the issues it went down to 100meg.. i didnt think of adding to it.. but it was before i was doing my sisters krusader copy. but its fine you dont believe me if it ever happens again ill make sure i take screen shots.. cuz it happened... unless the Main page was incorectly displaing wrong free space.. thanks for listening and helping so far... if it happens again ill make sure i grab screen shots.. cuz i know what i saw and was dealing with i not crazy... 🙂 always learning 🙂 Quote Link to comment
trurl Posted August 28, 2021 Share Posted August 28, 2021 Minimum Free doesn't mean always keep that amount free. It means if a disk doesn't have at least Minimum Free, choose a different disk. If a disk has more than Minimum, the disk can be chosen regardless of how large the file becomes. Example: Minimum is 10G, disk has 15G free. If you write a 10G file, the disk can be chosen because it has more than Minimum. If the disk is chosen the disk will have 5G remaining after the 10G file is written. After that, the disk won't be chosen again because it has less than Minimum. Example: Minimum is 10G, disk has 15G free. If you write a 20G file, the disk can be chosen because it has more than Minimum. If the disk is chosen, it will run out of space and give an error. Quote Link to comment
matty2k Posted August 28, 2021 Share Posted August 28, 2021 Please refer to my topic here: I am running into the same problems again and again with different configurations. Also tried to exclude one disk, but nevertheless Krusader fills up the disk and does not jump to next disk in array. While seemst to be working well via SMB file transver from another machine. There must be something wrong either with Krusader or with Unraid 6.10RC1. Quote Link to comment
itimpi Posted August 28, 2021 Share Posted August 28, 2021 1 hour ago, matty2k said: Please refer to my topic here: I am running into the same problems again and again with different configurations. Also tried to exclude one disk, but nevertheless Krusader fills up the disk and does not jump to next disk in array. While seemst to be working well via SMB file transver from another machine. There must be something wrong either with Krusader or with Unraid 6.10RC1. I would expect problems with that restrictive a Split Level setting. In Krusader what access mode has been allowed for the Access to the Unraid shares? I believe that you want it to be R/W slave (although I do not see how that being wrong can cause your symptoms). Quote Link to comment
JorgeB Posted August 28, 2021 Share Posted August 28, 2021 1 hour ago, matty2k said: There must be something wrong either with Krusader or with Unraid 6.10RC1. Please try doing the same thing with Midnight Commander (mc on the console), that will confirm if there's an issue with Krusader or some other thing. I did repeat the test I did yesterday with v6.10, since before I did it with 6.9.2, and the first time I did it with Krusader it did go well beyond the minimum free space set, curiously a 2nd try after rebooting worked as expected, so there might be something there. Quote Link to comment
JorgeB Posted August 28, 2021 Share Posted August 28, 2021 15 minutes ago, JorgeB said: and the first time I did it with Krusader it did go well beyond the minimum free space set Looks like under certain circumstances, e.g., if a new share is created, and then minimum free space is set, it doesn't take until next array start, and this happens with Krusader or MC, so you might want to try that also. Quote Link to comment
matty2k Posted August 28, 2021 Share Posted August 28, 2021 Well, I just restarted the whole server and tried another copy of files and the transfer started to the correct disk this time (I did not change anything n the sharesettings after restart). By the way, meanwhile I also have split level set to split as needed (before restart too) and this did not make any difference. Quote Link to comment
matty2k Posted August 28, 2021 Share Posted August 28, 2021 I have set Read/Write Slave for: /mnt/disks/ /mnt/remotes/ And Read/Write for: /mnt/user/ This was adviced in space invader one video tutorial. Quote Link to comment
doctortt Posted August 21, 2023 Share Posted August 21, 2023 (edited) This Krusader app is so confusing. See the screenshot. Why is Krusader showing 28.6GB when I'm 100% certain that this path has like 10 TERABYTES available? The share below is a dataset on a ZFS POOL. This wrong capacity is preventing me from copying a batch of files in excess of 28.6GB. Edited August 21, 2023 by doctortt Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.