Lawrencea7 Posted November 8, 2021 Share Posted November 8, 2021 21 hours ago, Kameleon83 said: Hello and thank you, Yes, that's a good idea. I will try to integrate that later. I am quite busy in the coming days. --------------------- Bonjour et merci, Oui, c'est une bonne idée. Je vais essayer d'intégrer cela par la suite. Je suis assez occupé dans les jours à venir. I wouldn't imagine there is, but does a GitHub page exist for this project? I'd love to try to integrate something like this for my VMware environment as well as the VMs on my unraid server. Quote Link to comment
Unraid-arr Posted November 8, 2021 Share Posted November 8, 2021 20 hours ago, Kameleon83 said: Thanks for your feedback. Being a small mistake, I took 2 minutes to correct it. Update and try again. Thanks very much, just tested. Works perfect now. Quote Link to comment
Kameleon83 Posted November 8, 2021 Author Share Posted November 8, 2021 I open my bitbucket. https://[email protected]/kameleon83/unraid-docker-webui.git 2 Quote Link to comment
Kameleon83 Posted November 13, 2021 Author Share Posted November 13, 2021 - Adding zoom in/out - Adding a filter - Add a HOST environment variable to set your HOSTNAME or dns (if ports are open) 1 Quote Link to comment
dada051 Posted November 13, 2021 Share Posted November 13, 2021 Just updated, great work! Thank you 1 Quote Link to comment
asopala Posted November 16, 2021 Share Posted November 16, 2021 I seem to be having an issue where I click the docker I wish to view and it seems to try to connect me to a different tower that I've never seen before called saminthedark (apologies to anyone who has that). Not sure what to do. Doesn't connect to any of my docker containers either. Worked before, but seems to have recently come up. Quote Link to comment
Kameleon83 Posted November 16, 2021 Author Share Posted November 16, 2021 11 minutes ago, asopala said: I seem to be having an issue where I click the docker I wish to view and it seems to try to connect me to a different tower that I've never seen before called saminthedark (apologies to anyone who has that). Not sure what to do. Doesn't connect to any of my docker containers either. Worked before, but seems to have recently come up. It’s normal. A new input on config (HOST). Change value and it will fine. 1 Quote Link to comment
Serverless Posted December 3, 2021 Share Posted December 3, 2021 Hi, can't access the webui, this is the error in the log: http: panic serving 192.168.1.8:50930: interface conversion: interface {} is nil, not bool goroutine 19 [running]: Any suggestion? Quote Link to comment
Kameleon83 Posted December 3, 2021 Author Share Posted December 3, 2021 (edited) 2 hours ago, Serverless said: Hi, can't access the webui, this is the error in the log: http: panic serving 192.168.1.8:50930: interface conversion: interface {} is nil, not bool goroutine 19 [running]: Any suggestion? Do you have the line with the error? Can you also send me your file, located in: /var/local/emhttp/plugins/dynamix.docker.manager/docker.json I work with this file. And according to your error, it tries to transform an information into a boolean when it should only be true or false. No sensitive data exists in this file but just in case, check it. Thanks for your feedback. Edited December 3, 2021 by Kameleon83 Quote Link to comment
Serverless Posted December 3, 2021 Share Posted December 3, 2021 (edited) 1 hour ago, Kameleon83 said: Do you have the line with the error? Can you also send me your file, located in: /var/local/emhttp/plugins/dynamix.docker.manager/docker.json I work with this file. And according to your error, it tries to transform an information into a boolean when it should only be true or false. No sensitive data exists in this file but just in case, check it. Thanks for your feedback. Hi, I attached the file you requested. I noted that there is one strange entry with the name of docker container "0" and all the vaules at "null"... Thanks! webgui error.txt docker.json Edited December 3, 2021 by Serverless Quote Link to comment
Serverless Posted December 3, 2021 Share Posted December 3, 2021 12 minutes ago, Serverless said: Hi, I attached the file you requested. I noted that there is one strange entry with the name of docker container "0" and all the vaules at "null"... Thanks! webgui error.txt 2.13 kB · 0 downloads docker.json 11.81 kB · 0 downloads Ok, I removed those lines and now everything is ok. Thanks for the hint, but I really don't know why that entry was generated... Quote Link to comment
Kameleon83 Posted December 4, 2021 Author Share Posted December 4, 2021 17 hours ago, Serverless said: Ok, I removed those lines and now everything is ok. Thanks for the hint, but I really don't know why that entry was generated... Thanks for the feedback. Thanks to your mistake, I put a security in case the problem comes back. I don't know why you got a 'null' instead of 'true' or 'false'. 1 Quote Link to comment
dada051 Posted December 29, 2021 Share Posted December 29, 2021 I added a small JS code in a user JS extension : window.onload = function(){ document.getElementById("filter").focus(); }; maybe it's something that you can integrate directly? Quote Link to comment
Kameleon83 Posted December 29, 2021 Author Share Posted December 29, 2021 17 minutes ago, dada051 said: I added a small JS code in a user JS extension : window.onload = function(){ document.getElementById("filter").focus(); }; maybe it's something that you can integrate directly? Hello, This is a good idea. I just put an autofocus on the input #filter. 😎 Quote Link to comment
ZachunRAID Posted January 5, 2022 Share Posted January 5, 2022 Hello! I am getting the following error: 2022/01/05 23:28:47 main.go:101: parse "http://192.168.86.16:[PORT:]": invalid port ":]" after host 2022/01/05 23:28:47 server.go:3160: http: panic serving 192.168.86.60:56012: runtime error: invalid memory address or nil pointer dereference Quote Link to comment
Squid Posted January 6, 2022 Share Posted January 6, 2022 Look at your various templates. One of them has a webUI entry of http://[IP]:[PORT:] The [PORT:] part is invalid and should have a number in there 1 Quote Link to comment
ZachunRAID Posted January 6, 2022 Share Posted January 6, 2022 That was it, thanks! DuckDNS was the offending container. 1 Quote Link to comment
Squid Posted January 6, 2022 Share Posted January 6, 2022 22 minutes ago, ZachunRAID said: That was it, thanks! DuckDNS was the offending container. Thanks. Probably due to how LSIO generates the templates that entry is stuck in there, but I'll remove it from CA for installs going forward Quote Link to comment
Davide95 Posted January 7, 2022 Share Posted January 7, 2022 On 9/7/2021 at 3:10 PM, Meles Meles said: It doesn't take into account a container having its own IP address I have the same problem. I have a docker container with a fixed IP address and when i click spore its tab the app takes me back to the Unraid login screen. How can I solve this issue ? I think I missing something in the configuration tab. I set as HOST the IP address of the Unraid server, but in this way only the bridge dockers work well, not the br0 with it's own fixed IP. Quote Link to comment
Kameleon83 Posted January 7, 2022 Author Share Posted January 7, 2022 11 hours ago, Davide95 said: I have the same problem. I have a docker container with a fixed IP address and when i click spore its tab the app takes me back to the Unraid login screen. How can I solve this issue ? I think I missing something in the configuration tab. I set as HOST the IP address of the Unraid server, but in this way only the bridge dockers work well, not the br0 with it's own fixed IP. Hello Davide95, Indeed, you have to put the HOST of your Unraid or a remote Host with a DynDNS. My software retrieves the file /var/local/emhttp/plugins/dynamix.docker.manager/docker.json. Can you send me this file, privately? Also tell me the container, so I can try to find a solution if it is possible. Have a nice day. Quote Link to comment
Kameleon83 Posted January 9, 2022 Author Share Posted January 9, 2022 Hello, I have added a UNRAID_IP variable. It will allow to set the IP address of the server by default. So if a container does not have the same IP then it will not replace it with HOST. The template has changed. 1 1 Quote Link to comment
Unraid-arr Posted January 13, 2022 Share Posted January 13, 2022 On 1/9/2022 at 6:56 AM, Kameleon83 said: Hello, I have added a UNRAID_IP variable. It will allow to set the IP address of the server by default. So if a container does not have the same IP then it will not replace it with HOST. The template has changed. Hey, thanks for the active work on this Web-App I would like to understand more on what these variables are doing internally. I have them both set to the local IP address of server. Some more context may be better for understanding. Also, how can I change the title of your page "Docker Web UI" to what I want to? as I keep this tab open all the time and would like to rename to something I can quickly get to. Thanks for the app again. Cheers! 1 Quote Link to comment
Kameleon83 Posted January 14, 2022 Author Share Posted January 14, 2022 14 hours ago, Shomil Saini said: Hey, thanks for the active work on this Web-App I would like to understand more on what these variables are doing internally. I have them both set to the local IP address of server. Some more context may be better for understanding. Also, how can I change the title of your page "Docker Web UI" to what I want to? as I keep this tab open all the time and would like to rename to something I can quickly get to. Thanks for the app again. Cheers! I'm watching this this weekend. I'll explain it a bit better and put another environment variable for the page title. 1 Quote Link to comment
Kameleon83 Posted January 16, 2022 Author Share Posted January 16, 2022 On 1/13/2022 at 7:16 PM, Shomil Saini said: Hey, thanks for the active work on this Web-App I would like to understand more on what these variables are doing internally. I have them both set to the local IP address of server. Some more context may be better for understanding. Also, how can I change the title of your page "Docker Web UI" to what I want to? as I keep this tab open all the time and would like to rename to something I can quickly get to. Thanks for the app again. Cheers! I added a TITLE variable to change the title of the page. By default, I left Docker WebUI. I also changed the description on page 1. I hope it will be newer understandable on how to use the variables. If you want to see newer, go to the BitBucket 1 Quote Link to comment
Exes Posted January 16, 2022 Share Posted January 16, 2022 Keep getting this when accessing the web gui. I removed my IP and put <IP> instead This page isn’t working <IP> didn’t send any data. ERR_EMPTY_RESPONSE Here's my docker json if you want it docker.json Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.