I was getting the "bad download, deleting file" error that others have talked about.  So I went ahead and installed everything manually.  Unfortunately, the problem I am running into now is the CSS is messed up regardless of what browser I'm using.  I've cleared cache about a million times but keep having the same issue. 

 

Tested using Chrome v22, IE9, IE10, FF v15. 

 

The page is usually fine on first load but as soon as I start navigating within the interface everything goes to hell. 

They all say:

 

0 %system kbmemfree 0 0 0.00 0.00

 

...when I click on them. I saw a few spikes on the network graph when I did this, but that's it.

Anyone else experiencing CSS issues with the new SimpleFeatures release?  I had problems with the .plg's installing by themselves on reboot (see below).  So I just ended up installing them manually myself.

 

Now the issue I'm having is the CSS continually comes and goes as I'm navigating the interface.  I've tested this on the following browsers and cleared cache hundreds of times but no luck.

 

Browsers tested:  IE9, IE10, FF v15, Chrome v22

 

 

 

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.active.streams-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.active.streams-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.active.streams-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.activity.monitor-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.activity.monitor-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.activity.monitor-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.cache.dirs-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.cache.dirs-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.cache.dirs-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.core.webGUI-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.core.webGUI-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.core.webGUI-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.disk.health-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.disk.health-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.disk.health-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.dns.server-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.dns.server-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.dns.server-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.email.notify-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.email.notify-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.email.notify-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.log.viewer-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.log.viewer-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.log.viewer-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.s3.sleep-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.s3.sleep-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.s3.sleep-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.system.info-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.system.info-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.system.info-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.system.stats-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.system.stats-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.system.stats-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: simpleFeatures.web.server-1.0.5-noarch-1

Oct  2 21:02:10 Tower logger:  file /boot/config/plugins/simpleFeatures/simpleFeatures.web.server-1.0.5-i486-1.tgz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.web.server-1.0.5-i486-1.tgz ... bad download, deleting

Oct  2 21:02:10 Tower logger: installing plugin: *

Since my Simplefeatures upgrade the other day, my server is no longer sleeping as it did prior. I am using the s3 sleep plugin. I see the option:

Interval of network / device inactivity (minutes): 5

I'm not sure if I had a setting in there before. Does that mean it needs to wait 5 minutes after network activity stops? I have the check box "Wait for network inactivity:" below set to no.

 

My go file has:

/usr/local/sbin/s3_sleep -a -m10 -t5 -eeth0 -h03 -p /usr/local/bin/postRun

You need to remove any reference to the "old" SimpleFeatures plugins in your go file.

 

With the new plugin system this is not required anymore and may give issues when not removed.

Can you compare the following on your system ?

 

 ls -l /usr/local/emhttp/plugins/webGui/style/template.css
-rwxrwxrwx 1 root root 16970 2012-10-01 01:06 /usr/local/emhttp/plugins/webGui/style/template.css*

Okay. Thank you. Do I still need to "apply" my post sleep action after each boot, or was that fixed?

Okay. Thank you. Do I still need to "apply" my post sleep action after each boot, or was that fixed?

That is fixed now...

See screenshot attached - this is how you make it send only errors.

There is a small bug at the moment. Once a field has a value you can't clear it anymore. Will be corrected in the next version!

 

Temporary workaround:

 

Edit the file /etc/unraid_notify.conf manually

 

They all say:

 

0 %system kbmemfree 0 0 0.00 0.00

 

...when I click on them. I saw a few spikes on the network graph when I did this, but that's it.

 

Could be that your server is bored? 

@bonienl

After removing that from my go file, the server does not sleep again. I am going to remove the simplefeatures.cfg file and restart the server and see what happens.

 

@speeding_ant

Are you saying it is working, but the server just has nothing to do? With it being an Atom based system I figured I'd see some sort of activity in the CPU and RAM graphs.

 

I started a download in SABnzbd, and my network graph still shows nothing.

 

Hello

I'd like to use the SimpleFeatures DNS to redirect some queries to a different upstream DNS server.

For example redirect /cbs.com to DNS server 1.2.3.4

 

Would you consider modifying your DNS plugin with a section where one could add any additional DNSMasq parms.?

 

Such as  server=/cbs.com/1.2.3.4

@bonienl

After removing that from my go file, the server does not sleep again. I am going to remove the simplefeatures.cfg file and restart the server and see what happens.

 

@speeding_ant

Are you saying it is working, but the server just has nothing to do? With it being an Atom based system I figured I'd see some sort of activity in the CPU and RAM graphs.

 

I started a download in SABnzbd, and my network graph still shows nothing.

Did you also remove the old "tgz" files in the /boot/extra folder ?

 

Does the status of the Sleep plugin (top right in the settings menu) show "running" ?

 

Do you also have an empty graph when choosing "since start" as display period?

 

Lots of questions, but I have the feeling something between old and new SF have mixed up on your system...

Hello

I'd like to use the SimpleFeatures DNS to redirect some queries to a different upstream DNS server.

For example redirect /cbs.com to DNS server 1.2.3.4

 

Would you consider modifying your DNS plugin with a section where one could add any additional DNSMasq parms.?

 

Such as  server=/cbs.com/1.2.3.4

 

That is already possible, put the text "/cbs.com/1.2.3.4 in the field of "External DNS servers".

 

Did you also remove the old "tgz" files in the /boot/extra folder ?

 

Does the status of the Sleep plugin (top right in the settings menu) show "running" ?

 

Do you also have an empty graph when choosing "since start" as display period?

 

Lots of questions, but I have the feeling something between old and new SF have mixed up on your system...

I removed the entire /boot/extra folder.

 

Yes, sleep says Running.

 

No, I have stats when set to since start. That looks good.

 

Maybe I should remove all of it and start fresh again.

Did you also remove the old "tgz" files in the /boot/extra folder ?

 

Does the status of the Sleep plugin (top right in the settings menu) show "running" ?

 

Do you also have an empty graph when choosing "since start" as display period?

 

Lots of questions, but I have the feeling something between old and new SF have mixed up on your system...

I removed the entire /boot/extra folder.

 

Yes, sleep says Running.

 

No, I have stats when set to since start. That looks good.

 

Maybe I should remove all of it and start fresh again.

 

Good idea   Sorry, the "server just not busy" joke wasn't serious. I've just had two long days at work back to back.

Oh no worries. I did not take it seriously. I'll try everything fresh tonight and report back...hopefully with good news.

That is already possible, put the text "/cbs.com/1.2.3.4 in the field of "External DNS servers".

 

I"ll try that ..

Should I put the default upstream servers there too..?? Or does DNSMasq use the configured system DNS server ?

 

 

I'm getting an error when I try to run that code.  I pulled the css file out of that directory and attached below.  If someone can compare or provide to theirs thats working I would appreciate it.

 

 

template.txt

installed the 1.0.5 plugin and I am getting the following line at the top of the web GUI

 

"Warning: parse_ini_file(/var/local/emhttp/simpleFeatures.ini): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/webGui/template.php on line 201"

 

Here are the plugins that I have installed

 

root@storage2:/boot# ls -al extra/

total 2800

drwxrwxrwx 2 root root    4096 2012-10-03 20:52 ./

drwxrwxrwx 5 root root    4096 1969-12-31 16:00 ../

-rwxrwxrwx 1 root root    8059 2012-10-03 20:31 simpleFeatures.activity.monitor-1.0.5-i486-1.tgz*

-rwxrwxrwx 1 root root  499264 2012-10-03 20:30 simpleFeatures.core.webGUI-1.0.5-i486-1.tgz*

-rwxrwxrwx 1 root root    9351 2012-10-03 20:30 simpleFeatures.disk.health-1.0.5-i486-1.tgz*

-rwxrwxrwx 1 root root 2006211 2012-10-03 20:31 simpleFeatures.email.notify-1.0.5-i486-1.tgz*

-rwxrwxrwx 1 root root    2839 2012-10-03 20:31 simpleFeatures.system.info-1.0.5-i486-1.tgz*

-rwxrwxrwx 1 root root  327123 2012-10-03 20:30 simpleFeatures.system.stats-1.0.5-i486-1.tgz*

root@storage2:/boot#

 

and only after I Applied the Display Settings did that message go away. Also, the gui font appeared weird(wish I capture a screenshot) and the temp of the drives was in Fahrenheit when settings were showing Celcius.

 

J

also noticed that some of the icons appear broken

 

broken icons here too...

 

Please re-read the new installation instructions. We've moved to plg plugins, and the location to put them has changed.

 

Cheers

Okay I finished with my fresh install. My real-time stats are still blank. I don't know yet if sleep is working, but I'll know by tomorrow.

Please re-read the new installation instructions. We've moved to plg plugins, and the location to put them has changed.

 

Cheers

 

ahhhh, simple install instructions. was used to the old style of installing and didn't check out the new install guidelines. apologies for the bother.

 

digging the new and improved stuff.

 

J

New plugin model works great and all the new tweaks are nice.  You might want to consider moving this thread into the plugins forum.