Bungy Posted January 31, 2016 Author Share Posted January 31, 2016 Dockers are pretty finicky and getting used to them at first can be difficult. I've often start by configuring the minimum amount of settings I need to going and then building from there. Try those two commands I just sent you. They don't include the volume mappings. You may have to wait like 30 seconds after the first one while the docker boots up before you get the 2nd one to work properly. If they work, then you can add the volume mappings in and see if you can get everything up and running. The syntax for volume mappings is -v [host_directory]:[container_directory] Hang in there. Dockers are a HUGE pain at first, but will end up being your best friend once you learn more about how to use them. Quote Link to comment
Bungy Posted January 31, 2016 Author Share Posted January 31, 2016 Running your commands, this is the error I get: ERROR 2003 (HY000): Can't connect to MySQL server on 'mysql' (111) Give it a few seconds and try the second command again. Sounds like the container is still booting up. I ran in to the same issue. Quote Link to comment
Skrot74 Posted January 31, 2016 Share Posted January 31, 2016 Running your commands, this is the error I get: ERROR 2003 (HY000): Can't connect to MySQL server on 'mysql' (111) Give it a few seconds and try the second command again. Sounds like the container is still booting up. I ran in to the same issue. That did it! mysql> prompt in the works now! Thanks bungy. Quote Link to comment
Bungy Posted February 1, 2016 Author Share Posted February 1, 2016 No problem! Happy to help Quote Link to comment
sexyj Posted February 11, 2016 Share Posted February 11, 2016 Installed the l3igg's template After I had it create the admin user, I ran into this error Data directory (/usr/share/webapps/owncloud/data) is readable by other users Please change the permissions to 0770 so that the directory cannot be listed by other users. Tried changing the permission and it'll throw a internal server error. Here's the current ownership. drwxrwxrwx 7 nobody users 192 Dec 2 18:13 ../ drwxrwxrwx 2 nobody users 48 Feb 10 01:56 certs/ drwxrwxrwx 2 nobody users 80 Feb 10 17:19 config/ drwxrwxrwx 3 nobody users 288 Feb 10 17:24 data/ Any idea how to correct this ? I assume I need to run the container as a specific user? Quote Link to comment
Bungy Posted February 11, 2016 Author Share Posted February 11, 2016 chmod -R 0770 data Quote Link to comment
Bungy Posted February 11, 2016 Author Share Posted February 11, 2016 I've actually switched away from l3iggs container to the official owncloud container. I found it has less bugs Quote Link to comment
Squid Posted February 11, 2016 Share Posted February 11, 2016 I've actually switched away from l3iggs container to the official owncloud container. I found it has less bugs maybe you should update your template then to point to the official container Quote Link to comment
Bungy Posted February 11, 2016 Author Share Posted February 11, 2016 Will do. I refrained since others are already using l3iggs but I'll update the template Quote Link to comment
Squid Posted February 11, 2016 Share Posted February 11, 2016 Will do. I refrained since others are already using l3iggs but I'll update the template Makes sense to me. If the template maintainer is using a different container because his original one has more bugs. Less confusing for new users (and the only other template is from gfjardim). Not 100% sure what'll happen to existing users (if they'll get notifications for an update) however Quote Link to comment
Bungy Posted February 11, 2016 Author Share Posted February 11, 2016 I'm pretty sure they won't unless they start from scratch. The updates pull from the running containers link to the registry and remaking the containers is typically done using the users local cache of the templates Quote Link to comment
sexyj Posted February 11, 2016 Share Posted February 11, 2016 I did and it gave the internal server error after that. chmod -R 0770 data Quote Link to comment
Bungy Posted February 11, 2016 Author Share Posted February 11, 2016 Is there anything in your docker logs? Quote Link to comment
sexyj Posted February 11, 2016 Share Posted February 11, 2016 None related, just following 160210 18:00:16 mysqld_safe Logging to '/var/lib/mysql/8d3297c7a987.err'. 160210 18:00:16 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql Is there anything in your docker logs? Quote Link to comment
Bungy Posted February 13, 2016 Author Share Posted February 13, 2016 I believe I've seen that before and simply restarting the docker fixed it. It would help to show the contents of that file as well Quote Link to comment
ericavi8tor Posted February 23, 2016 Share Posted February 23, 2016 Just spent the last day or two trying to get a Z-Stick Gen5 working with OpenHab. I want to share this just in case someone here is looking for a solution. This was the error: 2016-02-23 12:15:14.781 [iNFO ] [b.z.i.protocol.ZWaveController] - Connecting to serial port /dev/ttyACM0 2016-02-23 12:15:14.786 [ERROR] [b.z.i.protocol.ZWaveController] - Serial Error: Port /dev/ttyACM0 does not exist This is the fix: Edit the docker in the UnRAID GUI and set "Extra Parameters" to: --device /dev/ttyACM0:/dev/ttyACM0 Hope this helps Quote Link to comment
amigenius Posted March 9, 2016 Share Posted March 9, 2016 Hi, i've tried to update the gitlab docker today and it's not working anymore. At the end of the docker update/install i get the following errors: sh: -c: line 0: unexpected EOF while looking for matching ``' sh: -c: line 1: syntax error: unexpected end of file The Icon in CommunityApps is also missing (see screenshot). I think something is broken in the repository.... cya Quote Link to comment
Bungy Posted March 9, 2016 Author Share Posted March 9, 2016 Hi, i've tried to update the gitlab docker today and it's not working anymore. At the end of the docker update/install i get the following errors: sh: -c: line 0: unexpected EOF while looking for matching ``' sh: -c: line 1: syntax error: unexpected end of file cya Are you seeing this during the update or in the docker logs for the gitlab docker? Quote Link to comment
amigenius Posted March 9, 2016 Share Posted March 9, 2016 Hi, i see this at the end of the update/install cya Quote Link to comment
Bungy Posted March 9, 2016 Author Share Posted March 9, 2016 Hmm. I just updated my gitlab docker after seeing your and I'm not seeing the same thing. It sounds like something is going wrong with your gitlab template or with your docker image. Can you check how much free space your docker image has? You can see this on the dashboard view in unraid. Quote Link to comment
amigenius Posted March 9, 2016 Share Posted March 9, 2016 Hi, i found the problem.... My email password contains a backtick ` --link postgresql:postgresql --link redis:redisio ....... --env 'SMTP_PASS=XXXXX`XXX' ...... Thats causing the errors. Somesthing must have changed in one of the last releases, as it worked before this update. cya Quote Link to comment
amigenius Posted March 9, 2016 Share Posted March 9, 2016 Hi, fixed it for the current docker by adding \\\ before the backtick -> \\\` cya Quote Link to comment
snoopy86 Posted March 24, 2016 Share Posted March 24, 2016 Anyone using openhab on daily basis? I need to know if it works before i buy aeon zwave stick Quote Link to comment
Bungy Posted March 24, 2016 Author Share Posted March 24, 2016 I used to use openhab but switched to home assistant lately. It's much less buggy and easier to develop on. Im not sure about that specific device being supported but openhab definitely has extensive support for zwave in general. Quote Link to comment
Shamalamadindong Posted March 25, 2016 Share Posted March 25, 2016 First off, good to see you switched to the official docker container. I have a small problem however. I added the docker however i'm getting the following error: http://sharadchhetri.com/2014/07/21/owncloud-error-accessing-server-untrusted-domain/ It does give me a button to click to add it to the trusted domains but that doesn't work. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.