peter_sm Posted November 27, 2015 Share Posted November 27, 2015 I don't pass through the controller and remove it from "qemu:arg" I can post better info later if you need it Quote Link to comment
SpaceInvaderOne Posted November 27, 2015 Share Posted November 27, 2015 my passthough looks like this <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.1,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=00:14.0,bus=pcie.0'/> Quote Link to comment
peter_sm Posted November 27, 2015 Share Posted November 27, 2015 I use this for keyboard and mouse <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x045e'/> <product id='0x0040'/> </source> </hostdev> <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x045e'/> <product id='0x00b4'/> </source> </hostdev> Quote Link to comment
SpaceInvaderOne Posted November 27, 2015 Share Posted November 27, 2015 strange thing i was using <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.1,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=00:14.0,bus=root.1,addr=00.2'/> it worked fine for a while untill i installed unassigned device plugin into unraid. Usb passthrough stopped? even after uninstalling plugin. Plugin only effected the osx vm passthrough. windows was fine. edited it to <qemu:arg value='vfio-pci,host=00:14.0,bus=pcie.0'/> now its fine again. I have no idea why? Quote Link to comment
nate922 Posted November 27, 2015 Share Posted November 27, 2015 Thanks gridrunner. I've used your config (only changed the addresses) and it's still the same. Can I get your config file please? Something else must be causing a conflict. Cheers. <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=01:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=01:00.1,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=00:1a.0,bus=root.1,addr=00.2'/> my passthough looks like this <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.1,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=00:14.0,bus=pcie.0'/> Quote Link to comment
nate922 Posted November 27, 2015 Share Posted November 27, 2015 Thanks for that peter. I've also tried with passing single devices rather than the entire controller, and that crashes as well. Seems when I pass USB Clover crashes, take it out and clover is happy. Do you guys also have? <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </controller> Also you're using SeaBios right? I use this for keyboard and mouse <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x045e'/> <product id='0x0040'/> </source> </hostdev> <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x045e'/> <product id='0x00b4'/> </source> </hostdev> Quote Link to comment
archedraft Posted November 27, 2015 Author Share Posted November 27, 2015 Wow, Thanks for your help peter. It's all happening, I even passed the GPU and the GTX 970 is happy with OSX. So you got your GTX 970 working with full resolution? You're using clover now correct? Did you have to do anything special to get it working, i.e. Nvidia webdrivers, or special boot loader options? Quote Link to comment
peter_sm Posted November 27, 2015 Share Posted November 27, 2015 Thanks for that peter. I've also tried with passing single devices rather than the entire controller, and that crashes as well. Seems when I pass USB Clover crashes, take it out and clover is happy. Do you guys also have? <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </controller> Also you're using SeaBios right? I use this for keyboard and mouse <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x045e'/> <product id='0x0040'/> </source> </hostdev> <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x045e'/> <product id='0x00b4'/> </source> </hostdev> Please post your XML or PM me, then I can take a look if it's OK //Peter Quote Link to comment
nate922 Posted November 27, 2015 Share Posted November 27, 2015 Yep. Full Res Accelerated. I just added nvda_drv=1 in clover, and installed the latest Nvidia Web drivers of course. [edit] sorry I could of been a little clearer On first boot, boot with nv_disable=1 Install latest nvidia web drivers Reboot and add nvda_drv=1 to clover's boot args So you got your GTX 970 working with full resolution? You're using clover now correct? Did you have to do anything special to get it working, i.e. Nvidia webdrivers, or special boot loader options? Quote Link to comment
nate922 Posted November 27, 2015 Share Posted November 27, 2015 Please post your XML or PM me, then I can take a look if it's OK //Peter Thanks pete <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>CLOVER-GOOD-OSX-Guide-1-Current</name> <uuid>0aa39626-7ba1-2d41-9602-e2968b2fe36d</uuid> <metadata> <type>None</type> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='1'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-2.3'>hvm</type> <boot dev='hd'/> <bootmenu enable='yes'/> </os> <features> <acpi/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>core2duo</model> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/user/ssd/ElCapitan.img'/> <target dev='hda' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='dmi-to-pci-bridge'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/> </controller> <controller type='pci' index='2' model='pci-bridge'> <address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:00:20:30'/> <source bridge='br0'/> <model type='e1000-82545em'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0'/> </interface> <memballoon model='none'/> </devices> <seclabel type='none' model='none'/> <qemu:commandline> <qemu:arg value='-device'/> <qemu:arg value='isa-applesmc,osk=?'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=01:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=00:1a.0,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=01:00.1,bus=pcie.0'/> </qemu:commandline> </domain> Quote Link to comment
peter_sm Posted November 27, 2015 Share Posted November 27, 2015 looks good! So clover works for you :-) //Peter Quote Link to comment
nate922 Posted November 27, 2015 Share Posted November 27, 2015 looks good! So clover works for you :-) //Peter Heh all works except for USB, so no KB, Mouse or BT, I'm can only access it via VNC, lol Quote Link to comment
SpaceInvaderOne Posted November 27, 2015 Share Posted November 27, 2015 @nate922 why do you want to use clover. I have everything working without. Quote Link to comment
nate922 Posted November 27, 2015 Share Posted November 27, 2015 @nate922 why do you want to use clover. I have everything working without. Im just used to clover. But I'm getting desperate so I might move back to Enoch and see how I go. It's funny at the moment, I"m trying to control my 4K screen via VNC as I have no input devices, lol Quote Link to comment
nate922 Posted November 27, 2015 Share Posted November 27, 2015 @nate922 why do you want to use clover. I have everything working without. Hey gridrunner, Are you running <kernel>/mnt/user/ssd/enoch_rev2795_boot</kernel> ? Enoch doesn't detect my keyboards, changing it to clover and it's ok. Quote Link to comment
SpaceInvaderOne Posted November 27, 2015 Share Posted November 27, 2015 yes i am. I was thinking of using clover as had problems with hdmi sound but peter suggested to use HDMIAudio-1.1.dmg and it worked fine. i would suggest to just start again following the guide. The first time i tried it didnt work too. Just create new vdisk and do everything again. This is how my finished xml looked after getting it working passing through a 6450 and usb 3 controller. Hope it helps you spot something! Are you sure you are passing through the correct usb controller??? <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>OSX-El-Capitan-10.11</name> <uuid>1ecc7ddd-fd4e-2ee3-85c7-6f3afbf6ade1</uuid> <metadata> <type>None</type> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='3'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='5'/> <vcpupin vcpu='6' cpuset='6'/> <vcpupin vcpu='7' cpuset='7'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-2.3'>hvm</type> <kernel>/mnt/cache/virtual systems/osx/enoch_rev2795_boot</kernel> <boot dev='hd'/> <bootmenu enable='yes'/> </os> <features> <acpi/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>core2duo</model> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/cache/virtual systems/osx/vdisk2.img'/> <target dev='hda' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='dmi-to-pci-bridge'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/> </controller> <controller type='pci' index='2' model='pci-bridge'> <address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:00:20:30'/> <source bridge='ed'/> <model type='e1000-82545em'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0'/> </interface> <memballoon model='none'/> </devices> <seclabel type='none' model='none'/> <qemu:commandline> <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.1,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=00:14.0,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd'/> <qemu:arg value='-device'/> <qemu:arg value='usb-mouse'/> <qemu:arg value='-device'/> <qemu:arg value='isa-applesmc,osk=xxxxxxxxxxxxx put osk key here xxxxxxxxxxxxxxxx'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> </qemu:commandline> </domain> Quote Link to comment
nate922 Posted November 27, 2015 Share Posted November 27, 2015 Thanks buddy. That's exactly what I did, started again. Yes, it's the correct USB controller as the keyboard works under clover during boot. Now I can pass single USB devices, but when I pass the entire controller it crashes. Good news is that I can get it to boot with the UEFI bios and Clover, I hate legacy I'll look into it and thanks again for your help! yes i am. I was thinking of using clover as had problems with hdmi sound but peter suggested to use HDMIAudio-1.1.dmg and it worked fine. i would suggest to just start again following the guide. The first time i tried it didnt work too. Just create new vdisk and do everything again. This is how my finished xml looked after getting it working passing through a 6450 and usb 3 controller. Hope it helps you spot something! Are you sure you are passing through the correct usb controller??? <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>OSX-El-Capitan-10.11</name> <uuid>1ecc7ddd-fd4e-2ee3-85c7-6f3afbf6ade1</uuid> <metadata> <type>None</type> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='3'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='5'/> <vcpupin vcpu='6' cpuset='6'/> <vcpupin vcpu='7' cpuset='7'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-2.3'>hvm</type> <kernel>/mnt/cache/virtual systems/osx/enoch_rev2795_boot</kernel> <boot dev='hd'/> <bootmenu enable='yes'/> </os> <features> <acpi/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>core2duo</model> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/cache/virtual systems/osx/vdisk2.img'/> <target dev='hda' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='dmi-to-pci-bridge'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/> </controller> <controller type='pci' index='2' model='pci-bridge'> <address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:00:20:30'/> <source bridge='ed'/> <model type='e1000-82545em'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0'/> </interface> <memballoon model='none'/> </devices> <seclabel type='none' model='none'/> <qemu:commandline> <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=02:00.1,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=00:14.0,bus=pcie.0'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd'/> <qemu:arg value='-device'/> <qemu:arg value='usb-mouse'/> <qemu:arg value='-device'/> <qemu:arg value='isa-applesmc,osk=xxxxxxxxxxxxx put osk key here xxxxxxxxxxxxxxxx'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> </qemu:commandline> </domain> Quote Link to comment
niietzshe Posted December 17, 2015 Share Posted December 17, 2015 Hi. I've been following your guide up to stage 4.4 and I'm getting an error: "Unable to write to '/sys/fs/cgroup/cpuset/machine/OSX-El-Capitan-10.11-VNC.libvirt-qemu/vcpu1/cpuset.cpus': Numerical result out of range" Here are my files I have: /mnt/cache/VM/Install_OS_X_10.11_El_Capitan.iso /mnt/cache/VM/ElCapitan.img /mnt/cache/VM/enoch_rev2795_boot Here is my XML Running on Intel Pentium. Anyone have any ideas of how I can progress? Thanks Christian Quote Link to comment
CHBMB Posted December 17, 2015 Share Posted December 17, 2015 Hi. I've been following your guide up to stage 4.4 and I'm getting an error: "Unable to write to '/sys/fs/cgroup/cpuset/machine/OSX-El-Capitan-10.11-VNC.libvirt-qemu/vcpu1/cpuset.cpus': Numerical result out of range" Here are my files I have: /mnt/cache/VM/Install_OS_X_10.11_El_Capitan.iso /mnt/cache/VM/ElCapitan.img /mnt/cache/VM/enoch_rev2795_boot Here is my XML Running on Intel Pentium. Anyone have any ideas of how I can progress? Thanks Christian Hi Christian, What exact CPU have you got? It sounds like you're trying to allocate more cores than your CPU has... Try deleting line 12 from the xml. If that doesn't work post a screenshot like this one from the webui when you try and setup a new VM... Then we can work from there. (I'm at home now so easier to look at this in a bit more detail) Quote Link to comment
niietzshe Posted December 17, 2015 Share Posted December 17, 2015 Ahh so in the XML it was trying to use core 1 & 2? I only have a 2 core Pentium, so have cores 0 & 1... I'm at work at the minute so can't get access through the VNC port, but I've updated that and will check it out tonight. Thanks Christian Quote Link to comment
GreenEyedMonster Posted December 25, 2015 Share Posted December 25, 2015 Hey guys! I have been trying to get this to work for sometime now without success. I have been following this guide: https://macosxvirtualmachinekvm.wordpress.com/guide-mac-os-x-10-11-el-capitan-vm-on-unraid/ provided by Mr. Archedraft. The only difference is that I have 10.11.2 as that is what I download from the app store. Here is my build information: http://snag.gy/vrecb.jpg. I use the XML given and edit to fit my needs: http://pastebin.com/SY2ysZiM I then start the VM and I get to this screen: http://snag.gy/VSxTC.jpg Where I entered -v this time around. It got stuck here with "-v": http://snag.gy/Cv2AT.jpg Without "-v" I get stuck here: http://snag.gy/A8xNW.jpg I am at total loss on what to do now. Any ideas?! Also thanks to all that have tried to help me over the last two weeks or so. Quote Link to comment
peter_sm Posted December 25, 2015 Share Posted December 25, 2015 I got the same error! have google this error.... It has to do with the graphics driver.... maybe some new kext that do this ? //Peter Quote Link to comment
peter_sm Posted December 25, 2015 Share Posted December 25, 2015 Looking for a shine Desktop ? please try these 2 files that are attached copy these 2 /Library/ColorSync/Profiles/ In System Preferences, click on Displays, and then on the Color button at the top. The two new profiles are “SuperCal-1” and “Color LCD Setyhg” and you will see them listed. I think SuperCal profile looks the best. //Peter ICC_COLOR_PROFILES.zip Quote Link to comment
GreenEyedMonster Posted December 27, 2015 Share Posted December 27, 2015 I got the same error! have google this error.... It has to do with the graphics driver.... maybe some new kext that do this ? //Peter How does this look? npci=0x3000 PCIRoot=0 PCIRootUID=1 cpus=1 maxmem=2048 USBBusFix=Yes nv_disable=1 GraphicsEnabler=No IGPEnabler=No "Graphics Mode"="1024x768x32@60" UseKernelCache=No -v About the only thing I found. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.