got it working thru a free one  ---  FreeVPN.me --- it is slow, but I was just wanting to get a test thru. 

Hey lads. Just looking for a bit of help. Was talking to binhex about this but I'm still having this problem. Basically I cant get deluge to delete my torrents after the download is complete. Pic of settings below.

 

Also when I try to delete the torrents 100% of the time if I delete more than 3 at a time deluge will crash and require a restart to come back. If i delete them 1 by 1 it will eventually crash and come back on its own and a very odd time require a restart.

Your share ratio limit is -0.9, try a positive number?

Hello Everyone,

 

I have tried everything to get this to work but i can not access the webgui. I have tried every setting that i can think of, my network settings are correct. Other docker apps run fine. I have went as far as deleting my docker image and starting fresh, that did not help

 

Here is log file:

 

[info] Env var PUID defined as 99

[info] Env var PGID defined as 100

[info] Setting permissions recursively on /config...

[info] Starting Supervisor...

2016-03-05 11:40:12,023 CRIT Set uid to user 0

2016-03-05 11:40:12,023 WARN Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing

2016-03-05 11:40:12,027 INFO supervisord started with pid 15

2016-03-05 11:40:13,031 INFO spawned: 'privoxy' with pid 18

2016-03-05 11:40:13,035 INFO spawned: 'start' with pid 19

2016-03-05 11:40:13,039 INFO spawned: 'webui' with pid 20

2016-03-05 11:40:13,042 INFO spawned: 'deluge' with pid 21

2016-03-05 11:40:13,047 DEBG 'privoxy' stdout output:

[info] VPN is enabled, checking VPN tunnel local ip is valid

[info] checking VPN tunnel local ip is valid...

 

2016-03-05 11:40:13,047 INFO success: privoxy entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2016-03-05 11:40:13,047 INFO success: start entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2016-03-05 11:40:13,056 DEBG 'deluge' stdout output:

[info] VPN enabled, configuring Deluge...

[info] checking VPN tunnel local ip is valid...

 

2016-03-05 11:40:13,061 DEBG 'start' stdout output:

[info] VPN is enabled, beginning configuration of VPN

 

2016-03-05 11:40:13,063 DEBG 'start' stderr output:

chmod: cannot access '/config/openvpn/*': No such file or directory

 

2016-03-05 11:40:13,083 DEBG 'start' stdout output:

[info] VPN provider defined as pia|airvpn|custom

 

2016-03-05 11:40:13,084 DEBG 'start' stdout output:

[crit] Missing OpenVPN configuration file in /config/openvpn/ (no files with an ovpn extension exist) please create and restart delugevpn

 

2016-03-05 11:40:13,085 DEBG fd 14 closed, stopped monitoring (stderr)>

2016-03-05 11:40:13,085 DEBG fd 9 closed, stopped monitoring (stdout)>

2016-03-05 11:40:13,085 INFO exited: start (exit status 1; not expected)

2016-03-05 11:40:13,086 DEBG received SIGCLD indicating a child quit

2016-03-05 11:40:14,088 INFO success: webui entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)

2016-03-05 11:40:14,088 INFO success: deluge entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)

 

Thanks

I have tried everything to get this to work but i can not access the webgui.

If you disable the VPN does it work? If so, you do not have your VPN set up correctly. Follow the directions in the second post of this thread.

Your share ratio limit is -0.9, try a positive number?

 

this was just recommended by binhex. ill try it though

I  have mine set to 0.01

I have tried everything to get this to work but i can not access the webgui.

If you disable the VPN does it work? If so, you do not have your VPN set up correctly. Follow the directions in the second post of this thread.

 

Thanks, config my vpn and it worked great. Now i have another problem, i have my data location set to /mnt/usr/downloads but when i get into deluge it is pointing to /home/nobody/Downloads. If i set it to /mnt/usr/downloads i get a permission denied error??

 

Thanks

I have tried everything to get this to work but i can not access the webgui.

If you disable the VPN does it work? If so, you do not have your VPN set up correctly. Follow the directions in the second post of this thread.

 

Thanks, config my vpn and it worked great. Now i have another problem, i have my data location set to /mnt/usr/downloads but when i get into deluge it is pointing to /home/nobody/Downloads. If i set it to /mnt/usr/downloads i get a permission denied error??

 

Thanks

 

set it to /data it will send all the files to the share that you have set

I have tried everything to get this to work but i can not access the webgui.

If you disable the VPN does it work? If so, you do not have your VPN set up correctly. Follow the directions in the second post of this thread.

 

Thanks, config my vpn and it worked great. Now i have another problem, i have my data location set to /mnt/usr/downloads but when i get into deluge it is pointing to /home/nobody/Downloads. If i set it to /mnt/usr/downloads i get a permission denied error??

 

Thanks

Go into your unRAID server, and edit the deluge docker. Go to volume mappings and set "Container volume" to /data and "Host path" to /mnt/usr/downloads with read/write.

Then go into deluge and set the data location to /data

I  have mine set to 0.01

 

Unfortunately this doesnt seem to have worked.

I  have mine set to 0.01

 

Unfortunately this doesnt seem to have worked.

Deluge is slow to stop and delete torrents i think, try to let it stay over the night.

I have tried everything to get this to work but i can not access the webgui.

If you disable the VPN does it work? If so, you do not have your VPN set up correctly. Follow the directions in the second post of this thread.

 

Thanks, config my vpn and it worked great. Now i have another problem, i have my data location set to /mnt/usr/downloads but when i get into deluge it is pointing to /home/nobody/Downloads. If i set it to /mnt/usr/downloads i get a permission denied error??

 

Thanks

Go into your unRAID server, and edit the deluge docker. Go to volume mappings and set "Container volume" to /data and "Host path" to /mnt/usr/downloads with read/write.

Then go into deluge and set the data location to /data

 

That worked, have everything up and running. Using airvpn and maxing out my connection BOTH ways 100/10 Line

 

Thanks

I have tried everything to get this to work but i can not access the webgui.

If you disable the VPN does it work? If so, you do not have your VPN set up correctly. Follow the directions in the second post of this thread.

 

Thanks, config my vpn and it worked great. Now i have another problem, i have my data location set to /mnt/usr/downloads but when i get into deluge it is pointing to /home/nobody/Downloads. If i set it to /mnt/usr/downloads i get a permission denied error??

 

Thanks

Go into your unRAID server, and edit the deluge docker. Go to volume mappings and set "Container volume" to /data and "Host path" to /mnt/usr/downloads with read/write.

Then go into deluge and set the data location to /data

 

That worked, have everything up and running. Using airvpn and maxing out my connection BOTH ways 100/10 Line

 

Thanks

 

Should this not be /mnt/user/downloads ??

I have tried everything to get this to work but i can not access the webgui.

If you disable the VPN does it work? If so, you do not have your VPN set up correctly. Follow the directions in the second post of this thread.

 

Thanks, config my vpn and it worked great. Now i have another problem, i have my data location set to /mnt/usr/downloads but when i get into deluge it is pointing to /home/nobody/Downloads. If i set it to /mnt/usr/downloads i get a permission denied error??

 

Thanks

Go into your unRAID server, and edit the deluge docker. Go to volume mappings and set "Container volume" to /data and "Host path" to /mnt/usr/downloads with read/write.

Then go into deluge and set the data location to /data

 

That worked, have everything up and running. Using airvpn and maxing out my connection BOTH ways 100/10 Line

 

Thanks

 

Should this not be /mnt/user/downloads ??

Yes it should, misstype. Sorry 

Not just your typo tho!    cough Cion cough

Not just your typo tho!    cough Cion cough

Nope 

Not just your typo tho!    cough Cion cough

Nope 

 

Was in Midnight Commander when i was typing the reply and in there it is usr not user. Was trying to do to much at one time, got confused    lol

Hi.

Just started using unraid about a week ago..

And finally had delugevpn up and running a few days ago.

But have some speed problems.. It's jumping from 100kbit til a little over 1mbit in download speed.

And it's just jumping all the time, the speed is not stable.

 

Any tips??

 

Earlier I ran a VM with Windows 10, OpenVPN (connected to vpntunnel.se), and Vuze as client.

There I had a stable speed on about 2,2Mbit.

And I still download the same torrent (just shut down the VM, and added the magnet link to Deluge, and it found and checked the files, and continued to download the torrent).

Can you try a popular torrent? A Linux ISO file or something?

 

Post some screenshot, it is easier to help you then for other people

Hi.

Just started using unraid about a week ago..

And finally had delugevpn up and running a few days ago.

But have some speed problems.. It's jumping from 100kbit til a little over 1mbit in download speed.

And it's just jumping all the time, the speed is not stable.

 

Any tips??

 

Earlier I ran a VM with Windows 10, OpenVPN (connected to vpntunnel.se), and Vuze as client.

There I had a stable speed on about 2,2Mbit.

And I still download the same torrent (just shut down the VM, and added the magnet link to Deluge, and it found and checked the files, and continued to download the torrent).

What provider are you using? If it's not pia then you will have to manually set the incoming port otherwise speeds will be bad.

Hello

 

First time trying to get this working, but I am getting stuck on what I believe is some problem related to IPv6.

First some basic info:

 

Unraid version unRAIDServer-6.1.9-x86_64

 

The part I am getting stuck on is the following:

2016-03-11 01:51:22,017 DEBG 'start' stdout output:

Fri Mar 11 01:51:22 2016 /usr/bin/ip -6 addr add 2a03:8600:1001:4041::100f/64 dev tun0

 

2016-03-11 01:51:22,018 DEBG 'start' stderr output:

RTNETLINK answers: Operation not supported

 

2016-03-11 01:51:22,019 DEBG 'start' stdout output:

Fri Mar 11 01:51:22 2016 Linux ip -6 addr add failed: external program exited with error status: 2

Fri Mar 11 01:51:22 2016 Exiting due to fatal error

 

2016-03-11 01:51:22,027 DEBG fd 9 closed, stopped monitoring <POutputDispatcher at 46927913092448 for <Subprocess at 46927913091440 with name start in state RUNNING> (stdout)>

2016-03-11 01:51:22,027 DEBG fd 14 closed, stopped monitoring <POutputDispatcher at 46927913092880 for <Subprocess at 46927913091440 with name start in state RUNNING> (stderr)>

2016-03-11 01:51:22,028 INFO exited: start (exit status 1; not expected)

2016-03-11 01:51:22,028 DEBG received SIGCLD indicating a child quit

 

I'm gonna attach some pictures and the log aswell.

I'm afraid I dont know enough to get further here. It works when I disable VPN, but with it it doesnt work. I noticed that the new version of Unraid was quite new, but I dont know if this should play a role here or not.

 

Hmm, wasnt allowed to post more than 4 attachments, but the following is the settings in openvpn.ovpn:

client

dev tun

remote se.ovpn.azirevpn.net 1194

remote-random

resolv-retry infinite

auth-user-pass credentials.conf

nobind

persist-key

remote-cert-tls server

reneg-sec 0

keepalive 10 60

verb 3

 

cipher AES-256-CBC

auth SHA512

tls-cipher TLS-DHE-RSA-WITH-AES-256-CBC-SHA

 

setenv CLIENT_CERT 0

 

Any help is appreciated!

 

Attachments are to big so log in next post.

Logfile

supervisord.txt

You need to and a openvpn file if you dont use Pia.

I do have the open vpn file with the settings pasted above. Or am I miss understanding?