Squid Posted January 27, 2018 Share Posted January 27, 2018 On 1/22/2018 at 4:19 PM, CHBMB said: @dstanley Remind him in a couple of days, because I can guarantee I'll forget. Unlike you, I do not have the memory of a goldfish It also happens on Duplicati. Unfortunately, I ran out of containers with Updates available for them to continue testing. Best guess is to edit the template and remove the TemplateURL line from it (and then ignore the complaint that FCP will give) But, it is a hair weird as this doesn't seem to affect everything, and it's not the TemplateURL entry being present that causes it because then it would affect every container across the board. Quote Link to comment
dstanley Posted January 29, 2018 Share Posted January 29, 2018 I can't seem to determine what triggers the template to remove my '/mylar' added onto the WebUI address - it will work for a bit and then somehow revert to the original template address. Tried several things like removing the webui address - then adding it back in after a save - to editing the template file on the boot usb - nothing 'sticks' with the webui changed from: http://[IP]:[PORT:8090]/ to http://[IP]:[PORT:8090]/mylar as it always reverts (somehow/someway) to: http://[IP]:[PORT:8090]/ This is happening with these dockers on my system: Mylar Headphones Plexpy I cannot access these dockers locally through the Unraid webui as the trailing folder is being removed. I have the webui changed to make these dockers work with Let's Encrypt easiest and I do have them all working through that interface: http://(MyServer).com/mylar http://(MyServer).com/headphones http://(MyServer).com/plexpy Not a 'life-threatening' situation but a perplexing one ... Dwight Quote Link to comment
summerside1967 Posted January 30, 2018 Share Posted January 30, 2018 I'm new to unraid and docker, but not to mylar and Sabnzbd (used windows versions). I have Sabnzbd set up and working flawlessly with Sonarr and Radarr. The problem I am having with Mylar is simple (I hope). Following post processing I get a couple of errors. One is with Sabnzbd, after running the script, says post processing aborted. The Mylar log looks good with no errors, until it attempts to move the file form mylar/cache to the final comic directory. When I check the folders in the cache directory they are all read only (even thought the cache directory has full r-w for nobody. I'm stuck at this point because I cannot figure out how to stop Mylar for making these protected folders inside the cache while processing. I posted on the Mylar forum too (still waiting for a review of the logs). Hoping somebody here might have had similar issue? Thanks for the help Dave Quote Link to comment
CHBMB Posted January 30, 2018 Share Posted January 30, 2018 Docker run command for mylar and sabnzbd. Quote Link to comment
summerside1967 Posted January 31, 2018 Share Posted January 31, 2018 (edited) My setup: Intel NUC mini PC kit NUC7i7BNH, 3 Hard Drives (one internal and 2 external) Unraid 6.4.0 Docker Containers: Mylar - master git build 053626a96bd1a8601b2ca87066261408e8c1cd30 SABnzbd Radarr (no errors) Sonarr (no errors) Synology DS2413+ All media storage - with read/write permissions for all directories and files Used Unassigned Devices plugin Mylar and SABnzbd work together with no errors to grab and download the comic. The folder is created and the file is renamed then moved to the respective folder on the synology. The error happens when it tries to clean things up...delete the cache from the mylar directory and delte the file from sabnzbd completed folder. I've attached the Mylar verbose log, the run command for Mylar and Sabnzbd Mylar Run Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="mylar" --net="bridge" -e TZ="America/Regina" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -p 8090:8090/tcp -v "/mnt/disks/172.16.1.79_downloads/complete/":"/downloads":rw,slave -v "/mnt/disks/172.16.1.79_Comics/Comics/":"/comics":rw,slave -v "/mnt/cache/appdata/mylar":"/config":rw linuxserver/mylar 5557aa49c9de7ac3ef83e8aa682b2713e585df3b726ff821d67e22f75e0c7912 SABnzbd Run Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="sabnzbd" --net="bridge" -e TZ="America/Regina" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -p 8080:8080/tcp -p 9090:9090/tcp -v "/mnt/disks/172.16.1.79_downloads/complete/":"/downloads":rw,slave -v "/mnt/disks/172.16.1.79_downloads/incomplete/":"/incomplete-downloads":rw,slave -v "/mnt/cache/appdata/sabnzbd/scripts/":"/scripts":rw -v "/mnt/disks/172.16.1.79_eBooks/Calibre Library/":"/books":rw,slave -v "/mnt/disks/172.16.1.79_Comics/Comics/":"/comics":rw,slave -v "/mnt/cache/appdata/sabnzbd/":"/config":rw linuxserver/sabnzbd 54f56f61f391b25b4296f7d734c860dc0039082f9d61b63c076f61509d4b8314 Thanks for the help Dave Mylar Run Command.txt Mylar Verbose Log.txt SABNzbd Run Command.txt Edited January 31, 2018 by summerside1967 Quote Link to comment
frankthetank Posted January 31, 2018 Share Posted January 31, 2018 Can someone help me with my problem? I posted here over a week ago. I can't seem to get mylar to load a comic or download one. Sonarr and radarr work fine. I'm not sure what else to do. I've looked for help elsewhere, but to no avail. I've gone through the mylar settings multiple times to try to get it work. Any tips on what I do? Why am I having this problem? How do you guys setup your mylar? I will provide whatever details you need to narrow down this problem just let me know what to do. Other than the traceback call errors I get this error every time I attempt to add a comic from the 'This week' tab. I have searched this error and how to fix it, but I still get the error and no comics meta data loads. 2018-01-30 20:29:15 WARNING Error trying to validate/create directory. Aborting this process at this time. 2018-01-30 20:29:15 WARNING [DIRECTORY-CHECK] Could not create directory: /Comics/Image+ (2016)[[Errno 13] Permission denied: '/Comics']. Aborting. 2018-01-30 20:29:15 INFO [DIRECTORY-CHECK] Creating comic directory (0777) : /Comics/Image+ (2016) 2018-01-30 20:29:15 WARNING [DIRECTORY-CHECK] Could not find comic directory: /Comics/Image+ (2016) 2018-01-30 20:29:15 INFO Previous version detected as None - seeing if update required 2018-01-30 20:29:15 INFO Sucessfully retrieved details for Image+ 2018-01-30 20:29:15 INFO Now adding/updating: Image+ 2018-01-30 20:29:13 INFO Attempting to add directly by ComicVineID: 89936 Quote Link to comment
sparklyballs Posted January 31, 2018 Share Posted January 31, 2018 5 hours ago, frankthetank said: Can someone help me with my problem? I posted here over a week ago. I can't seem to get mylar to load a comic or download one. Sonarr and radarr work fine. I'm not sure what else to do. I've looked for help elsewhere, but to no avail. I've gone through the mylar settings multiple times to try to get it work. Any tips on what I do? Why am I having this problem? How do you guys setup your mylar? I will provide whatever details you need to narrow down this problem just let me know what to do. Other than the traceback call errors I get this error every time I attempt to add a comic from the 'This week' tab. I have searched this error and how to fix it, but I still get the error and no comics meta data loads. 2018-01-30 20:29:15 WARNING Error trying to validate/create directory. Aborting this process at this time. 2018-01-30 20:29:15 WARNING [DIRECTORY-CHECK] Could not create directory: /Comics/Image+ (2016)[[Errno 13] Permission denied: '/Comics']. Aborting. 2018-01-30 20:29:15 INFO [DIRECTORY-CHECK] Creating comic directory (0777) : /Comics/Image+ (2016) 2018-01-30 20:29:15 WARNING [DIRECTORY-CHECK] Could not find comic directory: /Comics/Image+ (2016) 2018-01-30 20:29:15 INFO Previous version detected as None - seeing if update required 2018-01-30 20:29:15 INFO Sucessfully retrieved details for Image+ 2018-01-30 20:29:15 INFO Now adding/updating: Image+ 2018-01-30 20:29:13 INFO Attempting to add directly by ComicVineID: 89936 /Comics is not the same as /comics in linux you need to use /comics Quote Link to comment
frankthetank Posted January 31, 2018 Share Posted January 31, 2018 I changed it to /comics and it seemed to fix my issue. It let me in to see get metadata and it downloaded a comic to test. Thanks for your help. Mylar downloaded the issue fine. Then, I had to tweak my categories setting in SABnzbd, because I had it set up wrong. It moved comics to an incorrect folder. I ended up manually deleting the test comic issue it downloaded previously, so I could start fresh. I made sure the recycle bin is empty. In mylar, I went to the issue I test downloaded, the Manage Failed Downloads, and any other settings I could fine to remove or set it back like I never owned it. Now when I check my logs it's spamming me with this a few hundred times a second, and I can't seem to get of it. 2018-01-31 10:18:30 INFO no file found where it should be @ /data/Media/Comics - is there another script that moves things after completion ? 2018-01-31 10:18:30 INFO found matching completed item in history. Job has a status of Completed 2018-01-31 10:18:30 INFO no file found where it should be @ /data/Media/Comics - is there another script that moves things after completion ? 2018-01-31 10:18:30 INFO found matching completed item in history. Job has a status of Completed 2018-01-31 10:18:30 INFO no file found where it should be @ /data/Media/Comics - is there another script that moves things after completion ? 2018-01-31 10:18:30 INFO found matching completed item in history. Job has a status of Completed Quote Link to comment
summerside1967 Posted February 1, 2018 Share Posted February 1, 2018 On 1/30/2018 at 6:18 PM, summerside1967 said: My setup: Intel NUC mini PC kit NUC7i7BNH, 3 Hard Drives (one internal and 2 external) Unraid 6.4.0 Docker Containers: Mylar - master git build 053626a96bd1a8601b2ca87066261408e8c1cd30 SABnzbd Radarr (no errors) Sonarr (no errors) Synology DS2413+ All media storage - with read/write permissions for all directories and files Used Unassigned Devices plugin Mylar and SABnzbd work together with no errors to grab and download the comic. The folder is created and the file is renamed then moved to the respective folder on the synology. The error happens when it tries to clean things up...delete the cache from the mylar directory and delte the file from sabnzbd completed folder. I've attached the Mylar verbose log, the run command for Mylar and Sabnzbd Mylar Run Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="mylar" --net="bridge" -e TZ="America/Regina" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -p 8090:8090/tcp -v "/mnt/disks/172.16.1.79_downloads/complete/":"/downloads":rw,slave -v "/mnt/disks/172.16.1.79_Comics/Comics/":"/comics":rw,slave -v "/mnt/cache/appdata/mylar":"/config":rw linuxserver/mylar 5557aa49c9de7ac3ef83e8aa682b2713e585df3b726ff821d67e22f75e0c7912 SABnzbd Run Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="sabnzbd" --net="bridge" -e TZ="America/Regina" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -p 8080:8080/tcp -p 9090:9090/tcp -v "/mnt/disks/172.16.1.79_downloads/complete/":"/downloads":rw,slave -v "/mnt/disks/172.16.1.79_downloads/incomplete/":"/incomplete-downloads":rw,slave -v "/mnt/cache/appdata/sabnzbd/scripts/":"/scripts":rw -v "/mnt/disks/172.16.1.79_eBooks/Calibre Library/":"/books":rw,slave -v "/mnt/disks/172.16.1.79_Comics/Comics/":"/comics":rw,slave -v "/mnt/cache/appdata/sabnzbd/":"/config":rw linuxserver/sabnzbd 54f56f61f391b25b4296f7d734c860dc0039082f9d61b63c076f61509d4b8314 Thanks for the help Dave Mylar Run Command.txt Mylar Verbose Log.txt SABNzbd Run Command.txt Anyone have any thoughts or ideas? This is the only issue with the install and I can't figure it out....thanks again Quote Link to comment
frankthetank Posted February 1, 2018 Share Posted February 1, 2018 In SAB I get this error while trying to use a script. I'm not sure why it doesn't have permission. Does anyone know why? ERROR a few seconds ago Python script "/data/Media/sabscripts/ComicRN.py" does not have execute (+x) permission set Also, I in mylar my logs keep getting spammed with this hundreds of times per second. I have to clear my logs after it reaches a couple million lines. Is there some way I can stop this? rebooting/restarting doesn't seem to work. Thanks 2018-02-01 15:16:33 INFO found matching completed item in history. Job has a status of Completed 2018-02-01 15:16:33 INFO no file found where it should be @ /data/Media/Comics - is there another script that moves things after completion ? Quote Link to comment
CHBMB Posted February 1, 2018 Share Posted February 1, 2018 Because it doesn't have execute permissions set? docker exec -it mylar bash chmod +x /data/Media/sabscripts/ComicRN.py Quote Link to comment
frankthetank Posted February 1, 2018 Share Posted February 1, 2018 23 minutes ago, CHBMB said: Because it doesn't have execute permissions set? docker exec -it mylar bash chmod +x /data/Media/sabscripts/ComicRN.py Thanks. That worked to clear the error. I did have to change the path because it had nothing existing there. Now, in Sabnzbd it is telling me this. /usr/bin/env: ‘python\r’: No such file or directory Quote Link to comment
summerside1967 Posted February 2, 2018 Share Posted February 2, 2018 20 hours ago, summerside1967 said: Anyone have any thoughts or ideas? This is the only issue with the install and I can't figure it out....thanks again Nothing? Quote Link to comment
CHBMB Posted February 2, 2018 Share Posted February 2, 2018 25 minutes ago, summerside1967 said: Nothing? You're going to have to look at the logs of what is going on. Quote Link to comment
summerside1967 Posted February 2, 2018 Share Posted February 2, 2018 (edited) Thanks. I did look at the logs. Everything is set up witt appropriate permissions. Mylar does exactly what it should (based on the settings I defined), but for some reason when it creates comic (inisde the cache directory) it makes it read only and will not delete (or clean up) after processing. There are not errors until the very end...I'm not sure why the folders inside the cache are being created with different permissions 2018-02-01 19:18:09 WARNING [POST-PROCESSING] Post-Processing ABORTED 2018-02-01 19:18:09 WARNING [POST-PROCESSING] Failed to move /config/mylar/cache/mylar_kp9ceY/All-New Wolverine 012 (2016) (Digital) (BlackManta-Empire).cbz - check directories and manually re-run. Edited February 2, 2018 by summerside1967 Quote Link to comment
CHBMB Posted February 2, 2018 Share Posted February 2, 2018 Thanks. I did look at the logs. Everything is set up witt appropriate permissions. Mylar does exactly what it should (based on the settings I defined), but for some reason when it creates comic (inisde the cache directory) it makes it read only and will not delete (or clean up) after processing. There are not errors until the very end...I'm not sure why the folders inside the cache are being created with different permissions 2018-02-01 19:18:09 WARNING [post-PROCESSING] Post-Processing ABORTED 2018-02-01 19:18:09 WARNING [post-PROCESSING] Failed to move /config/mylar/cache/mylar_kp9ceY/All-New Wolverine 012 (2016) (Digital) (BlackManta-Empire).cbz - check directories and manually re-run. You have mylar set up incorrectly sabnzbd has no access to mylar's /config directory.Sent from my LG-H815 using Tapatalk Quote Link to comment
summerside1967 Posted February 2, 2018 Share Posted February 2, 2018 5 hours ago, CHBMB said: You have mylar set up incorrectly sabnzbd has no access to mylar's /config directory. Sent from my LG-H815 using Tapatalk Where in Mylar's settings do i give sabnzbd access to mylar's /config directory? Quote Link to comment
CHBMB Posted February 2, 2018 Share Posted February 2, 2018 Where in Mylar's settings do i give sabnzbd access to mylar's /config directory?You don't, you setup Mylar so stuff isn't put into /config, instead put into /downloadsSent from my LG-H815 using Tapatalk Quote Link to comment
summerside1967 Posted February 2, 2018 Share Posted February 2, 2018 8 minutes ago, CHBMB said: You don't, you setup Mylar so stuff isn't put into /config, instead put into /downloads Sent from my LG-H815 using Tapatalk I was told in the mylar forum that Mylar does the renaming and metadata in temporary folders in the cache, then deletes the files after it moves. Quote Link to comment
summerside1967 Posted February 2, 2018 Share Posted February 2, 2018 7 minutes ago, summerside1967 said: I was told in the mylar forum that Mylar does the renaming and metadata in temporary folders in the cache, then deletes the files after it moves. So how would I config Mylar from not using the cache? Quote Link to comment
CHBMB Posted February 2, 2018 Share Posted February 2, 2018 So how would I config Mylar from not using the cache?I don't know I don't use Mylar, might even be sabnzbd that needs configuring, but something is telling something to put files in /config and the other container consequently can't find it.Sent from my LG-H815 using Tapatalk Quote Link to comment
summerside1967 Posted February 2, 2018 Share Posted February 2, 2018 7 minutes ago, CHBMB said: I don't know I don't use Mylar, might even be sabnzbd that needs configuring, but something is telling something to put files in /config and the other container consequently can't find it. Sent from my LG-H815 using Tapatalk Sabnzbd finds it. Mylar for some reason changes permissions of the temporary files it creates in the cache (Mylar cache folder has the correct permissions) if you don't use Mylar then how can you answer questions under the Mylar topic? Quote Link to comment
dstanley Posted February 2, 2018 Share Posted February 2, 2018 Make sure your Mylar is configured to watch your /download folder as shown. This folder should be the SAME folder that is specified as /download in your SABNZBd docker. Quote Link to comment
CHBMB Posted February 2, 2018 Share Posted February 2, 2018 Sabnzbd finds it. Mylar for some reason changes permissions of the temporary files it creates in the cache (Mylar cache folder has the correct permissions) if you don't use Mylar then how can you answer questions under the Mylar topic? Well, in general docker problems are 99% caused by issues with the end user configuration, and I can see that is your issue from the info and logs posted so far, I use Linux on my server and desktop, and I use docker a lot, and I'm a member of the group that publishes this container, so I'm pretty knowledgeable on those counts, and nobody else was offering any help, but you're right I can only point you to the probable issues not spoon feed you the solution, so if my help isn't valued, I'll refrain from answering.Sent from my LG-H815 using Tapatalk 1 Quote Link to comment
dstanley Posted February 2, 2018 Share Posted February 2, 2018 @CHBMB Please let that comment go and ignore it - your presence here and your guidance has been invaluable to me over the past year or so - I would NOT have got my system to the point it is now without reading your posts and benefiting from your generosity. @summerside1967 I suggest you approach your request for aid with a little more patience and respect - I have both Sabnzbd and Mylar running perfectly on my system and I will help you if I can. Enclosed are screen shots of my docker configurations for both - please study these and see if they help - the /downloads location MUST be identical in both container settings 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.