Uirel Posted December 29, 2016 Share Posted December 29, 2016 (edited) Application Name: Watcher Application Site: https://github.com/nosmokingbandit/watcher3 Docker Hub: https://hub.docker.com/r/uirel/watcher/ Github: https://github.com/Poag/watcher Reverse Proxy To put Watcher behind a reverse proxy you need to edit the following settings in the config.cfg [Proxy] behindproxy = true webroot = /watcher In your nginx default site conf location /watcher/ { proxy_pass http://<local-ip>:9090/watcher/; } Note Please be aware that the Watcher application is very new, under heavy development and some functions are a bit funky. If you have problems getting the docker setup correctly on your system please let us know below. However if you are having issues with the application itself, please refer to the Application site above. As indicated by CHBMB below, the application writer is still writing the core aspects of this application and as such may be reluctant to support Docker users at this time, especially as this is a UNraid container, rather than the 'official' Watcher container. Edited April 27, 2021 by Uirel Quote Link to comment
squirrellydw Posted December 30, 2016 Share Posted December 30, 2016 haven't had a chance to install and test it out yet but how well does it work? Quote Link to comment
ashman70 Posted December 31, 2016 Share Posted December 31, 2016 I've installed and configured it, looks great so far, a notification setting would be a welcomed addition, by email would be easy. Quote Link to comment
ashman70 Posted December 31, 2016 Share Posted December 31, 2016 So I seem to have encountered a problem, perhaps a bug, not sure. When I click on two films that are indicated as 'found' my screen goes grey, if i click again it takes me back to the Watcher screen where I see my films, and I can click on any of the other films with the status 'wanted' just these two with the status 'found' produce the problem. I have tried restarting the Watcher server from inside the app itself and in unRAID by restarting the docker, neither does anything to resolve the issue, nor does there appear to be a way to remove the two films with the status 'found'. My version of Watcher is: Current version hash: 7d15c88 Quote Link to comment
goblinhunter Posted January 1, 2017 Share Posted January 1, 2017 I've just updated to the new Docker image, and for some reason when I use my local NZBHydra server as a provider, searches are showing no results in Watcher. I can see from the logs that it is hitting my server, and results are being returned by NZBHydra, but Watcher doesn't seem to use them: INFO 2017-01-01 05:35:33,973 core.newznab.search_all: SEARCHING: http://nzbhydraurl:8008/api?apikey=APIKEY&t=movie&imdbid=movieid INFO 2017-01-01 05:35:39,071 core.sqldb.get_search_results: Retreving Search Results for ttmovieid INFO 2017-01-01 05:35:39,075 core.sqldb.get_movie_details: Retreving details for ttmovieid. INFO 2017-01-01 05:35:39,079 core.sqldb.get_marked_results: Retreving Marked Results for ttmovieid. INFO 2017-01-01 05:35:39,081 core.sqldb.get_distinct: Getting distinct values for ttmovieid in SEARCHRESULTS INFO 2017-01-01 05:35:39,083 core.updatestatus.movie_status: Setting MOVIES ttmovieid status to Wanted. INFO 2017-01-01 05:35:39,084 core.sqldb.update: Updating ttmovieidto Wanted in MOVIES. If I configure it to talk directly to a third party indexer, it does then show things as found, however I then hit the blank screen issue others have logged. Quote Link to comment
gspott Posted January 1, 2017 Share Posted January 1, 2017 Any torrent support in the future? I dont like Couchpotato Quote Link to comment
CHBMB Posted January 1, 2017 Share Posted January 1, 2017 Why don't you all post these issues on the github site for the app? Docker is a way of PACKAGING applications. Posting bug reports and questions here will get you nowhere. We've been testing an ls.io docker version of this application, and quite frankly, it's still in heavy development and buggy as hell, as you're all discovering and for that reason we haven't released it. Incidentally, the author also won't be interested once you say you're running in a docker container either, as he doesn't support it. We've actually spoken to him about some changes to enable our docker to be configured a little better but right now he's not too interested, likely because he's still concentrating on the core app stuff. Quote Link to comment
gestrella Posted January 1, 2017 Share Posted January 1, 2017 There is also a group in reddit too for the app - https://www.reddit.com/r/watcher/ Quote Link to comment
squirrellydw Posted January 1, 2017 Share Posted January 1, 2017 Why don't you all post these issues on the github site for the app? Docker is a way of PACKAGING applications. Posting bug reports and questions here will get you nowhere. We've been testing an ls.io docker version of this application, and quite frankly, it's still in heavy development and buggy as hell, as you're all discovering and for that reason we haven't released it. Incidentally, the author also won't be interested once you say you're running in a docker container either, as he doesn't support it. We've actually spoken to him about some changes to enable our docker to be configured a little better but right now he's not too interested. Good to know, didn't know you were testing and working on it. Quote Link to comment
kri kri Posted January 6, 2017 Share Posted January 6, 2017 Can someone help me with settings this up? I am looking for the nzbget script, and also wondering what paths I should use for the post-processing. I couldn't find the script under the appdata folder, should I just download the zip file from github? My docker paths are: /config /mnt/user/appdata/Watcher /downloads /mnt/cache/downloads/ /movies /mnt/user/media/movies/ Quote Link to comment
j123ss Posted January 8, 2017 Share Posted January 8, 2017 Can someone help me with settings this up? I am looking for the nzbget script, and also wondering what paths I should use for the post-processing. I couldn't find the script under the appdata folder, should I just download the zip file from github? My docker paths are: /config /mnt/user/appdata/Watcher /downloads /mnt/cache/downloads/ /movies /mnt/user/media/movies/ The post-processing script is found on the github repo. You must create your own folder and add it there Quote Link to comment
Uirel Posted January 9, 2017 Author Share Posted January 9, 2017 Can someone help me with settings this up? I am looking for the nzbget script, and also wondering what paths I should use for the post-processing. I couldn't find the script under the appdata folder, should I just download the zip file from github? My docker paths are: /config /mnt/user/appdata/Watcher /downloads /mnt/cache/downloads/ /movies /mnt/user/media/movies/ I've updated the docker with a change that drops a scripts folder into your /config mapping. If you edit the prepackaged scripts save them with a new name else they'll get overwritten. Quote Link to comment
kri kri Posted January 9, 2017 Share Posted January 9, 2017 Thank you - could I also get some help on getting the post-processor to work? I am not seeing anything relevant in my log file. I have a couple of movies that nzbget downloaded and are just sitting in my downloads folder. My downloads folder is now: /mnt/cache/downloads/Watcher and has been updated in the Watcher docker config as well. Cheers. Quote Link to comment
Uirel Posted January 9, 2017 Author Share Posted January 9, 2017 Thank you - could I also get some help on getting the post-processor to work? I am not seeing anything relevant in my log file. I have a couple of movies that nzbget downloaded and are just sitting in my downloads folder. My downloads folder is now: /mnt/cache/downloads/Watcher and has been updated in the Watcher docker config as well. Cheers. So my Watcher /downloads folder matches my nzbget /downloads folder in this case /mnt/cache/downloads From the scripts folder (in your config dir) take the nzbget/sab py file and put it into nzbget/sab pp scripts folder, call it with the movies category. That triggers watcher to move the files into the correct location. Dont forget to set your post processing options in watcher. Quote Link to comment
PanteraGSTK Posted March 28, 2017 Share Posted March 28, 2017 This seems to be a good alternative to couchpotato, but I see that there is a new version of watcher, but it doesn't seem that this docker has been updated. Thanks for setting this docker up. Watcher is not ready for prime time, but I like where it is heading. Quote Link to comment
PanteraGSTK Posted March 29, 2017 Share Posted March 29, 2017 This notice popped up today. Quote Link to comment
Uirel Posted March 30, 2017 Author Share Posted March 30, 2017 I've updated the docker to pull from the new watcher3 repo. Assuming no other changes things should be ok. (Also updated dependencies to python3) Quote Link to comment
avpap Posted January 18, 2018 Share Posted January 18, 2018 I just found out about this app and as I have wanted to migrate from couchpotato, I installed it immediately. I have configured deluge (connection test ok), but when I try to download a release, I get "unable to get download path". Any ideas? Quote Link to comment
DazedAndConfused Posted November 3, 2019 Share Posted November 3, 2019 Hi Uriel, looks like the main repo is inactive now. Someone forked the project and have been actively adding updates at https://github.com/barbequesauce/Watcher3 How do I go about switching the docker over to this repo? Or is that someone you need to do on your end? Quote Link to comment
includenull Posted November 7, 2019 Share Posted November 7, 2019 I would also very much like to see this updated to use the barbequesauce version. Quote Link to comment
Uirel Posted November 7, 2019 Author Share Posted November 7, 2019 Hi All, I've branched the watcher docker and updated it with the BBQSauce repo for tetsing. I'm afraid i dont use watcher anymore myself so i can't test it aside from the huild process. As such, if you would like to test it, please append you docker image path with :test eg-uirel/watcher:test and let me know how you get on. If all works well i'll merge it into the main branch and everyone will get the update -Uirel Quote Link to comment
cbr600ds2 Posted April 26, 2021 Share Posted April 26, 2021 is this a dead docker? I really hate radarr Quote Link to comment
Uirel Posted April 27, 2021 Author Share Posted April 27, 2021 On 4/26/2021 at 1:30 AM, cbr600ds2 said: is this a dead docker? I really hate radarr HI, Im afraid i'm no longer maintaining this container. It also appears that watcher3 itself is no longer being maintained 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.