Jump to content
lionceau

Anybody planning a Ryzen build?

1136 posts in this topic Last Reply

Recommended Posts

First I run on a asrock Fatal1ty X470 Gaming-ITXac. Run without issues.

About 2 months ago I moved it to ROG-STRIX-X470-F-GAMING-ASUS-5220 atx as I wanted more slots for GPUs. Also running without issues. 

I currently have 52 dockers running, my daily driver vm (archlinux) with passtrough and a few other vms (windows, mac, mint) with passthrough as well. 

All working fine and stable.

Share this post


Link to post
3 minutes ago, juan11perez said:

First I run on a asrock Fatal1ty X470 Gaming-ITXac. Run without issues.

About 2 months ago I moved it to ROG-STRIX-X470-F-GAMING-ASUS-5220 atx as I wanted more slots for GPUs. Also running without issues. 

I currently have 52 dockers running, my daily driver vm (archlinux) with passtrough and a few other vms (windows, mac, mint) with passthrough as well. 

All working fine and stable.

52 Dockers on a 8c16t - do you cpu pin for Dockers and VM?

 

I have a 3900x and I'm curious on how your Dockers perform? I have about 10 Dockers running, and a w10 VM with you passthrough and seems I run out of cores... Lol

Share this post


Link to post

no cpu pinning. 

I use the vm settings interface to limit the vms to use cores from 4 upwards. Trying to ensure 0/1 and 2/3 are free for unraid.

 

The dockers run fine. I use homeassitant with all the associated services plus the other usual stuff. See snapshot. 

 

 

dockers.thumb.png.776f0a7ff618c337024560fd7396b696.png

Share this post


Link to post
3 minutes ago, juan11perez said:

no cpu pinning. 

I use the vm settings interface to limit the vms to use cores from 4 upwards. Trying to ensure 0/1 and 2/3 are free for unraid.

 

The dockers run fine. I use homeassitant with all the associated services plus the other usual stuff. See snapshot. 

 

 

dockers.thumb.png.776f0a7ff618c337024560fd7396b696.png

So you are sharing your 3-8cores with your VM and Dockers, interesting!

Share this post


Link to post
1 hour ago, emuhack said:

52 Dockers on a 8c16t - do you cpu pin for Dockers and VM?

 

I have a 3900x and I'm curious on how your Dockers perform? I have about 10 Dockers running, and a w10 VM with you passthrough and seems I run out of cores... Lol

That is highly depending on what Docker containers you are running, you can give a 3900x hell with only 2 containers or can use a 1600x with 120 containers fine. Its just application virtualization, that can be done very heavy on load or very slim, very good and very bad,  also everyone can do an image, there is experience factor in it. What 10 containers/images are you running?

Share this post


Link to post
9 minutes ago, jammsen said:

That is highly depending on what Docker containers you are running, you can give a 3900x hell with only 2 containers or can use a 1600x with 120 containers fine. Its just application virtualization, that can be done very heavy on load or very slim, very good and very bad,  also everyone can do an image, there is experience factor in it. What 10 containers/images are you running?

Understood... Below are my containers (I have some off that i dont use on a daily)

 

image.png.f03aa717b15c98cb5dca125fa4b92820.png

 

I have a dell poweredge that is running hyper-v for my domain and such, im thinking of "unraiding" it -- i had plex docker and it was HORRIBLY slow on the 3900x -- but i may be limiting it by pinning. I may share the love if i unraid the other server to run my low end containers on that and use this as my powerhouse server, i have learned alot in the past 2 months since i started with unraid and would have done things slighly different this time around :)

Share this post


Link to post

I have run radarr, sonarr and tautulli, thoose are fine, the other ones i've never used and dont know them. Keep in mind that deep app virtualization over/with massive Java containers like Firefox Chrome FileZilla and stuff, chew through ram like a beast and are prone to have the same flaws/errors like the desktop counterparts, wrong expension, wrong webside, weird tracking javascripts running or massive open tabs will use up quite some I/O, CPU and RAM. Please always remember even the "BEST BEAST HARDWARE" with Layer1 or 2 or app virtualization can loose to some weird stuff and not perform like you want it to :)

Share this post


Link to post
2 hours ago, juan11perez said:

no cpu pinning. 

I use the vm settings interface to limit the vms to use cores from 4 upwards. Trying to ensure 0/1 and 2/3 are free for unraid.

 

The dockers run fine. I use homeassitant with all the associated services plus the other usual stuff. See snapshot. 

 

 

dockers.thumb.png.776f0a7ff618c337024560fd7396b696.png

Wow.

 

Do we need to stage an intervention on your significant other's behalf? 😁

 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.