untraceablez Posted April 26, 2021 Share Posted April 26, 2021 (edited) Great container, the interface is very nice, got my Wasabi account linked flawlessly. That being said, encountering a couple issues: 1.) Has anyone tried backing up all system files from / excluding some shares in /mnt and /storage? All the errors I'm getting are permission denied errors, even though the container is assigned /storage as / and it's running at a privileged level. I suppose this isn't necessary and I could get away with just backing up /flash 2.) I can't expand the /mnt folder to selectively backup my /appdata folder. The whole container hangs. I assume this is due to the downloads and media library folders there. Is there anyway to manually specify the path and not have to use the GUI there, or am I just screwed trying to backup anything under /mnt? Edited April 26, 2021 by untraceablez clarity/aesthetics Quote Link to comment
Djoss Posted May 17, 2021 Author Share Posted May 17, 2021 On 4/26/2021 at 12:55 PM, untraceablez said: Great container, the interface is very nice, got my Wasabi account linked flawlessly. That being said, encountering a couple issues: 1.) Has anyone tried backing up all system files from / excluding some shares in /mnt and /storage? All the errors I'm getting are permission denied errors, even though the container is assigned /storage as / and it's running at a privileged level. I suppose this isn't necessary and I could get away with just backing up /flash 2.) I can't expand the /mnt folder to selectively backup my /appdata folder. The whole container hangs. I assume this is due to the downloads and media library folders there. Is there anyway to manually specify the path and not have to use the GUI there, or am I just screwed trying to backup anything under /mnt? I'm not sure to understand how you mapped folders from the host to the container. Can you share your container settings ? Quote Link to comment
BKS Posted July 13, 2021 Share Posted July 13, 2021 Documentation seems to reference a master password reset function, but I'm not seeing it. How do I reset if I locked myself out of Cloudberry Web UI? Quote Link to comment
Djoss Posted July 14, 2021 Author Share Posted July 14, 2021 13 hours ago, BKS said: Documentation seems to reference a master password reset function, but I'm not seeing it. How do I reset if I locked myself out of Cloudberry Web UI? Which documentation are you talking about ? Quote Link to comment
djroomba Posted August 17, 2021 Share Posted August 17, 2021 How do you update? Currently my Cloudberry Backup version is 3.1.3.17, and 3.2.0.114 is available. When I check for updates in Unraid, it says it’s up-to-date. I have tried updating from within Cloudberry and it downloads the file but then hangs when trying to install. Any advice? 1 Quote Link to comment
tezgno Posted September 9, 2021 Share Posted September 9, 2021 I just installed this docker with the default settings. For some reason, the /storage does not show up under the GUI for me to select. I know that it is mounted because when I go to create a backup target and choose filesystem, I can clearly see that /storage is there and points to /mnt/user. However, it doesn't show in the GUI. If I change it from /mnt/user to, say, /mnt, it does show up, but user is missing (it shows cache and disk, etc, but not user). Anyone else experiencing that? Quote Link to comment
Djoss Posted September 9, 2021 Author Share Posted September 9, 2021 7 hours ago, tezgno said: I just installed this docker with the default settings. For some reason, the /storage does not show up under the GUI for me to select. I know that it is mounted because when I go to create a backup target and choose filesystem, I can clearly see that /storage is there and points to /mnt/user. However, it doesn't show in the GUI. If I change it from /mnt/user to, say, /mnt, it does show up, but user is missing (it shows cache and disk, etc, but not user). Anyone else experiencing that? Can you share a screenshot of what you are seeing? Quote Link to comment
tezgno Posted September 9, 2021 Share Posted September 9, 2021 3 hours ago, Djoss said: Can you share a screenshot of what you are seeing? Sure, As you can see, storage is completely missing even though it is mapped to /mnt/user. If I change it to anything other than /mnt/user, it shows up. Quote Link to comment
Sunsparc Posted September 23, 2021 Share Posted September 23, 2021 Unable to activate the software for Home use. It either says Activation failed or key is invalid. Quote Link to comment
VladoPortos Posted October 11, 2021 Share Posted October 11, 2021 On 9/9/2021 at 6:17 PM, tezgno said: Sure, As you can see, storage is completely missing even though it is mapped to /mnt/user. If I change it to anything other than /mnt/user, it shows up. Same issue with mine, did you solve it ? Quote Link to comment
tezgno Posted October 11, 2021 Share Posted October 11, 2021 8 hours ago, VladoPortos said: Same issue with mine, did you solve it ? No, I was not able to get it resolved. I decided to use Duplicacy. It's cheaper, doesn't have the same limitations, and thus far, has worked (even did a restore with it and it worked fine). Quote Link to comment
VladoPortos Posted October 12, 2021 Share Posted October 12, 2021 11 hours ago, tezgno said: No, I was not able to get it resolved. I decided to use Duplicacy. It's cheaper, doesn't have the same limitations, and thus far, has worked (even did a restore with it and it worked fine). I'm not sure what happened, it was working before and i had good experience with Cloudbeery to the point I did bought a personal license for it... but suddenly the mounted disks vanished from source of backup UI. I kind of solved it by mounting my unassigned backup drive to the docker container under /drive this was picked up ok... then I added another path /mnt/user and in container under /drive/user this also worked... so it does look a bit stupid inside container, but it works at least... I might have a second look at duplicacy.... Quote Link to comment
tezgno Posted October 12, 2021 Share Posted October 12, 2021 6 hours ago, VladoPortos said: I'm not sure what happened, it was working before and i had good experience with Cloudbeery to the point I did bought a personal license for it... but suddenly the mounted disks vanished from source of backup UI. I kind of solved it by mounting my unassigned backup drive to the docker container under /drive this was picked up ok... then I added another path /mnt/user and in container under /drive/user this also worked... so it does look a bit stupid inside container, but it works at least... I might have a second look at duplicacy.... I did give something similar a try to and it was not able to work the minute I select /mnt/user. I suspect that it may have been permissions related, but I'm not sure there either. Duplicacy thus far has worked really well. I used to use Duplicati, but the failure rate of it was too much to bare. Thus far, Duplicacy has worked really well. I do find that it produces slightly larger backups, but I feel that much of that can be controlled with higher compression settings if it became an issue. 1 Quote Link to comment
DragDom Posted November 4, 2021 Share Posted November 4, 2021 While running a backup My docker.img becomes 80% up to 99% full. It is 40GB. I did not change any of the default settings. Does anyone have any thoughts on why it is filling up. As soon as I stop the backup it clears up. Not sure what is causing this. Any help is appreciated. Quote Link to comment
trurl Posted November 4, 2021 Share Posted November 4, 2021 17 minutes ago, DragDom said: While running a backup My docker.img becomes 80% up to 99% full. It is 40GB. I did not change any of the default settings. Does anyone have any thoughts on why it is filling up. As soon as I stop the backup it clears up. Not sure what is causing this. Any help is appreciated. Did you check out the video linked in the listing for this on the Apps page? I mentioned it in your other thread, here it is: Quote Link to comment
trurl Posted November 4, 2021 Share Posted November 4, 2021 24 minutes ago, DragDom said: While running a backup My docker.img becomes 80% up to 99% full. It is 40GB. I did not change any of the default settings. Does anyone have any thoughts on why it is filling up. As soon as I stop the backup it clears up. Not sure what is causing this. Any help is appreciated. 4 minutes ago, trurl said: in your other thread Here is a link to that other (now locked) thread, since the user already supplied more information there than they did in this new post in the support thread: Quote Link to comment
Djoss Posted November 4, 2021 Author Share Posted November 4, 2021 I'm not aware of an issue where the container would write outside /config... When you see the docker image is filling up, you can check where the container is writing stuff. First, login to the container: docker exec -ti CloudBerryBackup sh And run the following commands: add-pkg coreutils du -h -d1 --exclude /storage --exclude /proc --exclude /sys / Quote Link to comment
DragDom Posted November 4, 2021 Share Posted November 4, 2021 54 minutes ago, trurl said: Did you check out the video linked in the listing for this on the Apps page? I mentioned it in your other thread, here it is: This is the video that I followed. He never mentions anything about the docker.img. Just the access to the shares and that is it. Quote Link to comment
DragDom Posted November 4, 2021 Share Posted November 4, 2021 38 minutes ago, Djoss said: I'm not aware of an issue where the container would write outside /config... When you see the docker image is filling up, you can check where the container is writing stuff. First, login to the container: docker exec -ti CloudBerryBackup sh And run the following commands: add-pkg coreutils du -h -d1 --exclude /storage --exclude /proc --exclude /sys / Here is what I get after running the commands. 33G is in the directory / /tmp # add-pkg coreutils fetch http://dl-cdn.alpinelinux.org/alpine/v3.9/main/x86_64/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/v3.9/community/x86_64/APKINDEX.tar.gz (1/3) Installing libattr (2.4.47-r7) (2/3) Installing libacl (2.2.52-r5) (3/3) Installing coreutils (8.30-r0) Executing busybox-1.29.3-r10.trigger Executing glibc-ldconfig-trigger-1.0-r0.trigger OK: 75 MiB in 123 packages /tmp # du -h -d1 --exclude /storage --exclude /proc --exclude /sys / 6.4M /bin 0 /dev 2.5M /etc 0 /home 5.7M /lib 0 /media 0 /mnt 139M /opt 4.0K /root 292K /run 592K /sbin 0 /srv 33G /tmp 80M /usr 36K /var 4.0K /lib64 84K /libexec 36K /defaults 68M /config 33G / /tmp # Quote Link to comment
Djoss Posted November 4, 2021 Author Share Posted November 4, 2021 The problem is under /tmp: 55 minutes ago, DragDom said: 33G /tmp What do you have under this directory? du -h /tmp Quote Link to comment
DragDom Posted November 4, 2021 Share Posted November 4, 2021 13 minutes ago, Djoss said: The problem is under /tmp: What do you have under this directory? du -h /tmp To me it looks like the backup is writing data in /tmp I am assume it is a log of what the backup is doing. Quote Link to comment
DragDom Posted November 5, 2021 Share Posted November 5, 2021 3 hours ago, DragDom said: To me it looks like the backup is writing data in /tmp I am assume it is a log of what the backup is doing. Also When I stop running the backup plan the /tmp size shrinks to nothing. I can not seem to figure out how to stop this from happening. Quote Link to comment
Djoss Posted November 7, 2021 Author Share Posted November 7, 2021 Are you using multiple backup plans ? Quote Link to comment
ksignorini Posted November 9, 2021 Share Posted November 9, 2021 I've had some conversations with 360MSP regarding weird behaviour and they've instructed me to update to the latest version of their software. Are there any plans to update the Docker image to use 3.2.3.148? Am I able to update the software in the Docker myself somehow? Thanks. Quote Link to comment
ksignorini Posted November 10, 2021 Share Posted November 10, 2021 I also have another weird issue where I map another path from the host to the docker and rather than showing up where it's supposed to, it shows up separated? in the list (subdirectories listed rather than located at mapped location in docker). However, when doing backups from these paths, they show the right path... very weird. (In this case, I'm backing up some disk images so I've mapped in my /mnt/disks/ path so I can pick some stuff there. These are non-array disks.) They should be mapped into /storage_disks but end up being listed separated (vm, vmfast, vmfast2, vmfast3). But when backing up, show correctly: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.