Djoss Posted December 10, 2022 Author Share Posted December 10, 2022 2 hours ago, PlanetDyna said: Is there a possibility to add my second Unraid server via FTPS under "Backup Source"? I want the Unraid server running CloudBerry to have read-only access. To my knowledge CloudBerry Backup does not support FTP as a backup source. Only files from the local filesystem. Quote Link to comment
PlanetDyna Posted December 10, 2022 Share Posted December 10, 2022 Maybe I can mount it manual? For me it is a security risk if the CloudBerry server has write permissions to the second server. How do you do it? Quote Link to comment
Djoss Posted December 10, 2022 Author Share Posted December 10, 2022 I'm sure there is a way... you may have more suggestions by asking somewhere else in the forum. If you are using the free license of CloudBerry Backup, could you run it also on your second server ? Quote Link to comment
wicked_qa Posted December 12, 2022 Share Posted December 12, 2022 On 11/27/2022 at 1:27 PM, michaelben said: I've got an issue configuring CloudBerry on Unraid. When I run CloudBerry, the "storage" folder - the main folder to backup is missing from the GUI. One peculiarity is that I previously ran docker on BTRFS image (about a year ago), and CloudBerry was working fine. I switched to XFS because I was having some other issues with the image, and CloudBerry stopped working - that is, there is nothing to backup. I tested today and temporarily switched to a new BTRFS docker image, and everything started showing up again! However, I am reluctant to switch to BTRFS permanently unless absolutely necessary to get Cloudberry to work. Why would it work fine with btrfs but not with xfs image?? Is this permission related issue (I don't change any file permissions, just switch docker image over from my docker.img to docker-xfs.img... If so, how can I fix it? I'm having the same issue since I switched to XFS. Have you managed to find a solution? Quote Link to comment
Djoss Posted December 12, 2022 Author Share Posted December 12, 2022 On 12/6/2022 at 1:54 AM, michaelben said: Is there anything I can do to adjust mounts permissions etc besides changing the docker image type?? 33 minutes ago, wicked_qa said: I'm having the same issue since I switched to XFS. Have you managed to find a solution? You should probably try to contact CloudBerry support about this. No need to indicate that you are using a Docker container. Just tell that the root folder "/" is missing from the Backup source. Quote Link to comment
PlanetDyna Posted December 12, 2022 Share Posted December 12, 2022 (edited) On 12/10/2022 at 6:52 PM, Djoss said: If you are using the free license of CloudBerry Backup, could you run it also on your second server ? I got the commercial version. I can run it on my two unraid servers. Why Iam asking to mount FTPS share: I got the problem on the 2nd Unraid Server that it crashes when adding more than one SMB share. But I guess the solution will be a root share. What is the advantage of CloudBerry vs LuckyBackup? Edited December 12, 2022 by PlanetDyna Quote Link to comment
michaelben Posted December 14, 2022 Share Posted December 14, 2022 On 12/13/2022 at 12:20 AM, Djoss said: You should probably try to contact CloudBerry support about this. No need to indicate that you are using a Docker container. Just tell that the root folder "/" is missing from the Backup source. I did that 6 months ago and didn't go anywhere... what about the fact that it works fine under BTRFS and not under XFS? Isn't that the underlying issue? How would CloudBerry support address this if they don't know I'm running in docker? Quote Link to comment
Djoss Posted December 14, 2022 Author Share Posted December 14, 2022 (edited) 2 hours ago, michaelben said: I did that 6 months ago and didn't go anywhere... what about the fact that it works fine under BTRFS and not under XFS? Isn't that the underlying issue? The mount type for "/" is different in both cases. Since CloudBerry Backup seems to work by mount point, it is possible that it doesn't recognize it. Under XFS, can you try to run "docker exec CloudBerryBackup mount" ? 2 hours ago, michaelben said: How would CloudBerry support address this if they don't know I'm running in docker? From the app's point of view, it's not really important if it is running in a container or not. However, support might be quick to close your case by answering that running in a container is not officially supported. Edited December 14, 2022 by Djoss Quote Link to comment
michaelben Posted December 14, 2022 Share Posted December 14, 2022 9 hours ago, Djoss said: The mount type for "/" is different in both cases. Since CloudBerry Backup seems to work by mount point, it is possible that it doesn't recognize it. Under XFS, can you try to run "docker exec CloudBerryBackup mount" ? /storage is definitely there when I'm in the container console, but not in the GUI. "mount" command doesn't change anything, it looks already mounted /tmp # df -h Filesystem Size Used Available Use% Mounted on overlay 50.0G 29.9G 20.0G 60% / tmpfs 64.0M 0 64.0M 0% /dev tmpfs 31.4G 0 31.4G 0% /sys/fs/cgroup shm 64.0M 0 64.0M 0% /dev/shm shfs 50.9T 38.2T 12.8T 75% /storage shfs 931.1G 350.2G 580.9G 38% /config /dev/loop2 50.0G 29.9G 20.0G 60% /etc/resolv.conf /dev/loop2 50.0G 29.9G 20.0G 60% /etc/hostname /dev/loop2 50.0G 29.9G 20.0G 60% /etc/hosts Quote Link to comment
Djoss Posted December 14, 2022 Author Share Posted December 14, 2022 3 minutes ago, michaelben said: "mount" command doesn't change anything, it looks already mounted Yes sorry, I wanted to see the output of the command. Quote Link to comment
michaelben Posted December 15, 2022 Share Posted December 15, 2022 (edited) 7 hours ago, Djoss said: Yes sorry, I wanted to see the output of the command. / # mount / # Edited December 15, 2022 by michaelben Quote Link to comment
michaelben Posted December 15, 2022 Share Posted December 15, 2022 Also, is there a reason that the /storage folder has different owner and permissions to every other? Does this matter? / # ls -al total 12 drwxr-xr-x 1 root root 91 Dec 13 02:02 . drwxr-xr-x 1 root root 91 Dec 13 02:02 .. -rwxr-xr-x 1 root root 0 Dec 13 02:02 .dockerenv drwxr-xr-x 1 root root 17 Dec 12 10:43 bin drwxrwxrwx 1 app app 101 Dec 11 02:03 config drwxr-xr-x 1 root root 27 Dec 12 10:29 defaults drwxr-xr-x 16 root root 4080 Dec 15 09:39 dev drwxr-xr-x 1 root root 47 Dec 15 09:39 etc drwxr-xr-x 2 root root 6 Nov 12 05:03 home -rwxr-xr-x 1 root root 6145 Dec 11 07:54 init drwxr-xr-x 1 root root 17 Dec 11 07:55 lib drwxr-xr-x 5 root root 44 Nov 12 05:03 media drwxr-xr-x 2 root root 6 Nov 12 05:03 mnt drwxr-xr-x 1 root root 19 Dec 12 10:29 opt dr-xr-xr-x 861 root root 0 Dec 15 09:39 proc drwxr-xr-x 1 root root 26 Dec 15 09:38 root drwxr-xr-x 1 root root 30 Dec 13 02:02 run drwxr-xr-x 1 root root 163 Dec 11 07:55 sbin drwxr-xr-x 2 root root 6 Nov 12 05:03 srv -rwxr-xr-x 1 root root 231 Dec 12 10:42 startapp.sh drwxrwxrwx 1 app app 117 Dec 11 04:30 storage dr-xr-xr-x 13 root root 0 Dec 15 09:39 sys drwxrwxrwt 1 root root 136 Dec 15 09:39 tmp drwxr-xr-x 1 root root 19 Dec 12 10:42 usr drwxr-xr-x 1 root root 17 Nov 12 05:03 var Quote Link to comment
Djoss Posted December 15, 2022 Author Share Posted December 15, 2022 6 hours ago, michaelben said: / # mount / # Humm this command should output something... Did you run "docker exec CloudBerryBackup mount" ? Quote Link to comment
Djoss Posted December 15, 2022 Author Share Posted December 15, 2022 6 hours ago, michaelben said: Also, is there a reason that the /storage folder has different owner and permissions to every other? Does this matter? This is expected. /storage is a different mount mapped to /mnt/user in unRAID. Other files and folders are from the Docker image itself. Quote Link to comment
Steve Croft Posted December 17, 2022 Share Posted December 17, 2022 On 12/10/2022 at 8:55 AM, Djoss said: Can you try to run the following command to verify if you see the same problem: docker run --rm jlesage/cloudberry-backup I'm seeing an identical issue on Unraid 6.11.5. Tried re-installing the docker, restarting the server - didn't resolve. Running the above command works, however not an ideal long term fix to enter the terminal manually whenever it fails to start. Any ideas? Quote Link to comment
Djoss Posted December 20, 2022 Author Share Posted December 20, 2022 On 12/17/2022 at 5:37 PM, Steve Croft said: I'm seeing an identical issue on Unraid 6.11.5. Tried re-installing the docker, restarting the server - didn't resolve. Running the above command works, however not an ideal long term fix to enter the terminal manually whenever it fails to start. Any ideas? Which issue exactly you are referring to ? Quote Link to comment
michaelben Posted December 20, 2022 Share Posted December 20, 2022 On 12/16/2022 at 12:25 AM, Djoss said: Humm this command should output something... Did you run "docker exec CloudBerryBackup mount" ? Yep... root@Unraid:/# docker exec CloudBerryBackup mount root@Unraid:/# root@Unraid:/# Quote Link to comment
Urbanpixels Posted December 22, 2022 Share Posted December 22, 2022 I've been in touch with Cloudberry support the last 2 weeks about the issue of local storage backup failing with a cloud limit error. Although they didnt say why or how they did reproduce the error and have fixed it apparantly. Quote While we will be investigating your current issue you can update your backup agent to the latest version. We released it (v. 4.0.2.402) yesterday and initial problem that you were experiencing with CBF plans to local destinations should be fixed. So you should be running your old backup plans without issues after the update. Quote Since updating to 4.0.1.310 my local storage backup is no longer working. I get the below error: Cloud object size limit exceeded (code: 1618) 1 file was not backed up due to a cloud object size limit excess - 5.37 GB Im running the personal licence and have never seen this error before, i also cannot find error 1618 in any of the cloudberry documentation. Additionally i have the same backup set running to a Backblaze bucket and this completes fine. The issue only appears to be on my local storage. Quote Link to comment
Djoss Posted December 23, 2022 Author Share Posted December 23, 2022 Ok, the Docker image has been updated with this new version! 1 Quote Link to comment
Steve Croft Posted December 27, 2022 Share Posted December 27, 2022 On 12/24/2022 at 2:33 AM, Djoss said: Ok, the Docker image has been updated with this new version! Legend thanks @Djoss, new image seems to have done the job Quote Link to comment
Deadringers Posted January 26, 2023 Share Posted January 26, 2023 Hi @Djoss, Thanks for your time on this so far! I'm just struggling with permissions on CloudBerry on restore. The container is able to read from my storage and back up those files without issue, but when I do a restore it fails with a permissions error. I tried to give all permissions with the following but no luck: chmod a+rwx /mnt/disk2/UNRAID_Backups/ Running the container with the "Privileged" switch to on did not help either. This is the location of where I store my app-data files using the app "CA Backup / Restore Appdata". So "CA Backup / Restore Appdata" writes to that directory, CloudBerry then backs it up to Backblaze, but Cloudberry is unable to then restore those files due to a permissions error. Any ideas? Quote Link to comment
Djoss Posted January 26, 2023 Author Share Posted January 26, 2023 By default the container has only read access to your data. When you want to restore, you need to change that. Edit the container's settings, toggle the "Advanced View" (upper right corner), then edit the "Storage" setting and change the "Access Mode" to "Read/Write". Quote Link to comment
Deadringers Posted January 26, 2023 Share Posted January 26, 2023 25 minutes ago, Djoss said: By default the container has only read access to your data. When you want to restore, you need to change that. Edit the container's settings, toggle the "Advanced View" (upper right corner), then edit the "Storage" setting and change the "Access Mode" to "Read/Write". ahh amazing thanks mate Quote Link to comment
FCA Administrator Posted February 13, 2023 Share Posted February 13, 2023 I must be missing something. My backups are incredibly slow, even just to a local external HDD, yes it's USB 3.0. 5 hours to backup about 500GB of data....and that's an incremental backup done shortly after a 12+ hour full backup was completed...on the weekend when no one is using the server. Any help would be very much appreciated! Quote Link to comment
Djoss Posted February 17, 2023 Author Share Posted February 17, 2023 On 2/13/2023 at 4:00 AM, FCA Administrator said: I must be missing something. My backups are incredibly slow, even just to a local external HDD, yes it's USB 3.0. 5 hours to backup about 500GB of data....and that's an incremental backup done shortly after a 12+ hour full backup was completed...on the weekend when no one is using the server. Any help would be very much appreciated! Does you backup have encryption, compression, etc enabled ? You could try to do a test by performing a backup to a non-USB HDD to see if you get the same speed. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.