LimeCenter Posted July 2, 2018 Share Posted July 2, 2018 (edited) Dear D. landon, Kindly we would like to express our thanks for the wonderfull work. The software is playing a keyrole in our company. As we are growing we have currently developed the need to register our time for the Dutch government more professionally. I was wondering if you or someone else had suggestions how software similar to Time-writer (http://www.timewriter.com) could be incorporated into owncloud. Is there software availble, apart form the excel? (I have found this time tracking software, but find a little difficult to understand how to incorporate it into ownCloud/unRAID: https://v2.kimai.org ) Edited July 2, 2018 by LimeCenter Quote Link to comment
LimeCenter Posted July 2, 2018 Share Posted July 2, 2018 Also I would like to ask what the easiest and correct way to update owncloud is to version to 10.0.8. Thank you in advance for your reply Quote Link to comment
dlandon Posted July 2, 2018 Author Share Posted July 2, 2018 7 hours ago, LimeCenter said: Dear D. landon, Kindly we would like to express our thanks for the wonderfull work. The software is playing a keyrole in our company. As we are growing we have currently developed the need to register our time for the Dutch government more professionally. I was wondering if you or someone else had suggestions how software similar to Time-writer (http://www.timewriter.com) could be incorporated into owncloud. Is there software availble, apart form the excel? (I have found this time tracking software, but find a little difficult to understand how to incorporate it into ownCloud/unRAID: https://v2.kimai.org ) Check app Marketplace to see if there is an app to do what you want. You will need an app built for ownCloud. You can't add anything onto ownCloud that is not a built app. Quote Link to comment
dlandon Posted July 2, 2018 Author Share Posted July 2, 2018 6 hours ago, LimeCenter said: Also I would like to ask what the easiest and correct way to update owncloud is to version to 10.0.8. Thank you in advance for your reply The best way to update is through the builtin ownCloud updater. It will not update though with a self signed certificate. I use a proper certificate and it is worth it just to be able to use the builtin ownCloud updater. Quote Link to comment
LimeCenter Posted July 4, 2018 Share Posted July 4, 2018 Dear dlandon, Kindly we like to thank you for your prompt reply. Before updating ownCloud it is recommended to back-up all data. I was wondering if the OwnBackup would be sufficient and how that all data (saved documents) could be retrieved when the update fails. On 6/3/2017 at 10:16 PM, dlandon said: It is recommended to install the 'OwnBackup' app to backup your databases on a schedule Quote Link to comment
LimeCenter Posted July 17, 2018 Share Posted July 17, 2018 Hello, The ownCloud folders I have is now regularly backed-up with Duplicati following this guide: https://www.youtube.com/watch?v=PBxY5Fna-MU However I was a little unsure how to make a back-up from the database... Does anyone have suggestions? Thank you in advance. Quote Link to comment
dlandon Posted July 19, 2018 Author Share Posted July 19, 2018 On 7/17/2018 at 11:14 AM, LimeCenter said: Hello, The ownCloud folders I have is now regularly backed-up with Duplicati following this guide: https://www.youtube.com/watch?v=PBxY5Fna-MU However I was a little unsure how to make a back-up from the database... Does anyone have suggestions? Thank you in advance. Look in the Market for the "OwnBackup" app. It backs up the databases on a schedule. Quote Link to comment
LimeCenter Posted July 20, 2018 Share Posted July 20, 2018 (edited) Problem Thank you very much for your prompt reply. The back-ups went successful and the upgrade semi-successful... I was presented with the following error: " Technical information ===================== The following list covers which files have failed the integrity check. Please read the previous linked documentation to learn more about the errors and how to fix them. Results ======= - core - INVALID_HASH - updater/vendor/autoload.php - updater/vendor/composer/autoload_real.php - updater/vendor/composer/autoload_static.php " Following the guidance of the admin manual: (https://doc.owncloud.org/server/10.0/admin_manual/issues/code_signing.html) I should 'Upload the correct “index.php” and “version.php” files from e.g. the archive of your ownCloud version' which in my case are the above 3 php files. However I had trouble finding the correct files that I could upload. I was wondering where I might find an archive of the 10.0.8 version of ownCloud or if there is another way to upload/restore these files; anyone suggestions? A solution: Install dlandon's ownCloud again on a different server B. Zip the folder 'vendor' in appdata/owncloud/www/owncloud/updater in server B Safe and/or transfer the file localy Shut down owncloud on server A Open the 'updater' folder in appdata/owncloud/www/owncloud on server A Delete 'vendor' folder in server A Unzip the the 'vendor' file in the 'updater' folder Start owncloud Under settings do a rescan and the warning should be solved. Edited July 22, 2018 by LimeCenter Quote Link to comment
LimeCenter Posted July 22, 2018 Share Posted July 22, 2018 (edited) Hello everyone, After updating I still received the following error: ownCloud,Server replied "403 Forbidden" to "MOVE https://blablabla.com/blabla Resolving the above problem seemed a good start however I did not obtain the wanted result. I tried to use the following guides however in case 1. I could not find the " installation-dir/.htaccess" folder under ownCloud and in case 2 I could not figure out if "repos" and "SELinux" were any relevant. The problem is fairly urgent so any suggestion is most welcome.https://central.owncloud.org/t/server-replied-forbidden-when-syncing/10617 https://forum.owncloud.org/viewtopic.php?t=36802 A solution: Disabling the anti-virus app. As soon as possible I will try to enable the anti-virus app but with a lot more caution. Edited July 24, 2018 by LimeCenter Found a solution to the issue Quote Link to comment
LimeCenter Posted July 31, 2018 Share Posted July 31, 2018 Hello, Right..... I deleted by mistake an address book containing a list of contacts. I tried to recover the contacts by going to Settings > Additional (under Admin) > OwnBackup where I then selected oc_dav_properties, oc_dav_shares, oc_cards, oc_cards_properties for a specific date. Then an error appeared (see below) with the issues that A. no contacts got back and second the list keeps on loading for minutes with no result. Has anyone suggestions how I could restore my contacts app and perhaps my contacts (I have a back-up in .cvf format)? Tables restored Table(s) could not be restored: Inserting data row failed: An exception occurred while executing 'INSERT INTO `oc_cards` (`id`,`addressbookid`,`carddata`,`uri`,`lastmodified`,`etag`,`size`) SELECT ?,?,?,?,?,?,? FROM `oc_cards` WHERE `id` = ? AND `addressbookid` = ? AND `carddata` = ? AND `uri` = ? AND `lastmodified` = ? AND `etag` = ? AND `size` = ? HAVING COUNT(*) = 0' with params ["1", "2", "BEGIN:VCARD\r\nVERSION:3.0\r\nPRODID:-\/\/Sabre\/\/Sabre VObject 4.1.2\/\/EN\r\nUID:username\r\nEMAIL:[email protected]\r\nCLOUD:username@baseurl.org\r\nPHOTO;ENCODING=b;TYPE=image\/png:iVBORw0KGgoAAAANSUhEUgAAAGAAAABgCAYAAADimHc\r\n Quote Link to comment
dlandon Posted August 12, 2018 Author Share Posted August 12, 2018 I have updated the docker image to install ownCloud 10.9.0 as the initial install. I have also set up the mariadb 10.3 stable repository so mariadb 10.3 it will be updated when the docker is started. When I tried to update my ownCloud to 10.9.0 using the built in updater, it did not handle the add on apps properly and got stuck in the maintenance mode. I ended up updating using the manual method in the second post of the thread. If you use a self-signed certificate, the built in updater won't work and you have to use the manual method. In any case, I recommend manually updating the docker in all cases. It's easy to roll back if the update fails because you make a copy of ownCloud before updating. Quote Link to comment
harshl Posted August 20, 2018 Share Posted August 20, 2018 After my Docker updated last night I am now seeing the following and the Docker won't start anymore, any ideas? Should I just blow the docker away and install fresh?: Processing triggers for mariadb-server-10.3 (1:10.3.8+maria~xenial) ... Failed to connect to bus: No such file or directory dpkg: error processing package mariadb-server-10.3 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: mariadb-server-10.3 E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. *** /etc/my_init.d/20_apt_update.sh failed with status 100 *** Killing all processes... Aug 20 02:24:33 1be32f7e3f9d syslog-ng[18]: syslog-ng shutting down; version='3.5.6' *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/05_set_the_time.sh... *** Running /etc/my_init.d/10_add_user_abc.sh... *** Running /etc/my_init.d/10_syslog-ng.init... Aug 20 16:24:24 1be32f7e3f9d syslog-ng[19]: syslog-ng starting up; version='3.5.6' Aug 20 16:24:25 1be32f7e3f9d syslog-ng[19]: EOF on control channel, closing connection; *** Running /etc/my_init.d/20_apt_update.sh... Get:1 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB] Hit:2 http://mirror.jaleco.com/mariadb/repo/10.3/ubuntu xenial InRelease Hit:4 http://ppa.launchpad.net/nginx/development/ubuntu xenial InRelease Get:6 http://security.ubuntu.com/ubuntu xenial-security/main Sources [162 kB] Get:7 http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease [23.9 kB] Hit:3 http://lon1.mirrors.digitalocean.com/ubuntu xenial InRelease Get:8 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [688 kB] Get:5 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates InRelease [109 kB] Get:9 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [465 kB] Get:10 http://ppa.launchpad.net/ondrej/php/ubuntu xenial/main amd64 Packages [67.6 kB] Get:11 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/main Sources [401 kB] Get:12 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/main amd64 Packages [1,073 kB] Get:13 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/universe amd64 Packages [876 kB] Fetched 3,972 kB in 6s (648 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. *** /etc/my_init.d/20_apt_update.sh failed with status 100 Thanks! Quote Link to comment
dlandon Posted August 21, 2018 Author Share Posted August 21, 2018 2 hours ago, harshl said: After my Docker updated last night I am now seeing the following and the Docker won't start anymore, any ideas? Should I just blow the docker away and install fresh?: Processing triggers for mariadb-server-10.3 (1:10.3.8+maria~xenial) ... Failed to connect to bus: No such file or directory dpkg: error processing package mariadb-server-10.3 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: mariadb-server-10.3 E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. *** /etc/my_init.d/20_apt_update.sh failed with status 100 *** Killing all processes... Aug 20 02:24:33 1be32f7e3f9d syslog-ng[18]: syslog-ng shutting down; version='3.5.6' *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/05_set_the_time.sh... *** Running /etc/my_init.d/10_add_user_abc.sh... *** Running /etc/my_init.d/10_syslog-ng.init... Aug 20 16:24:24 1be32f7e3f9d syslog-ng[19]: syslog-ng starting up; version='3.5.6' Aug 20 16:24:25 1be32f7e3f9d syslog-ng[19]: EOF on control channel, closing connection; *** Running /etc/my_init.d/20_apt_update.sh... Get:1 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB] Hit:2 http://mirror.jaleco.com/mariadb/repo/10.3/ubuntu xenial InRelease Hit:4 http://ppa.launchpad.net/nginx/development/ubuntu xenial InRelease Get:6 http://security.ubuntu.com/ubuntu xenial-security/main Sources [162 kB] Get:7 http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease [23.9 kB] Hit:3 http://lon1.mirrors.digitalocean.com/ubuntu xenial InRelease Get:8 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [688 kB] Get:5 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates InRelease [109 kB] Get:9 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [465 kB] Get:10 http://ppa.launchpad.net/ondrej/php/ubuntu xenial/main amd64 Packages [67.6 kB] Get:11 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/main Sources [401 kB] Get:12 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/main amd64 Packages [1,073 kB] Get:13 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/universe amd64 Packages [876 kB] Fetched 3,972 kB in 6s (648 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. *** /etc/my_init.d/20_apt_update.sh failed with status 100 Thanks! Probably the best thing to d is re-install the docker. I'll also take a look at why it is not updating. Quote Link to comment
harshl Posted August 21, 2018 Share Posted August 21, 2018 34 minutes ago, dlandon said: Probably the best thing to d is re-install the docker. I'll also take a look at why it is not updating. Seeing the same behavior after removing the docker and reinstalling it. Should I delete the appdata/owncloud folder as well and let my files re-sync? Processing triggers for libc-bin (2.23-0ubuntu10) ... Setting up mysql-common (1:10.3.9+maria~xenial) ... Setting up mariadb-common (1:10.3.9+maria~xenial) ... Processing triggers for libc-bin (2.23-0ubuntu10) ... Setting up mysql-common (1:10.3.9+maria~xenial) ... Setting up mariadb-common (1:10.3.9+maria~xenial) ... Processing triggers for mariadb-server-10.3 (1:10.3.8+maria~xenial) ... Failed to connect to bus: No such file or directory dpkg: error processing package mariadb-server-10.3 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: mariadb-server-10.3 E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. *** /etc/my_init.d/20_apt_update.sh failed with status 100 *** Killing all processes... Aug 20 19:47:17 0c3ea3e97fbf syslog-ng[48]: syslog-ng shutting down; version='3.5.6' Quote Link to comment
dlandon Posted August 21, 2018 Author Share Posted August 21, 2018 3 hours ago, harshl said: After my Docker updated last night I am now seeing the following and the Docker won't start anymore, any ideas? Should I just blow the docker away and install fresh?: Processing triggers for mariadb-server-10.3 (1:10.3.8+maria~xenial) ... Failed to connect to bus: No such file or directory dpkg: error processing package mariadb-server-10.3 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: mariadb-server-10.3 E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. *** /etc/my_init.d/20_apt_update.sh failed with status 100 *** Killing all processes... Aug 20 02:24:33 1be32f7e3f9d syslog-ng[18]: syslog-ng shutting down; version='3.5.6' *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/05_set_the_time.sh... *** Running /etc/my_init.d/10_add_user_abc.sh... *** Running /etc/my_init.d/10_syslog-ng.init... Aug 20 16:24:24 1be32f7e3f9d syslog-ng[19]: syslog-ng starting up; version='3.5.6' Aug 20 16:24:25 1be32f7e3f9d syslog-ng[19]: EOF on control channel, closing connection; *** Running /etc/my_init.d/20_apt_update.sh... Get:1 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB] Hit:2 http://mirror.jaleco.com/mariadb/repo/10.3/ubuntu xenial InRelease Hit:4 http://ppa.launchpad.net/nginx/development/ubuntu xenial InRelease Get:6 http://security.ubuntu.com/ubuntu xenial-security/main Sources [162 kB] Get:7 http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease [23.9 kB] Hit:3 http://lon1.mirrors.digitalocean.com/ubuntu xenial InRelease Get:8 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [688 kB] Get:5 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates InRelease [109 kB] Get:9 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [465 kB] Get:10 http://ppa.launchpad.net/ondrej/php/ubuntu xenial/main amd64 Packages [67.6 kB] Get:11 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/main Sources [401 kB] Get:12 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/main amd64 Packages [1,073 kB] Get:13 http://lon1.mirrors.digitalocean.com/ubuntu xenial-updates/universe amd64 Packages [876 kB] Fetched 3,972 kB in 6s (648 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-10.3 (>= 1:10.3.9+maria~xenial) but 1:10.3.8+maria~xenial is installed E: Unmet dependencies. Try using -f. *** /etc/my_init.d/20_apt_update.sh failed with status 100 Thanks! I have an update ready to fix this. Wait for it to build and then update. Quote Link to comment
harshl Posted August 21, 2018 Share Posted August 21, 2018 Just now, dlandon said: I have an update ready to fix this. Wait for it to build and then update. Your the best, thanks! Quote Link to comment
dlandon Posted October 11, 2018 Author Share Posted October 11, 2018 php 7.2 is fully supported in ownCloud 10.0.10. Right now the Docker is using php 7.1. Because of php 7.2 features, I may have to implement php 7.2 in the docker for later versions of ownCloud, The issue with this is that ownCloud versions below 10.0.10 may not operate any longer with php 7.2. You should be sure you have upgraded to 10.0.10 to be ready for the time when php 7.2 will be required. Quote Link to comment
harshl Posted October 13, 2018 Share Posted October 13, 2018 On 10/11/2018 at 5:45 PM, dlandon said: php 7.2 is fully supported in ownCloud 10.0.10. Right now the Docker is using php 7.1. Because of php 7.2 features, I may have to implement php 7.2 in the docker for later versions of ownCloud, The issue with this is that ownCloud versions below 10.0.10 may not operate any longer with php 7.2. You should be sure you have upgraded to 10.0.10 to be ready for the time when php 7.2 will be required. Thank you very much for the heads up. I will attempt an upgrade now, never done it before, fingers crossed! Quote Link to comment
lovingHDTV Posted October 25, 2018 Share Posted October 25, 2018 (edited) I'm moving over from gfjardim's docker. Is there a way to import the files I already have? Currently they are stored at /mnt/cache/apps/owncloud, the new install is /mnt/cache/appdata/ownCloud. I'd prefer to be able to copy the files then tell owncloud to scan and update the database? Is this possible? I see there is a files:scan command, but don't know how to run it in ownCloud. thanks david OK I figured out how to do this: open a docker console cd /cofig/www/owncloud in this directory you will see the file occ the owner of the config/config.php is abc sudo -u abc php occ files:scan <user to scan> works well. Edited October 25, 2018 by lovingHDTV Quote Link to comment
dlandon Posted October 25, 2018 Author Share Posted October 25, 2018 1 hour ago, lovingHDTV said: I'm moving over from gfjardim's docker. Is there a way to import the files I already have? Currently they are stored at /mnt/cache/apps/owncloud, the new install is /mnt/cache/appdata/ownCloud. I'd prefer to be able to copy the files then tell owncloud to scan and update the database? Is this possible? I see there is a files:scan command, but don't know how to run it in ownCloud. thanks david OK I figured out how to do this: open a docker console cd /cofig/www/owncloud in this directory you will see the file occ the owner of the config/config.php is abc sudo -u abc php occ files:scan <user to scan> works well. You can also add this to the ownCloud config.php file: 'filesystem_check_changes' => 1, This will do the same thing with all users. Quote Link to comment
lovingHDTV Posted October 25, 2018 Share Posted October 25, 2018 In your first post you say to change the timezone in base.php, but how do I do that? I see: if (!\date_default_timezone_set('UTC')) { \OC::$server->getLogger()->error('Could not set timezone to UTC'); }; Just don't know what to change? UTC-4? thanks again, david Quote Link to comment
PeterDKM Posted October 25, 2018 Share Posted October 25, 2018 Hi First of all thanx for the docker :) I really like there is a database built in. I just updated the docker and i will not start. Its in a endless loop of: 2018-10-25 20:04:46 0 [Note] InnoDB: Using Linux native AIO 2018-10-25 20:04:46 0 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2018-10-25 20:04:46 0 [Note] InnoDB: Uses event mutexes 2018-10-25 20:04:46 0 [Note] InnoDB: Compressed tables use zlib 1.2.8 2018-10-25 20:04:46 0 [Note] InnoDB: Number of pools: 1 2018-10-25 20:04:46 0 [Note] InnoDB: Using SSE2 crc32 instructions 2018-10-25 20:04:46 0 [Note] InnoDB: Initializing buffer pool, total size = 256M, instances = 1, chunk size = 128M 2018-10-25 20:04:46 0 [Note] InnoDB: Completed initialization of buffer pool 2018-10-25 20:04:46 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority(). 2018-10-25 20:04:46 0 [ERROR] InnoDB: Invalid redo log header checksum. 2018-10-25 20:04:46 0 [ERROR] InnoDB: Plugin initialization aborted with error Data structure corruption 2018-10-25 20:04:47 0 [Note] InnoDB: Starting shutdown... 2018-10-25 20:04:47 0 [ERROR] Plugin 'InnoDB' init function returned error. 2018-10-25 20:04:47 0 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 2018-10-25 20:04:47 0 [Note] Plugin 'FEEDBACK' is disabled. 2018-10-25 20:04:47 0 [ERROR] Unknown/unsupported storage engine: InnoDB 2018-10-25 20:04:47 0 [ERROR] Aborting I have attached the log file. What to do? I worked perfectly before i updated the docker :) 7b87806e00a3.err Quote Link to comment
dlandon Posted October 25, 2018 Author Share Posted October 25, 2018 1 hour ago, lovingHDTV said: In your first post you say to change the timezone in base.php, but how do I do that? I see: if (!\date_default_timezone_set('UTC')) { \OC::$server->getLogger()->error('Could not set timezone to UTC'); }; Just don't know what to change? UTC-4? thanks again, david That is not necessary. ownCloud manages the time zone. Quote Link to comment
dlandon Posted October 25, 2018 Author Share Posted October 25, 2018 24 minutes ago, PeterDKM said: Hi First of all thanx for the docker I really like there is a database built in. I just updated the docker and i will not start. Its in a endless loop of: 2018-10-25 20:04:46 0 [Note] InnoDB: Using Linux native AIO 2018-10-25 20:04:46 0 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2018-10-25 20:04:46 0 [Note] InnoDB: Uses event mutexes 2018-10-25 20:04:46 0 [Note] InnoDB: Compressed tables use zlib 1.2.8 2018-10-25 20:04:46 0 [Note] InnoDB: Number of pools: 1 2018-10-25 20:04:46 0 [Note] InnoDB: Using SSE2 crc32 instructions 2018-10-25 20:04:46 0 [Note] InnoDB: Initializing buffer pool, total size = 256M, instances = 1, chunk size = 128M 2018-10-25 20:04:46 0 [Note] InnoDB: Completed initialization of buffer pool 2018-10-25 20:04:46 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority(). 2018-10-25 20:04:46 0 [ERROR] InnoDB: Invalid redo log header checksum. 2018-10-25 20:04:46 0 [ERROR] InnoDB: Plugin initialization aborted with error Data structure corruption 2018-10-25 20:04:47 0 [Note] InnoDB: Starting shutdown... 2018-10-25 20:04:47 0 [ERROR] Plugin 'InnoDB' init function returned error. 2018-10-25 20:04:47 0 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 2018-10-25 20:04:47 0 [Note] Plugin 'FEEDBACK' is disabled. 2018-10-25 20:04:47 0 [ERROR] Unknown/unsupported storage engine: InnoDB 2018-10-25 20:04:47 0 [ERROR] Aborting I have attached the log file. What to do? I worked perfectly before i updated the docker 7b87806e00a3.err You just updated the docker today? Quote Link to comment
lovingHDTV Posted October 25, 2018 Share Posted October 25, 2018 Anyone use the owncloud Android App? this is the last thing I'm trying to get done. The only message I get is it failed to connect. I imagine there is some authentication thing I need to get setup but I don't get any message from the app. I tried connecting from a web browser, externally and it said something about adding to a trusted domain? thanks david Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.