thezyth Posted October 7, 2019 Share Posted October 7, 2019 Hey everyone, So I decided to downgrade my unraid server to a previous stable version through the webui and I haven't been able to get a ip address assigned to the server now. I have tried deleting the network.cfg file and booting up again but that didn't seem to work. I have attached the diagnostics file. Any help would be great! server-diagnostics-20190123-1836.zip Quote Link to comment
trurl Posted October 7, 2019 Share Posted October 7, 2019 Those diagnostics seem to indicate your server has the IP 192.168.0.25 Quote Link to comment
bonienl Posted October 7, 2019 Share Posted October 7, 2019 Those diagnostics are dated 23 january. Quote Link to comment
trurl Posted October 7, 2019 Share Posted October 7, 2019 Do you have an attached keyboard and monitor? Quote Link to comment
thezyth Posted October 7, 2019 Author Share Posted October 7, 2019 (edited) I can attach a keyboard and montior easily and pull up a newer diagnositc...i thought that was the newest. I went into gui and created one...hmmm let me do that again. Will update the post with new diagnostic. Edited October 7, 2019 by thezyth Quote Link to comment
JonathanM Posted October 7, 2019 Share Posted October 7, 2019 44 minutes ago, thezyth said: Will update the post with new diagnostic. Don't do that. We won't get notified if you update an existing post. Create a new post in this thread with the diagnostics attached. Quote Link to comment
thezyth Posted October 10, 2019 Author Share Posted October 10, 2019 Hey guys, Here is the updated diagnostics. I tried a few other things to maybe fix the issue but it didn't seem to work. Factory reset my router but that didn't help. diagnostics-20191010-2058.zip Quote Link to comment
John_M Posted October 10, 2019 Share Posted October 10, 2019 I see you have two 10Gb/s NICs but no others. They use the ixgbe driver, according to the lspci.txt file in your diagnostics but, according to the lsmod.txt file, it isn't loaded. Your syslog reports that device eth0 does not exist. Have you downgraded to a version that doesn't support your card? Quote Link to comment
thezyth Posted October 10, 2019 Author Share Posted October 10, 2019 (edited) Hmm that shouldnt be the case because I was on this version before and it worked perfectly fine. Both NICS are onboard. Edited October 10, 2019 by thezyth Quote Link to comment
John_M Posted October 10, 2019 Share Posted October 10, 2019 Try booting into safe mode then, just to eliminate plugins etc. It probably won't make any difference but it's worth a try. Do you have a gigabit card you could try? Quote Link to comment
thezyth Posted October 10, 2019 Author Share Posted October 10, 2019 Tried booting into safe mode just now and I got the same result. Quote Link to comment
John_M Posted October 10, 2019 Share Posted October 10, 2019 I took a look at your diagnostics from January. The ixgbe module is loading properly there - that was Unraid 6.6.6. Now (6.7.1) it isn't. Maybe something went wrong with the downgrade. Try copying the bz* files to your USB flash again. Can you manually load the module? modprobe ixgbe Quote Link to comment
thezyth Posted October 10, 2019 Author Share Posted October 10, 2019 So copy all the bz* files from here onto my flashdrive? Tried "modprobe ixgbe" but got could not insert error. I'm going to try and copy the bz files. Quote Link to comment
thezyth Posted October 10, 2019 Author Share Posted October 10, 2019 well replacing the bz files worked... Quote Link to comment
John_M Posted October 10, 2019 Share Posted October 10, 2019 Good. One of them must have become corrupt when you originally copied it. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.