vurt Posted December 30, 2019 Author Share Posted December 30, 2019 (edited) Ok, something new: I've not been able to access 192.168.1.252 nor tower.local in the web browser. Can ping, can't SSH. But I have SABnzbd running on unRAID and I can access it via 192.168.1.252:8080/sabnzbd/ and tower.local:8080/sabnzbd/ in my web browser. Trying 192.168.1.252:81 directs me to Nginx that I have running as a docker. If I tried 192.168.1.252:80 explicitly, I get the same unable to connect problem as 192.168.1.252. I thought maybe this is something wrong with the ISP-provided router ARRIS BGW210 (AT&T Fiber). But I had also plugged the unRAID box into my old router, hard-wired my laptop to the router, and also can't access the web gui. So I don't think it's a router issue. Looks like unRAID isn't responding to port 80 and the port 22 that SSH uses. Could something have happened within unRAID to disable those access? How can I check that? Doesn't explain how it was working fine previously and the missing array configuration. Edited December 30, 2019 by vurt Quote Link to comment
trurl Posted December 30, 2019 Share Posted December 30, 2019 1 hour ago, vurt said: I just received an email notification that Template URLs are missing: **** Template URL for docker application EmbyServer is missing. **** **** Template URL for docker application Rclone is missing. **** **** Template URL for docker application speedtest is missing. **** Your docker templates are stored on flash. Without those templates, you can't manage those dockers in the webUI. Quote Link to comment
vurt Posted December 30, 2019 Author Share Posted December 30, 2019 1 minute ago, trurl said: Your docker templates are stored on flash. Without those templates, you can't manage those dockers in the webUI. Ok ... but that's the least of my concerns right now 😕 Quote Link to comment
trurl Posted December 30, 2019 Share Posted December 30, 2019 Were you able to make any sort of backup of flash in your PC? Prepare flash as a new install and restore the config folder from your backup. Quote Link to comment
vurt Posted December 30, 2019 Author Share Posted December 30, 2019 Not yet. I jumped the gun and started the array hoping this weird network issue would resolve itself but it didn't. It's now 18% into the parity sync/data rebuild. I've looked through the Shares and have tried watching videos via Kodi, everything else seems to be running normally. When the parity sync is finished I'll do a nice shutdown and do the flash backup etc as you suggest. Even so, that's just kinda starting from scratch and restoring the config though. I still don't know nor understand why I suddenly can't access the web gui and SSH. Quote Link to comment
trurl Posted December 30, 2019 Share Posted December 30, 2019 It's pretty clear that something happened with your flash drive or your docker templates wouldn't be missing. Quote Link to comment
vurt Posted December 30, 2019 Author Share Posted December 30, 2019 Ah I see your point now, sorry for being so slow. You think there's a chance the flash drive is failing? Maybe I need to get a new one while I'm t it. Quote Link to comment
trurl Posted December 30, 2019 Share Posted December 30, 2019 If not failing, at least corrupted. You said you hadn't bothered to make a backup yet. Did you also not bother to checkdisk? Quote Link to comment
vurt Posted December 30, 2019 Author Share Posted December 30, 2019 Err no. I was anxious to get this up and running again. Quote Link to comment
vurt Posted December 30, 2019 Author Share Posted December 30, 2019 (edited) I checked the flash drive using Disk Utility and it gave me a exit code of 0 which suggests no errors were found. Backed up the flash drive and will proceed with a flash install. I had a look at the super.dat file in /config and I think it's corrupted. Noticed a super.old file dated Dec 10 which I think is when all this started. Does that file look normal? super.dat super.old Edited December 30, 2019 by vurt Quote Link to comment
vurt Posted December 30, 2019 Author Share Posted December 30, 2019 @trurl I did a fresh install, copied my old config over, and still couldn't access the web ui. However, I tried a fresh CLEAN install and can get into the web ui. Quote Link to comment
vurt Posted December 30, 2019 Author Share Posted December 30, 2019 (edited) I might've ascertained the culprit in ident.cfg as I compared the clean /config with my old /config to copy settings over: # Generated settings: NAME="Tower" timeZone="America/Los_Angeles" COMMENT="Media server" SECURITY="user" WORKGROUP="WORKGROUP" DOMAIN="" DOMAIN_SHORT="" hideDotFiles="no" localMaster="yes" enableFruit="no" USE_NTP="yes" NTP_SERVER1="pool.ntp.org" NTP_SERVER2="" NTP_SERVER3="" NTP_SERVER4="" DOMAIN_LOGIN="Administrator" DOMAIN_PASSWD="" SYS_MODEL="Custom" SYS_ARRAY_SLOTS="6" SYS_CACHE_SLOTS="1" USE_SSL="no" PORT="8099" PORTSSL="443" LOCAL_TLD="localj" BIND_MGT="no" USE_TELNET="no" PORTTELNET="23" USE_SSH="no" PORTSSH="22" START_PAGE="Main" Default ident.cfg has PORT="80" and USE_TELNET and USE_SSH values of "yes" while my old ident.cfg above had port 8099 and "no" which is weird since I never touched those. Edited December 30, 2019 by vurt Quote Link to comment
rojarrolla Posted October 29, 2021 Share Posted October 29, 2021 Hello to all, I have same issue, and some strange issues with my unraid. So, I would like to make a "clean" install again, but, I have many shares and data in the array and I don't want to loose any information. Is there a simple way to back it up to make the new install that recognizes drives, shares, network settings and dockers? Thanks! Quote Link to comment
ChatNoir Posted October 29, 2021 Share Posted October 29, 2021 4 hours ago, rojarrolla said: Hello to all, I have same issue, and some strange issues with my unraid. So, I would like to make a "clean" install again, but, I have many shares and data in the array and I don't want to loose any information. Is there a simple way to back it up to make the new install that recognizes drives, shares, network settings and dockers? Thanks! Hello, please create your own thread. While you may have the same symptoms, what you want to do is totally different from this one year old thread. Quote Link to comment
trurl Posted October 29, 2021 Share Posted October 29, 2021 10 hours ago, rojarrolla said: new install that recognizes drives, shares, network settings and dockers? Seems like everything you want to keep is exactly those things on your flash drive. A clean install with all of that is exactly what you already have. Unless you mean you want to get rid of all of the data on those disks that it recognizes. 5 hours ago, ChatNoir said: create your own thread. with a more complete description of your problems, and your diagnostics. Quote Link to comment
rojarrolla Posted November 9, 2021 Share Posted November 9, 2021 On 10/29/2021 at 2:50 AM, ChatNoir said: Hello, please create your own thread. While you may have the same symptoms, what you want to do is totally different from this one year old thread. OK. Let me see. On 10/29/2021 at 8:46 AM, trurl said: Seems like everything you want to keep is exactly those things on your flash drive. A clean install with all of that is exactly what you already have. Unless you mean you want to get rid of all of the data on those disks that it recognizes. with a more complete description of your problems, and your diagnostics. Yes I do want to keep all the data in those disks. However the Gui is making nonsense stufff. What I ended up doing is going back to 6.8 Version and now, it seems to be responding more, but, since I'm running some Rsyncs every night I will keep an eye on it hoping that 6.10 will be released soon... Is there any date yet? Thx. both. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.