8 hours ago, SimonF said:

Can you provide nvidia-smi -q -x

It's to much, I can't get the logs from the beginning

 

Edited March 12, 20251 yr by uCoreX

29 minutes ago, uCoreX said:

It's to much, I can't get the logs from the beginning

nvidia.txt 92.35 kB · 0 downloads

Fix will be available in 11a

32 minutes ago, 5STAR said:

Hey Gang,

 

I downloaded today's update the GPU Statistics and it says "Vendor command returned no data".  All GPU stats are non existent.  I have a nvideo P2200 and it's always worked.. any thoughts 

Fix will be available in 11a

OK all fixed with the released 2nd patch today.

I need to go back to the previous release as this release show no data whatsoever.

2nd patch still can't find vendor utility

Edited March 11, 20251 yr by Murderhobo

38 minutes ago, dlucent said:

I need to go back to the previous release as this release show no data whatsoever.

Are you on 11a?

44 minutes ago, Murderhobo said:

2nd patch still can't find vendor utility

Try ctrl + F5 Which os Vers?

 

Does nvidia-smi provide output?

I am on 11. Last WORKING version was 0301

Just now, dlucent said:

I am on 11. Last WORKING version was 0301

Install 11a

Done and appears to be working.  I shall test with a movie and popcorn ;=)

Thank you.

51 minutes ago, SimonF said:

Try ctrl + F5 Which os Vers?

 

Does nvidia-smi provide output?

 

On unraid 7.0.1 ofc and 11a

Edited March 11, 20251 yr by Murderhobo
added pic

i just updated to 11A and getting the same error. tried to use crtl F5 nope,  uninstalled and reinstalled and still have the issue

I'm on 7.0.1

root@Tower:~# nvidia-smi
Tue Mar 11 23:16:38 2025       
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 570.86.16              Driver Version: 570.86.16      CUDA Version: 12.8     |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                 Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp   Perf          Pwr:Usage/Cap |           Memory-Usage | GPU-Util  Compute M. |
|                                         |                        |               MIG M. |
|=========================================+========================+======================|
|   0  NVIDIA GeForce GTX 1650        Off |   00000000:0A:00.0 Off |                  N/A |
| 28%   42C    P8              9W /   75W |       3MiB /   4096MiB |      0%      Default |
|                                         |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                         
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU   GI   CI              PID   Type   Process name                        GPU Memory |
|        ID   ID                                                               Usage      |
|=========================================================================================|
|  No running processes found                                                             |
+-----------------------------------------------------------------------------------------+

 

Edited March 12, 20251 yr by pmuscat

8 hours ago, SimonF said:

Fix will be available in 11a

Thanks for the fix, It is working fine now

4 hours ago, pmuscat said:

i just updated to 11A and getting the same error. tried to use crtl F5 nope,  uninstalled and reinstalled and still have the issue

I'm on 7.0.1

root@Tower:~# nvidia-smi
Tue Mar 11 23:16:38 2025       
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 570.86.16              Driver Version: 570.86.16      CUDA Version: 12.8     |
|-----------------------------------------+------------------------+----------------------+
| GPU  Name                 Persistence-M | Bus-Id          Disp.A | Volatile Uncorr. ECC |
| Fan  Temp   Perf          Pwr:Usage/Cap |           Memory-Usage | GPU-Util  Compute M. |
|                                         |                        |               MIG M. |
|=========================================+========================+======================|
|   0  NVIDIA GeForce GTX 1650        Off |   00000000:0A:00.0 Off |                  N/A |
| 28%   42C    P8              9W /   75W |       3MiB /   4096MiB |      0%      Default |
|                                         |                        |                  N/A |
+-----------------------------------------+------------------------+----------------------+
                                                                                         
+-----------------------------------------------------------------------------------------+
| Processes:                                                                              |
|  GPU   GI   CI              PID   Type   Process name                        GPU Memory |
|        ID   ID                                                               Usage      |
|=========================================================================================|
|  No running processes found                                                             |
+-----------------------------------------------------------------------------------------+

 

Update to 2025.03.12

8 hours ago, Murderhobo said:

 

On unraid 7.0.1 ofc and 11a

Update to 2025.03.12

I just bought an Intel B580 Battlemage and am trying to get it recognized by Plex and Unraid as well. This is the cards I have in my server now. The GTX 1050 is just for GUI on a monitor purposes. However it is the only one Plex shows. 

I followed the rabbit hole and I am on Unraid 7.1 and I installed the 2025.03.12 version of the GPU Statistics

But nothing is working for the Arc B580.

I saw previously a call for volunteers. Reporting for duty as I need help.

1 minute ago, Coreybau said:

I just bought an Intel B580 Battlemage and am trying to get it recognized by Plex and Unraid as well. This is the cards I have in my server now. The GTX 1050 is just for GUI on a monitor purposes. However it is the only one Plex shows. 

I followed the rabbit hole and I am on Unraid 7.1 and I installed the 2025.03.12 version of the GPU Statistics

But nothing is working for the Arc B580.

I saw previously a call for volunteers. Reporting for duty as I need help.

What does lspci -k report for the B580, Not sure if you need to specify it is using the XE driver.

 

I am unfamiliar with what that is. So when in doubt type it in a console. I got what did look more familiar as a list of IMMOU. So I guess you are looking for this:

 

06:02.0 PCI bridge: Intel Corporation Device e2f1
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: pcieport
07:00.0 VGA compatible controller: Intel Corporation Battlemage G21 [Arc B580]
        Subsystem: Device 172f:4215
08:00.0 Audio device: Intel Corporation Device e2f7
        Subsystem: Device 172f:4215

 

Please let me know what you need.

2 hours ago, SimonF said:

Update to 2025.03.12

Works, you rock

5 hours ago, Coreybau said:

I am unfamiliar with what that is. So when in doubt type it in a console. I got what did look more familiar as a list of IMMOU. So I guess you are looking for this:

 

06:02.0 PCI bridge: Intel Corporation Device e2f1
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: pcieport
07:00.0 VGA compatible controller: Intel Corporation Battlemage G21 [Arc B580]
        Subsystem: Device 172f:4215
08:00.0 Audio device: Intel Corporation Device e2f7
        Subsystem: Device 172f:4215

 

Please let me know what you need.

Looks like we need to add the B580

 

lspci -nnks 07:00.0  which will provide out like this.

00:02.0 VGA compatible controller [0300]: Intel Corporation AlderLake-S GT1 [8086:4680] (rev 0c)
        DeviceName: Onboard - Video
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7d25]
        Kernel driver in use: i915
        Kernel modules: i915, xe

 

Then you need to create a file /boot/config/modprobe.d/xe.conf 

 

Add the part after :  in [] Intel Corporation AlderLake-S GT1 [8086:4680]
options xe force_probe=56a0,4680

 

I have two cards A770 + igpu but the 770 is not in the system at present. 56a0 is the A770.

 

Then you need to run, this would only once as would happen at boot.

 

modprobe -C /boot/config/modprobe.d/xe.conf xe

3 hours ago, Murderhobo said:

Works, you rock

Would you be able to create a temp file. i.e. nano /tmp/testgpu

 

Copy this code and save. then run php -f /tmp/gputest I think your pciid is 2d:00.0 change if wrong and let me have the results.

 

<? 
   function getKernelDriver(string $pciid) {
        $driver = '';
        echo "Check Link\n";
        if (is_link('/sys/bus/pci/devices/'.$pciid.'/driver')) {
            echo "is Link\n";
            $strLink = @readlink('/sys/bus/pci/devices/'.$pciid.'/driver');
            if (!empty($strLink)) {
                $driver = basename($strLink);
            } else { echo "Empty Link\n"; }
        }
        return $driver;
    }


echo getKernelDriver("0000:2d:00.0")."\n";
?>

 

On 3/11/2020 at 5:40 PM, b3rs3rk said:

Should be simple enough.  I will add it to the list of options I plan to implement in the next release.

 

EDIT:  It's been added.  Will be available when I release the next plugin version.  Default is Celsius but you can change it on the settings page.

Thank you for your hard work!  I hope they can support and promote this data to Dynamix System Statistics for long term retention someday soon!

The newest release (2025.03.12) addresses prior Intel XE issues and now displays XE information consistently, but it seems to experience flapping while transcoding video - the data display refreshing wipes out all the data then displays again repeatedly.  The flapping issue doesn't seem to occur while it's not transcoding but I didn't attempt other workloads or burden it to full load.  I'm running an A310, .7, 1.3, on 7.0 with Unraid Patch; nothing unusual.

Edit: I removed and reinstalled both apps, and restarted the relevant dockers.  The flapping has stopped, so this is likely a me issue, but there could be some cleanup needs for some users.

Edited March 12, 20251 yr by ixit
Updated outcome with remove/reinstall

So I create the file /boot/config/modprobe.d/xe.conf  usinf nano because the file isn't there. And all I add to the file is 

 

options xe force_probe=e20b

 

Just create the file and all I have in it is the above? Then run 

 

modprobe -C /boot/config/modprobe.d/xe.conf xe

 

Well I got a missing parameter error, looked at the -h and changed the -C to -c. Well then a whole lot of lines came out ending with:

 

alias symbol:zrl_add_impl zfs
alias symbol:zrl_remove zfs
alias symbol:zs_compact zsmalloc
alias symbol:zs_create_pool zsmalloc
alias symbol:zs_destroy_pool zsmalloc
alias symbol:zs_free zsmalloc
alias symbol:zs_get_total_pages zsmalloc
alias symbol:zs_huge_class_size zsmalloc
alias symbol:zs_lookup_class_index zsmalloc
alias symbol:zs_malloc zsmalloc
alias symbol:zs_map_object zsmalloc
alias symbol:zs_pool_stats zsmalloc
alias symbol:zs_unmap_object zsmalloc

 

But I am still getting:

 

Going to try a reboot. Back in a little while.