danimal86

I'm having a hard time getting my P2000 gpu to go into P8 mode from P0. I've read that adding "nvidia-persistenced" to the boot script will solve it. Cant find anything about how to do that. I'm on 6.9.1

I bet you guys have a response ready just by the titles (thanks for all you guys do) Freaking mover stopped at 27%, i think its the CA mover tuning app telling it to stop, i removed it.....seems to be working now.

So i have Appdata, domains, isus and system set to prefer downloads is set to Yes I plan to put it back to that once i reformat the cache....sound about right?

So i'm trying to reformat my cache to the new 1MiB format that gets rid of the excessive writes. Here's what i did: Dissabled dockers (dont use vm's, its off) set all shares to Cache: Yes When i run the mover, it doesn't move from 37%. I have the Mover Tuning app, and i even disabled it. When i look in the cache it still shows folders in there: Is there something new with 6.9.0 that i'm missing? I attached the logs from when the mover was going. I see in the Logs: DFTPCT LIMIT USED FOR SETTING: 85 Is this still the mover tuning app not allowing the mover to work since its not above the 85% threshold? Edit: I set the CA Mover Tuning App to: Only move at this threshold of used cache space: 0 % and now its working mover.txt

I changed the Vendor from Nvidia, to change me, and back to Nvidia and its working now

I just threw in a Quadro P2000, and i'm noticing that plex shows that it is transcoding, but no statistics are showing on the dashboard: This screenshot was with a video playing. Could an old mobo bios be the cause? here's what my app info looks like:

extended test finished. Says errors occurred. Anything stand out? tower-smart-20201003-1036.zip

Thanks. The rebuild finished and its back online. I've got it running an extended smart test right now.

Parity sync/data rebuild has started.

how do i know if the disk is fine?

Thought i'd check on the server since i did a case swap earlier this week and it ran a parity check on the 1st of the month. I have a red x next to Parity 2 disk. So far i've: Reboot - No change Re seated sata/power - No Change Swapped sata cables with a different one - No change Swapped power plugs with another disk - No change I did a diagnostic before and after i started troubleshooting, but i've ran out of ideas. I noticed there were some errors before i did the troubleshooting and now there are zero (i had 5 errors before that had been there for a while). tower-diagnostics-20201002-0950.zip tower-diagnostics-20201002-1033_Post Sata Power Swap.zip

I have CA Mover Tuning plugin initiate the mover at 95% full, so most of my current media stays on the cache. I just looked at a couple screenshots and i must have been looking at the flash drive being mostly empty, because my cache was at 89% full before i shut down. no torrents here all nzb. i just confirmed that my cache was not almost empty before the case swap. I must have been looking at the flash drive being almost empty. I always take screenshots and backup my appdata before i mess with anything.

I looked through fix common problems and it just has an issue with tatauii being in slave and a docker had an update. I cleared the notification and hasn't come back. I attached the diagnostic in case someone more knowledgeable than me wants to take a peek. really strange about my cache filling up again, maybe it was in the process of moving when i shut it down? tower-diagnostics-20200928-1301.zip

Alright, the swap is complete. Everything looks normal, except the fact that my cache drive is about full. I could have sworn that the mover had just moved everything over because it was close to full. i also just noticed:

Yeah, i 3d printed some of the trays. Ended up pony'ing up for the metal ones. They just didn't feel sturdy enough out of pla. Maybe abs would be better. I did add a second cage to the bottom, so i've got space to add 3 more drives + the multibracket one ontop of the basement. Did you use the built in fan controller? I'm not sure how they work with unraid....

Dang. Thats a lot to change! how do you like the define 7? After i unboxed it i was shocked with how well this thing is put together. Kinda sucked to have to buy extra hard drive trays, but not the end of the world.

I'm moving the server from a janky setup with 3d printed hard drive holders full of drives sitting on top of a silverstone case to a Fractal Define 7. What should i do to prepare everything for the swap? I'm thinking i'll make a backup (and store on a windows pc) of my appdata/flash drive and a screenshot of my Main tab. Anything else i should do? I'll make sure that my cache and parity drives are connected to the mobo and the rest on a hba card I'm hoping that something doesn't go badly, and i'm wondering why i tried to fix something that aint' broke.

gotcha. Thanks for the info. I'm on the hunt for a backup. i was thinking about getting a refurb hgst drive, but i think for the parity, i'll try to get something brand new.

interesting that it happened 30 days apart, and thats when i have my parity check done. Just a coincidence?

Thanks! I'm running dual parity, so that good, and i've got a record of it now so i can watch it to see if it increases at all. I think i'll grab a fresh drive just to be safe.

I just noticed that i have 35 errors on my parity drive. I accidently cleared the notifications so i couldn't figure out when it happened. I did have a parity check done on 7/1, and it completed and says with 0 errors. I ran an extended smart test (i think it took about 6-8hrs) and i've attached it along with a diagnostic. The smart test said that it completed without errors. Is this something to worry about? tower-diagnostics-20200707-2029.zip tower-smart-20200707-1554.zip

I went ahead and upgraded the cache after the mover didn't move the appdata. I ended up rebuilding from a backup from this morning and its back up and running.

I think i'm just going to replace the cache and rebuild it using the backup/restore appdata plugin

i didn't stop each docker, i just disabled the docker service from the settings menu. think that could be why? I figured it would stop the dockers before it disabled the service.