DigitalDivide

Finally got this working but not sure if this is what I was looking for. I have a share on my sever called Photos. I would like to share that folder so my family can browse the photos in it...I don't see how I can share that folder.. Geez. Exited out and now when I try to go back in by clicking webgui from the docker I get the site can't be reached! Edit: wow, seems it takes a long time until I can access the gui. Took about 15min but it's there. Still looking for help on how to share my photos share on my server....

Ok, so tried installing this docker. Seems to have installed ok and docker starts, however I'm stuck on the login I get prompted to create an admin and password as well as enter in user id,, pass, server, local host etc I wasn't sure what to put in so I created an admin id and password, left the path at default, and for now put in ownlcoud for user name, password, server... Not sure what to do but whatever I did seems to have hung the page when I submitted it. I ended up restarting the docker but now when I go to the webui address I get gateway timed out...I restarted the docker again and still times out...how do I clear this? THis is driving me crazy. I cannot get this docker working. I uninstalled and reinstalled Then created the admin id with password This time instaed of the default I put in /data I put in the defaults for user, pass, database as owncloud. For localhost I left it as "localhost". When I click Finish...it just sits there and comes back gateway time-out. What the heck am I missing here?

Asking this question here as owncloud was suggested as a possible solution. I would like to share my Photos share on my server with some family members. These are photos of my trips. Would owncloud be the way to go? Does it allow me to create a user id and password that they can use to login and view my photos? As well, how easy is it to setup for something like this? I currently upload my photos to smugmug but thought I could save some money by using my server.

THink I got it. It seems the vpn I was connected to was down. Just a quick question. When using airvpn, I seem to be able to create an ovpn file for a country or I can select an individual location. Just wondering if one is preferable to the other. Right now I selected country and I am now able to connect to the webgui but wondering if using country rather than a single location causes issues?

ok I disabled the vpn part and restarted and can now get to the webgui...I'm guessing that means I have a problem with my vpn...but have no idea where to start...

For some reason I can no longer reach the deluge webgui. I noticed my torrents seemed to not be active so just stopped and started the docker. It starts fine, however when I go to the webgui it tells me the site can't be reached. For the webgui in the docker I have http://[IP]:[PORT:8112]/ my airvpn login is fine.Log for_ binhex-delugevpn.html Not sure what happened....

Ok, thanks. Rebuilt the cache drive....we'll see what happens..

How woudl I go about recreating my docker image? It's been quite a long time so don't remember how to do that. Are there any step by step instructions anywhere. Thanks for the assistance, much appreciated!

Sorry here you go, array startetower-diagnostics-20200506-2339.zipd

Attached is my stower-diagnostics-20200506-2153.ziptower-smart-20200506-2152.zipmart report and diagnostics...if that helps

I seem to be having a problem with my dockers. Two weeks ago I replaced my cache drive as it appeared it was probably dying. After replacing the drive, I since then have restored my docker files and did a reinstall of my dockers. They load up find and run for about a week, then eventually two of them just stop running. The two are Emby Server and Sonar. If I try to restart them I get Error 403. If I try to stop my other two that are running, Jacket and Deluge VPN, I also get error 403. If I try to stop or reboot my server, it won't as it can't stop the two dockers so I have to do a manual power off. When I reboot, the dockers work fine for a week, and it happens again. Prior to replacing the cache drive I also updated to the latest version of unraid from version 6.5 I believe. I find it hard to believe the problem is with my cache drive or docker...but don't know for sure where the problem lies... Any suggestions?

Is there a way I can delete all my dockers, which will also remove the docker image totally, then reinstall them one at a time? THen just copy over the config files? If I were to copy over the config files for my current settings, what files would I need?

Hmm I noticed all my dockers are having the same problem now. Any suggestions on what to do? Is there a way to force a docker to stop. I have two dockers that I can't seem to stop. Just gives me error 403.

Looking in the settings I see for WebUI it shows - http://[IP]:[PORT:8989]/. Just mentioned as the post above mine mentions <serverip>

I'm having a problem with Sonarr. For whatever reason the docker stopped. When I try to start it, I get Error 403. If I look in the log I just see this repeating. I had to replace my cache drive last week and did a backup and restore. Everything started fine and was running until this morning. Both Sonarr and Jacket won't start. ErrorWarningSystemArrayLogin e":"open /var/lib/docker/containers/2daa40ecfa6af24c40517904faee79baa7370e8f527b4ba233a179b75f83351e/2daa40ecfa6af24c40517904faee79baa7370e8f527b4ba233a179b75f83351e-json.log: read-only file system"} e":"open /var/lib/docker/containers/2daa40ecfa6af24c40517904faee79baa7370e8f527b4ba233a179b75f83351e/2daa40ecfa6af24c40517904faee79baa7370e8f527b4ba233a179b75f83351e-json.log: read-only file system"} e":"open /var/lib/docker/containers/2daa40ecfa6af24c40517904faee79baa7370e8f527b4ba233a179b75f83351e/2daa40ecfa6af24c40517904faee79baa7370e8f527b4ba233a179b75f83351e-json.log: read-only file system"} e":"open

Lately I seem to be having a problem with Deluge VPN. It will run fine for a week or maybe two, then all of a sudden I notice no uploads occurring. Which is suspicious. I stop the docker and restart. As soon as I do, the torrents start uploading. This has been happening for maybe a month or a bit longer. Every week or two I have to restart it. Not sure where to look to see what's going on. Any assistance is appreciated. Attached is the log. Log for_ binhex-delugevpn.html

Got everything restored and working. So far so good! Can't live without my Emby

Ok, thanks...here goes nothing...

I guess this is the right place to ask this. I backed up my cache drive, appdata, due to a bad drive. I've replaced the drive and started the array. D I just noow go to Restore and do a restore? Then reinstall my dockers one by one? I'm a little unclear on the step by step process. Any guidance is appreciated

Ran into a small snag. On the restore tab it says to first recreate my docker.img if necessary. DO I need to do this? I thought doing the restore would do this. From what was indicated earlier above, I just replace cache drive and do a restore, then reinstall each docker one at a time.

Ok, so I popped in my new cache drive but it comes up as unmountable unsupported partition layout. I'm assuming it's because I haven't formatted it. How do i format it? Edit: Nevermind found it. Is there a way to do a full scrub on it and thoroughly check it out and maybe fix any corrupted blocks once it's in the array, other than running a preclear? I had to quickly pop in a spare drive I had that was sitting around. Just want to make sure all is good on it.

I don't have anything else other than 4 dockers. Just about finished backing up.

I did discover the CA backup/restore plugin. I am doing a backup which has been running overnight. I forgot to exclude my deluge download folder which was full of movies. Rather then stop it and restart without that folder I'm going to let it finish. So once I replace the cache drive, I would then do a restore using the plugin, then install the dockers one by one. I guess I'll have to see what other steps need to be taken once I install the dockers. I'm guessing when installing them, they won't automatically see the config folders and I have to point them there? Hard to picture it now as it's been a long time since I installed them. If I get stuck, I guess I can always come back here with a question.

If it is my cache drive going and I need to replace it, what is the best way to backup my dockers? Can I simply copy the folders off my cache drive, replace the drive, reinstall the dockers, copy back the folders from my back, and start up the dockers and all settings will be the same?

Here you go. Now that you mention it, I've been having issues copying files from the cache drive lately. Speed will start out strong then drop to 5mb a sec...Maybe I have to replace it....? tower-diagnostics-20200418-1629.zip