Gico

If I pause a restore operation, stop the docker/server, and then restart them, could the restore operation resumed?

We consider our home network a safe one, but still add SSL as an extra security layer. In the same manner some dockers (as Krusader) need to be protected. A password is one way, but also shutting down the docker when it's unused. I wonder if there is a way for a docker to shutdown when it's unused for X minutes. In this case: when there is no VNC session for a configured time.

I ran unBALANCE today after a long time without using it. I ran into the http-->https problem and manually changed the address. Is there a permanent solution? I didn't follow the entire thread to find out. Than I had a permission error when unBALANCE ran as "nobody". Why doesn't the "Plan" mode check for/alert about this error? Anyway I changed it to run as some user and now it can delete the source files, however when I use the rmsrc button, all the other lines turn into little un-clickable yellow v status (image attached), and I have to reload the page in order to click another rmsrc button, but refresh button doesn't work (I'm getting {"message":"Not Found"} ), so I have to re-enter the plugin in order to run one more rmsrc button. Don't tell my wife, but cleaning dishes is more rewarding task than this one ?

This is global a search through the entire community. I don't see any option to select a Forum, so obviously not a subforum or a thread. That's not an effective search. I have a question regarding a specific docker container. I won't read the entire support thread to search for a specific issue, and without a good search I might ask a question that already been answered.

I remember that there was an option to search within a specific forum/topic/thread, but now all I can see is the global search at the right top of the screen, and it doesn't have this functionality. Am I missing something? Any other option to search within a forum/topic/thread? Thanks.

Restore the data of a a single app - only manually? I don't mind doing that (although the backup is in one big nasty zip because of Plex), only concerned for any (lack of) authorizations issues.

Thanks a lot for this plugin, Squid. 1. I set it months ago to compress, and it does, however on the plugin settings it says "No" for "Use Compression?". 2. I also have a Plex library with about 1M files. Krusader fails to open the 21GB tar file, so I have doubts whether in time of need I will be able to restore from it. Can the plugin offer an option to restore to a different folder? This option can be used for recovery drill, and also good for comparing what files have changed between backups.

I have precleared a drive, and it ended successfully, but it doesn't show as precleared in Unassigned Devices list. I precleared it again and got the same result. Any thoughts? How can I check if it is indeed has the preclear signature?

Great plugin! Until I found it had to monitor a Windows PC which moved folders from one unRAID disk to another. Is there a reason that the selected folders are not deleted? Their content is moved and deleted, but empty folders (the selected top level) are left in the source disk.

Yes, that did it, thanks .

Hopefully a stupid question, but did you update FCP? Show a screenshot of the error as if its still present it should have changed slightly. Its not showing on my systems after the update Good question but yes, I updated FCP. It says version 2017.02.03b now. Screenshot attached.

Still having this error message. Restarted chrome, closed all chrome windows on all relevant PCs, and still have this error.

Ding Ding, we have a winner, that appears to exactly have been the case for that issue, now a new issue: Warning: basename() expects parameter 1 to be string, array given in /usr/local/emhttp/plugins/fix.common.problems/include/tests.php on line 837 when accessing FCP via Settings just above the "Errors Found" section. Cheers! Same here, right after 6.3.1 upgrade. Restarted (Chrome) browser and still having this warning.

Sure I could try this but the net 1st rule is: Someone already solved this. Anyway, Kodi crashes when I do that. 20:50:12 T:8332 ERROR: SQL: [MyMusic56] Undefined MySQL error: Code (1932) Query: SELECT idVersion FROM version I guess that could have worked if both containers had the same MariaDB version. I will have to export/import the databases.

I migrated today from Needo's MariaDB container to Linuxserver's: Removed Needo's and installed Linuxserver's with the same data folder. It seems that nothing was migrated: I can see none of the DBs or the user ID I was using (Kodi). Looked into the appdta/MariaDB folder (configured as /mnt/cache/appdata/MariaDB), and it looks like Needo's container kept the DBs in the root folder, whereas Linuxserver's keeps them in "databases" sub-folder. What am I doing wrong? How should I migrate? I have a backup of the appdata folder so can revert back to Needo's. Edit: Reverted back to Needo MariaDB until I will understand the migration process.

i think this may be related to this email from dockerhub Dear Docker Hub User, TL;DR: If you use Pull-By-Digest, remember to upgrade to Docker Engine 1.10 by June 1st 2016. On June 1st, 2016, we're upgrading Docker Hub to support the newest version of the Docker image manifest format. This will allow us to support images in multiple architectures and for multiple operating systems later. This upgrade also changes how Pull-By-Digest works. This means that older Docker engine versions (1.7 to 1.9) won't be able to use Pull-By-Digest for images published by newer Docker versions (1.10 and later). We see that you're using Pull-By-Digest with an older version of Docker Engine. If you don't upgrade, you'll only be able to use pull-by-digest on images published by older versions of Docker, and you’ll need to change your pull method to specify individual tags for some Docker images. We want you to be able to use your preferred pull method on images published by any Docker version. To do this, you should upgrade to Docker Engine 1.10 by June 1st, 2016. You can download Docker 1.10 here: https://www.docker.com/products/docker-toolbox For more information on Image Manifest Version 2, Schema 2, please visit: https://github.com/docker/distribution/blob/master/docs/spec/manifest-v2-2.md Thank you, The Docker Hub Team hallelujah! Thanks a lot. I'll wait and see if any solution will be agreed upon following this discovery. Edit: New thread created in "Docker Engine" forum regarding this issue.

Not only your containers. Can't pull mace's Qbittorrent docker too. DNS is set to my router's ip address, but I changed it to Google's DNS servers and no change - still can't pool your docker images. I can pull other images from dockerhub so the DNS was a long shot anyway. I tried dockerhub forums, and will try again, but is the another way to download a docker image and install it? I don't know anything about unix, but the installation command is in the log so I guess it can be run manually (?).

I have a problem pulling any of LinuxServer docker images. Error pulling image (latest) from linuxserver/mariadb, endpoint: https://registry-1.docker.io/v1/, HTTP code 400. Error pulling image (latest) from linuxserver/mariadb, HTTP code 400. TOTAL DATA PULLED: 0 B Any way to see log/debug the pull request? Alternatively how can I manually pull and install the docker images? It's been like that for weeks and I'm quite desperate here. Other dockers, even from the same docker hub server, are pulled successfully. Thanks.

Hi, I am unable to create the container, seems my unRaid (v6.1.9) server is unable to pull the image. This is my first container, however I have managed to install/update apps/plugins, so the server has internet access. Pulling image: linuxserver/mariadb:latest IMAGE ID [74de922b9e36]: Pulling image (latest) from linuxserver/mariadb. Pulling image (latest) from linuxserver/mariadb, endpoint: https://registry-1.docker.io/v1/. Pulling dependent layers. IMAGE ID [f7eef3e8d2a5]: Pulling metadata. Error pulling dependent layers. IMAGE ID [74de922b9e36]: Error pulling image (latest) from linuxserver/mariadb, endpoint: https://registry-1.docker.io/v1/, HTTP code 400. Error pulling image (latest) from linuxserver/mariadb, HTTP code 400. TOTAL DATA PULLED: 0 B Any ideas? Edit: The problem is on my server. A different docker, same result. Still....have no clue what causes it. Pulling image: gfjardim/crashplan:latest IMAGE ID [aee938d09f63]: Pulling image (latest) from gfjardim/crashplan. Pulling image (latest) from gfjardim/crashplan, endpoint: https://registry-1.docker.io/v1/. Pulling dependent layers. IMAGE ID [f7eef3e8d2a5]: Pulling metadata. Error pulling dependent layers. IMAGE ID [aee938d09f63]: Error pulling image (latest) from gfjardim/crashplan, endpoint: https://registry-1.docker.io/v1/, HTTP code 400. Error pulling image (latest) from gfjardim/crashplan, HTTP code 400. TOTAL DATA PULLED: 0 B

Thanks Squid. FSP Aurum Pro 850W - Anyone knows this manufacturer / PSs?

How can you tell how many rails for the 12V? I didn't see anything regarding this issue in Corsair's and Seasonic's web sites. Which PS series of these two manufacturers are single 12V rail?