francispb

I’ve had a very similar experience. I tested OpenCloud a few weeks ago and, for light usage, everything works fine: I can upload files, sync with the Windows client, and overall it seems stable. The problem starts when I try to migrate my main library (around 500 GB). Whenever I push a large amount of data, the container hangs and then my entire Unraid box becomes completely unresponsive, forcing a manual reboot (hardware reset). I’ve reproduced this using three different methods: – syncing via the Windows client – uploading through the browser – copying files directly into the mounted folder Every method leads to the same freeze. I’m also keeping an eye on the project because I really like the idea of a slimmer alternative to Nextcloud, but right now it still feels too unstable for production due to these crashes.

I'm sorry, here is the diagnostic file. servidor-diagnostics-20241105-1328.zip

I added an older Nvidia GT 630 GPU to my Unraid server with the goal of using it for video transcoding in Plex. I installed the "Nvidia Drivers" plugin and tested all available driver versions, up to v470.239.06, which, according to Nvidia’s website, should support this model. However, within the plugin, I receive the following message: "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running." How can I resolve this?

I changed several settings, saved, and rebooted, but it didn’t work. I found some posts suggesting the issue might be in the go file, so I modified it, saved, rebooted, and still no success. I decided to stop troubleshooting and reinstall Unraid from scratch on a new flash drive. Since I use only a few apps, it took about two hours to reconfigure everything, which ended up being the quickest solution. Thanks, everyone, for the help!

I don’t have a cache pool, and I never have. In the share settings, I couldn’t find where to change it to use the array instead. Below is a screenshot of the share settings. Thanks in advance for your help!

I rebooted the system twice and waited a long time, but Docker still doesn't start. Here is the diagnostics file. servidor-diagnostics-20241031-1121.zip

I booted into safe mode, and the system initially operated normally. However, as soon as I started the array, the system slowed down again, even while in safe mode. I then stopped the array, disabled Docker, and started the array once more, which resolved the performance issue. This leads me to believe the issue may lie with Docker or one of its containers. I came across a forum post suggesting that I could reset Docker by deleting the docker.img file. I followed this advice: I stopped Docker, deleted the docker.img file, and attempted to restart Docker. However, now when I enable Docker in Settings > Docker, the status shows as "Stopped," and on the Docker tab, I receive the message: "Docker service failed to start." I’m uncertain how to resolve this. Any advice would be appreciated.

Hello everyone, I'm using a small NUC as a personal server, running Unraid 6.12.13 with the applications Immich, rFlood, and Plex installed. The server has a single array with a 256GB SSD, a 1TB SSD, and a 5TB HDD. Everything was working perfectly until this past weekend when I started experiencing severe slowdowns, especially when using Immich or Plex. On the dashboard, I notice that one or multiple CPU cores are often at 100% usage, even when I’m not actively using the server. I’ve tried restarting several times and even recreating the array, but nothing has resolved the issue. In the Docker tab, I frequently see the message: "Please wait... starting up containers," which sometimes stays for hours. When it finally disappears, many containers remain in a stopped state. If I try to start them manually, the Unraid loading icon stays on screen for a long time before eventually failing. I'm unsure what could be causing this — it could be a disk failure, memory issue, CPU problem, USB drive error, or something else. I’m not sure where to begin or how to troubleshoot each component. I've attached the diagnostics file below. Any help or advice would be greatly appreciated! Thank you! servidor-diagnostics-20241030-0853.zip

I'm only using the container to route other containers through the VPN. With all containers it has worked except binhex-plexpass, it is localy inaccessible even though I configure port 32400 on binhex-privoxyvpn, does anyone know why this happens and how to solve it?

After install grafana and open Grafana's WebUI, the page that opens is an error: This page is not working, ERR_TOO_MANY_REDIRECTS I realize that the browser address is repeating the IP of my Unraid server, when I force the address to 192.168.1.100:3000/login I get this message: But I don't use proxy or reverse proxy. How do I resolve this?

I tried to follow the tutorial, but when I get to the step of opening Grafana's WebUI, the page that opens is an error: This page is not working, ERR_TOO_MANY_REDIRECTS I realize that the browser address is repeating the IP of my Unraid server, when I force the address to 192.168.1.100:3000/login I get this message: But I don't use proxy or reverse proxy. How do I resolve this?

I installed Jackett Sonarr and qbittorrent, I configured all of them, the green check appears in all steps, I added a series in Sonnar, defined the folder, and nothing happens. The missing episodes are in the missing tab but it doesn't forward to the qbittorrent download. I manually searched within Jackket for episodes and it shows me several options within the indexers I added, but in Sonnar it shows as not found. Does anyone have any idea what's going on? sonarr.txt

Guys, I need help, I'm a beginner in unRAID, and my language is not English, I'm using Google translator. I did a clean install of unRAID, installed Jackett, Sonarr and qbittorrent. I followed several tutorials on how to configure each one of them and at first I thought everything was working fine. All the check fields gave me Ok, but when I put a series in Sonnar nothing happens. It says that the series files were not found on disk (really?) and does not forward the missing files to qbittorrent for download. I will describe the step by step I did with images, at the end there is also the sonnar log. I hope you can help me First in the unRAID WebUI I went to Apps, installed Jackett (linuxserver), accessed Jackett's webUI, clicked on "+ Add indexer", to test I selected the first public from the 1337x list, clicked on test, and the symbol of green check. So far so good I thought. For real proof that Jackett was working I clicked on the search symbol and searched for "Daisy Jones" Jackett returned several episodes in 1080p which is what I wanted for my test, so I think Jackett is managing to fetch the files successfully. Second step, I installed Sonarr (linux server), accessed its webUI, went to Settings > Indexers, selected Torznab, went to Jackett and copied the link and API key, selected the TV categories, clicked on test, it gave the symbol OK sign, I clicked Save. With the indexer and the download client installed and apparently OK, I went to Sonarr's home page, selected the "Daisy Jones" test series, chose the folder I wanted, set it to monitor all episodes, standard HDTV-1080p quality, and clicked Add . Then nothing happens, I access the series that now appears on the home screen of Sonarr and it shows me the three episodes that were released with a point of attention (!), in my qbittorrent no torrent was added. I click on the search symbol, the completed message appears in the lower left corner, but nothing happens, I click on a person symbol, a window opens informing me that no results were found. What's going on, in the guides it's so simple and easy, I don't know if you need more information, as I said I'm super newbie, if you need it tell me the step by step to get it. sonarr.txt

I tested it and it worked very well

My server is a NUC with a Celeron N5095 processor (4/4), Unraid version 6.11.5, I followed this tutorial and it didn't work, the plex kept doing the transcode without Quicksync. I spent days trying to solve it until I found a solution in another thread. I had to access the terminal and enter 3 commands: rmmod i915 echo "options i915 enable_fbc=1 enable_guc=3" > /etc/modprobe.d/i915.conf modprobe i915 I had a problem when I typed rmmod i915, the terminal replied that it was in use. Even stopping all server processes it still told me that it was in use, I solved this by adding these 3 commands to the /boot/config/go file so that these commands were executed during system startup. I don't know if this is the easiest and most safe way to solve it because I'm a linux newbie, but that's what worked for me here.

Thank you very much, I was trying to make the plex transcoding work for days and I couldn't, now it worked.